SCM P80 mesin pemotong panel

SCM GABBIANI P80

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Working table height mm: 950 Number of standard clamps: 5 Number of clamps for versions 33/38/43: 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (Opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (Opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (Opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed ( ) m/min: 60 MAIN SAW BLADE Motor power (S6 -40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Rotation speed – 50Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade shaft diameter mm: 80 SCORING SAW Motor power (S6 -40%) - 50Hz kW (HP): 1.5 (2) Rotation speed – 50Hz rpm: 5850 Scoring blade diameter mm: 200 Scoring saw spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Machine base voltage Euro voltage (400 V / 50 Hz) Compressed air requirement NL/min: 300 Required air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction spigot diameter mm: 4x120 ( ) Note: For countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL CHARACTERISTICSAutomatically controlled horizontal panel saw with PC/PLC control unit, for cutting panels of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame constructed as steel tube design - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Guide wheels made of hardened and ground steel - Balanced mass distribution for best cutting quality - Direction of travel against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5 years warranty), protected by special dust wipers - Pneumatic switch for fast and safe change of main saw blade and scoring bladePressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to avoid collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam for cleaning the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes.* Travel: 1200 mm* Minimum working width: 60 mm* Maximum working width: 1200 mmPositioning pusher and rear section of the machine - Positioning pusher over the entire length with motor drive via a robust shaft. Positioning pusher... Dsdox Twcvspfx Ahusur

Kondisi: baru, Tahun pembuatan: 2025, EN-001 Dedpfx Ahopq If Dsuour

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system Dodeidi Ivspfx Ahueur • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit • Ionization

Kondisi: bekas, nomor mesin/kendaraan: 008395, arbeitsbereich_achse_x_3050_mm_arbeitsbereich_achse_y_1250_mm_le istung_hauptspindel_10_kw_anz_kontrollierte_achsen_3_achsen_anzah l_bohrspindeln_27_anzahl_werkzeugplatze_8 Djdpfx Ajygtcqohuour

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Used Horizontal Panel Saw Manufacturer: Holzma Dujdpfx Aeymx S Dehujr Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (2-track element): 9 units Clamping grippers: 7 units, first 3 are 2-finger grippers Air cushion table, width 650 mm: 4 units, each 2160 mm long Central blower: 1 unit with increased blower capacity – 3 angled-lift clamping grippers (2-finger design) – 1 angled-lift clamping gripper (1-finger design) – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1 – 150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. pressing width 0 mm; max. pressing width equals full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18kW: 28 kW Power Control CADmatic 4.0 control system with 17" flat display Labeling system with part graphics / labeling software / label printer PICA 104

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm Dujdjxranpspfx Ahuer • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Gergaji BIESSE Selco WN2 bekas - Kontrol OSI - Printer label - Tahun 2017 - Tersedia April - Tinggi potong 60mm Djdoyrr U Nopfx Ahuour - Kecepatan 1-80 m/menit - Ganti mata gergaji cepat - 4 meja bantalan udara

Kondisi: bekas, nomor mesin/kendaraan: 008381, arbeitsbereich_technische_daten_001 Dsdpfxex Swc Ho Ahueur

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Dusdpfx Ajxy Tmnshuor Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2011, Besar area kerja pada arah X: 2770 mm Besar area kerja pada arah Y: 1220 mm Ketebalan pemrosesan (ukuran Z): 80 mm Konstruksi mesin: mesin portal Daya spindle utama: 11,0 kW Kecepatan spindle utama: 1500 - 24000 rpm Spindle dengan kontrol vektor: Ya Sistem penjepitan: HSK 63 F Pendingin spindle: Pendingin udara Jumlah sumbu: 3 Penukar alat: Ya Tempat alat: 10 unit Keyboard mesin tik: Ya Mouse: Ya Sistem program: Xilog Plus DXF Interface: Ya Koneksi online memungkinkan: Ya CD Rom Drive: Ya Tipe meja: meja grid Sistem pemberhentian: silinder pemberhenti Jumlah pompa vakum: 1 Kapasitas pompa vakum: 250 m³/h Pengaman: alas pijakan keselamatan Lokasi gudang: Sonnefeld Dodovvi Htspfx Ahusur