Gergaji multi-bilah

SCM M3

Kondisi: bekas, Used machine Features and Technical Data: High-performance multi-blade saw Heavy cast iron construction Dedpszbv Hzsfx Aidouu Robust transport chain made up of directly interconnected precision links Wear-resistant guiding surfaces of the transport chain with extremely low coefficient of friction Automatic chain lubrication Quadruple saw shaft bearing for maximum stability Saw bush with tapered seat and self-centering 4 pressure rollers for accurate cuts even with thin workpieces 4 rows of slitter and anti-kickback fingers Cutting height up to 110 mm with 350 mm saw blade diameter Minimum cutting length: 250 mm Clamping width of the saw bush: 300 mm Minimum and maximum saw blade diameter: 200 / 350 mm Saw shaft speed: 4200 rpm Feed speed: 4–48 m/min Transport chain width: 300 mm Saw bush diameter (with 2 wedges 20 x 5 mm): 70 mm Work table height: 750 mm Extraction connection diameter: 200 mm Airflow at 25 m/sec: 3500 m³/h Motor: 25 kW Feed motor: 1.1 kW With laser guideline Weight: 1800 kg Sound emission: 98.3 dB(A) at idle without extraction In operation: 107.1 dB(A) Workplace-related emission value: 81.8 dB(A) at idle without extraction In operation: 91.2 dB(A) Availability: short-term Warehouse location: 63934 Röllbach

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Dujdpferigxysx Aidju Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: baru, Tahun pembuatan: 2025, en:Tischfräse minimax twf 55 es M 3 UP Professional joinery machine with motorized height and tilt adjustment of the milling spindle, four speeds, and electronic control system Article Number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminum sliding table ✔ Handle on sliding table ✔ Milling fence FLEX ONE: Heavy-duty professional design, automatic adjustment of the entire milling fence according to tool diameter, manual chip removal adjustment, fence swiveling device, aluminum fence jaws with connecting rails Spindle height adjustment motorized Telescopic mitre fence with two flip stops Spindle tilt adjustment motorized Supporting table ✔ Control system Ready 3: Programmed movement of the milling unit in two axes, automatic adjustment of the entire milling fence based on tool diameter, stepless adjustment via switch or automatic positioning system Duedpehp Rc Iofx Aidou Curved workpiece guard ✔ Positioning of control elements Operator panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and Weights Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Suction port diameter 2 x 120 mm Work Table Table length 1200 mm Sliding table length 1200 mm Table width 530 mm Sliding table width 360 mm Table height 900 mm Sliding table height 142 mm Setup Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Explanation of space requirement: The dimensions include maximum traversing paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Explanation of working area: Add the listed dimensions to the space requirement to determine the recommended free floor area for the machine. Electrical Data Supply voltage 400 V Drive motor power 5.0 kW Mains frequency 50 Hz Milling Spindle Spindle tilt 0 to -45° Milling spindle speed display Control system display Usable spindle length 125 mm Spindle shaft diameter 30 mm Spindle speeds 3500/6000/8000/10000 rpm Milling Tool Diameter (Max.) Maximum tool diameter 240 mm Maximum profiling cutter diameter 240 mm Maximum retractable tool diameter 230 mm

Kondisi: sangat baik (bekas), 7863 Duodjzbavgepfx Aidju

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jarak pergerakan sumbu X: 2.100 mm, jarak lintasan sumbu Y: 3.050 mm, jarak gerak sumbu Z: 400 mm, jumlah sumbu: 4, daya motor spindle: 9.000 W, el Dusdox E Efvopfx Aideu

Kondisi: bekas, Tahun pembuatan: 2019, including tools CNC CONTROLLED MACHINING CENTER Morbidelli M100 Drilling and Milling - Made for You! This numerically controlled machining center is equipped with a comprehensive range of tools for milling and drilling, capable of meeting every woodworking requirement. - Maximum performance - with drilling spindles at 8,000 rpm and cutting-edge technology, featuring the most robust spindle available on the market, with over 1,000 hours of maintenance-free operation. - Optimal and fully equipped - the suction cups can be individually configured with the TV FLEX worktable to tailor the machine to specific requirements. - Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame allows full access to the worktable at any time. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE variant, no additional structural safety measures are necessary. Supporting Structure The supporting structure consists of an exceptionally sturdy monolithic steel base, highly ribbed and robust. The particularly wide base provides the machine with exceptional stability, ensuring consistent precision under all working conditions. The machine does not need to be anchored to the floor. The base forms a large and solid support for the movable gantry: the working unit is equipped with a balanced, stable, and resilient support that withstands the highest loads, ensuring superior performance and greater accuracy. The moving gantry consists of a solid, single piece anchored to the base and travels on high-quality prismatic guide rails with ball bearing blocks. The working unit is mounted on it and moves along the Y and Z axes, also on prismatic guides with ball bearing blocks. Movement of the lower moving unit (X-axis) and the working unit along the traverse of the moving unit (Y-axis) is achieved via helical rack and pinion drive, resulting in increased tooth-on-tooth engagement for greater acceleration and higher speed along the X and Y axes. The specifically designed helical gearing reduces wear on mechanical components and ensures quieter operation. The vertical Z axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and strong acceleration/deceleration. The main milling unit is directly connected to the Z-axis carriage, ensuring highly precise finishing as vibrations are completely eliminated. Travel along the X-Y-Z axes is powered by brushless motors driven by static inverters, offering: - Reduced machining times thanks to improved acceleration - Better positioning accuracy due to high-resolution encoders - No setup required when powering the machine up, thanks to absolute encoders - Elimination of routine maintenance, as the brushless system contains no brushes Management of axis movement and, in general, the machine's operating elements is handled via an e Dujdpfxevvi Scs Aidsu

Kondisi: sangat baik (bekas), SCM M3 Track Multi-Blade Saw Track width: 300 mm Duedpfxom Rg Dgj Aidsu Maximum cutting height: 120 mm Main motor power: 37 kW Feed speed adjustable via variator: 6–45 m/min Blade diameter max/min: 350/200 mm Maximum workpiece width: 1000 mm Minimum workpiece length: 600 mm 3 rows of anti-kickback pawls Spindle diameter: 50 mm Sleeve diameter: 70 mm Centralized track lubrication CE certificate Extraction port: 200 mm

Kondisi: baik (bekas), Tahun pembuatan: 2020, de_Maschine Masterwood Project 351 L – 3-Achs CNC-Bearbeitungszentrum Beschreibung - Luftgekühlter 3-Achs-Fräsmotor, 17,5 PS (HSK-63F) - Statischer Frequenzumrichter zur programmierbaren Drehzahleinstellung 1.500–24.000 U/min - Werkzeugwechsler mit 22 Positionen - 6 pneumatische, absenkbare Anschläge für das Beladen/Ausrichten schwerer Werkstücke - Vorbereitung zur Montage von Spannsystemen - 2 horizontale Klemmzangen für Brettschichtholz - 6 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten auf der Rückseite der Auflagen) - 8 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten mittig der Auflagen) - Komplette Referenzierung auf der rechten Seite entlang der Y-Achse - Komplette Referenzierung auf der linken Seite entlang der Y-Achse - 2 Arbeitsfelder - 1 x 100 m³ Vakuumpumpe - 24 Vakuumsauger - Fernbedienung mit Digitalanzeige - Automatisches Werkzeugvermessungssystem - Transportband für Späne/Abfall - Bohraggregat mit 19 Spindeln (32 mm-Achsabstand), 2,2 kW - 7 vertikale Bohrspindeln in X-Richtung - 6 vertikale Bohrspindeln in Y-Richtung - 4 horizontale Bohrspindeln in Y-Richtung - 2 horizontale Bohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) - Steuerungseinheit inkl. PC - SINCRO CAD/CAM-Software MASTERWORK Technische Daten Dujdpfx Aovu U Iteidsu Arbeitsbereich X: 5.130 mm Arbeitsbereich Y: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückhöhe: 200 mm Fräsmotorleistung: 17,5 PS (S1) Drehzahl Fräsmotor: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugsystem: HSK63-F Werkzeugplätze: 22 Vakuumpumpe: 100 m³ Absaugstutzen: 250 mm Luftförderleistung: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Druckluft: 7 bar Druckluftverbrauch: 300–500 l/min Absicherung: 40 A Gewicht: 7.000 kg (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Kondisi: sangat baik (bekas), 7946 Duedpfxey Uxy Sj Aidou

Kondisi: sangat baik (bekas), track width 300 mm minimum workpiece length 390 mm minimum workpiece width 12 mm minimum workpiece height 8 mm maximum workpiece width 950 mm blade diameter 350 mm blade bore diameter 70 mm spindle speed 4,200 rpm main motor power 35 HP Dedswndqiepfx Aideuu variable feed speed adjustment 6-48 m/min worktable dimensions 1530x1100 mm machine weight 1,800 kg year of manufacture 2008 CE certificate

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Dodpjfzzhyjfx Aidouu - Available immediately - Total price: 17,000 EUR - Condition: very good

Kondisi: sangat baik (bekas), daya: 22 kW (29,91 hp), scm-m3-multirip-2024 Dusdpfx Aiezak Evodou

Kondisi: sangat baik (bekas), 7901 Duedey S Aakopfx Aideu

Kondisi: bekas, nomor mesin/kendaraan: 007227, Posisi 1: Mesin penempel tepi satu sisi HOMAG + LIGMATECH-KAL 310 + ZHR 05 Posisi 2: Sistem pengembalian panel HOMAG + LIGMATECH-KAL 310 + ZHR 05 Dedpfx Aijwuuc Ajdeuu

Kondisi: sangat baik (bekas), 7947 Dodpfsyx Untsx Aidsuu