Mesin Amplas Pita Lebar SCM Sandya 10S

SCM Sandya 10S

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Kjdpsrmucxofx Aahjfa Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Kfsdpfx Aaevvkfwshja

Kondisi: bekas, Tahun pembuatan: 2011, panjang total: 4.000 mm, tinggi total: 1.600 mm, lebar total: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No Kfjdpfewnickex Aahea - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units: 6 - 1st unit type: Premilling unit - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit - 5th unit type: Radius scraping unit - 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) - Transport weight [kg]: 1300kg - Number of transport packages: 1 Financial Information VAT: The stated price is excluding VAT VAT / margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any items from the industrial sector Yorick Diebels

Kondisi: sangat baik (bekas), Calibrating and Fine Grinding Machine with 1 Grinding Unit, 1 Motor, Processing from Above Kedoudxchjpfx Aahjfa Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min 1st Unit: Combination unit, grinding roller, rubber-coated, 90 Shore / pneumatically operated sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Approximate dimensions L x W x H: 1385 x 1980 x 1900 mm Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Abrasive belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 exit rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago MORE THAN 30 PCS WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical specifications subject to error and prior sale. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 437.0COLIBRI, daya: 8 kW (10,88 hp), sambungan udara terkompresi: 6 batang, frekuensi input: 50 Hz, tegangan masuk: 380 V, tekanan kerja: 6 batang, lebar benda kerja (maks.): 630 mm, Wide belt sander dalam kondisi baik untuk dijual. 2 rol untuk pra dan finishing sanding. 2 kecepatan pengumpan. Penyesuaian ketinggian secara elektrik dengan tampilan digital. Lebar pengamplasan 630 mm. 2 koneksi untuk hisap debu. Bantuan saat pemuatan tersedia. Kjdpfx Aajuh Sccehofa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, Costa calibration machine Kjdpfx Aaowmxh Tehsfa

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Ksdpfx Aaopugwijhsfa Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, en-GB Kfsdpjgi Dryefx Aahsa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, We offer you: Deburring machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical data and features: - Abrasive belt change on the left machine side - Tool set - Digital thickness indicator - Material feed at the infeed too strong - Electropneumatic control of the oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on or off - Machine with head adjustment (fixed working height 900 mm) - Lift system on 4 columns (spindle drive) with chain drive - Table extension at front and rear with one roller each - Industry 4.0 (LAN) package with LAN network connection - Working width: 1,350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height: 160 mm - Internal LED lighting - Electronic belt control for the longitudinal units - Calibration-grinding unit with sanding roller diameter 190 mm, belt length 2,620 mm - Electromechanical grit setting - The speed of the abrasive belt can be set via frequency converter - V-Spin unit with 15-disc grinding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row, counter-rotating. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removal of slag or oxides. - 16 support discs for V-Spin units, 80 mm diameter Scotchbrite + abrasive grain size 80 - 16 support discs for V-Spin unit, 80 mm diameter Tampico + abrasive grain size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads; each head is fitted with 3 pads for rotating sanding brushes, diameter 123 mm - Oscillating Scotch-Brite brush - Linear cleaning systems Kodjv Hxrgjpfx Aahofa - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5–7 m/min Conveyor belt made of HYPALON rubber, heat and oil resistant, hardness 60 Shore, with smooth surface - Belt cleaning blower for the conveyor carpet incl. extraction - IPC MONITOR 15" touch screen control for machine operation, up to max. 10 processing units The control system manages the following processes: - Start sequence of selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness controller - Acoustic and visual signals when the machine starts up - Operating hours counter - Automatic control of feed speed according to machining performance (expressed in sqm). This allows for longer abrasive belt life based on the statistics. The machine is in very good condition and comes with 2 Euro pallets of new abrasive belts. Accessories, depicted tools and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and details as well as prior sale are subject to change and error!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2012, nomor mesin/kendaraan: 925625, Kuka Unused stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1,412 kg Serial number: 925625 Includes connecting cables: X21/X31 (00-108-948) 25m and Kfsdpfx Aasrdh T Djhoa X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot Data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot motion speed in °/s Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Axis 5: 129°/s Axis 6: 206°/s