Tekan eksentrik - satu kolom

SCHULER C63/315

Tahun pembuatan: 2002, Kondisi: bekas, Press force 63 t Throat depth 315 mm Stroke 8–100 mm Strokes per minute 140 spm Ram adjustment 63 mm Table size 1200 x 630 mm Ram surface 800 x 315 mm Passage opening in table Ø 110 mm Table height 820 mm Ram bore Ø 50 mm Shut height 335 mm Total power requirement 7.5 kW Machine weight approx. 5 t Pneumatic clutch/brake combination Central oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand control Kdodpfxslp U D Ts Afijk Foot control Roller block rails in table Hydraulic clamp on ram Compensating cylinder Approved for manual loading operations

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard configuration with Flow Control, Thermal Control, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features add approximately €400 in value at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical; in our opinion, the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, Long – Each machine is supplied with a 5-meter-long connection hose package between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach work areas! The connection hose is neatly stored on a hook at the side of the unit. (Hooks manufactured by us) ➤ Fronius Large Trolley – Arguably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With Up/Down current regulation on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This set can weld nearly all materials, including aluminum, steel, and stainless steel (V2A). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in the sheet metal trade. Other options available at extra cost, e.g. Fronius Aw4000/Aw5000 Job Master Torch Package (torch with display) + €550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? To clarify, we purchase almost-new pre-owned machines, disassemble, check everything thoroughly, replace any wear parts as necessary, and only after successful test welding release the machine for sale. "All" machines are clean and have no burn marks on the displays, nor are they riddled with burn holes or dents! You are purchasing an item from us that is also ⭐visually appealing and not completely worn down! ►►►Do we get an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment methods are available? Advance payment or cash on collection in person. ►►►Why buy from us? Kdedpfx Afswbil Soijk We are professionals specializing in this Fronius welding machine series and always keep 60–80 machines in stock – exclusively Fronius, no other brands! We know these machines inside and out and do not sell anything we are not familiar with.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A high-precision Takisawa CNC lathe with dual spindles is available. Spindle power: 2x 7.5 kW, speed: 5,000 rpm, spindle nose: F-80, tool holder: 2x 5 positions, max. turning diameter: 50 mm, max. turning length: 50 mm, max. workpiece weight: 2x 0.5 kg. Machine dimensions X/Y/Z: approx. 2,600 mm/2,550 mm/2,150 mm, weight: approx. 4,300 kg, control: 2x Fanuc Oi-TF, operating hours: 11,179 h. Includes rear chip conveyor, automatic central lubrication, full machine enclosure with coolant pump, portal loader type D, Raku Raku loader, reversing station, automatic loading/unloading doors per spindle, and discharge chute for inspection parts. Documentation available. On-site inspection possible. Kodsu Dm Izjpfx Afiodk

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Kodpfekvnumjx Afisdk Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 265864, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 35 rpm, jarak pergerakan sumbu X: 195 mm, jarak gerak sumbu Z: 560 mm, daya motor spindle: 15 W, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan sumbu Z: 33 m/menit, torsi: 233 Nm, jarak dari tengah meja ke hidung spindel: 687 mm, Perlengkapan: dokumentasi / manual, Mazatrol Smart-Steuerung. Spindeldrehzahl: 5.000 min⁻¹. Verfahrweg X/Z: 195 mm / 560 mm. Ausgestattet mit einem Spannfutter, Ø 215 mm. 3-Backen-Kraftspannfutter. 12-fach Revolver. Reitstock. Kdjdpfx Afsvfm H Aeijk Werkzeugvermessung. Teilefänger.

Kondisi: baik (bekas), Tahun pembuatan: 2001,

Kondisi: bekas, Tahun pembuatan: 2009, panjang total: 5.500 mm, lebar total: 2.300 mm, tinggi total: 2.900 mm, trans_01 Kjdpfxjxrl Hdj Afiodk

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm Ksdpelgvkisfx Afijdk - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler Kdsdpfxshigmbo Afisk ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: baik (bekas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Kodpfx Aed Tx Ahsfisdk