Mesin gergaji format

SCM SI 3200 N

Kondisi: baru, Format circular saw ALTENDORF WA 6 - Demonstration machine - manual height adjustment, double roller carriage, Gsdpfx Aju R Sx Eeh Rsip scoring unit, tilt function, outrigger table, angle/miter fence, automatic brake, can be lowered below table height ----- Technical data ----- tilt range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, tilt range of miter fence: up to 49°, speeds: 4,200 rpm, motor power main motor: 5.5 HP / 4.0 kW, motor power scoring unit: 0.5 HP / 0.37 kW, table height: 910 mm, extraction ports Ø: each 1 x 100 / 50 mm, weight: 450 kg - new demonstration machine -

Kondisi: bekas, en-bimatic-prima-7.5-two-edge-banding-machine-full-tech-specs Gisdowgwl Depfx Ah Rsp

Kondisi: bekas, 1 Giodpfx Aex Ux U Ajh Rop

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Three-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data entry via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cuts with extendable fence mm: 3200x3200 Tilting range degrees: 0°/ +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Giedpoyftzksfx Ah Rep Scoring unit speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note for used machines: • Technical data and prior sale subject to change and errors excepted. • Prices listed are ex-location – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Επικαριστική μηχανή Hebrock K36 με σύστημα ελέγχου PLC, δοχείο ταχείας θέρμανσης με επικάλυψη και χωρίς ανάγκη συντήρησης, με προεγκατάσταση για γρήγορη αλλαγή του δοχείου θέρμανσης. - Οθόνη αφής 10” - Μέγιστο πάχος ταινίας επικάλυψης 3mm - Ελάχιστο μήκος τεμαχίου 200mm - Ελάχιστο πλάτος τεμαχίου 80mm - Ταχύτητα προώθησης 10m/min - Έτοιμη για λειτουργία σε περίπου 5min - Μέγιστη κατανάλωση ισχύος 14kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Διαστάσεις μηχανήματος 5250x1230x1430 mm - Βάρος περίπου 1700Kg Επιπλέον • Κεφαλή προφρεζαρίσματος Whispercut, ύψος τεμαχίου 60mm • Θερμαινόμενος οδηγός τροφοδοσίας • Καμπύλωση γωνίας R = 2mm για μηχανισμό στρογγυλέματος γωνιών Gedpfewyu E Uox Ah Roip • Συσκευή ταχείας αλλαγής για τον κινητήρα μηχανισμού στρογγυλέματος γωνιών • Πολυγρανάζι ξυσίματος R2/R1 • 60mm ύψος τεμαχίου – στρογγύλεμα γωνιών • Μονάδα ψεκασμού αποκολλητικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικός ψεκασμός άκρων • Εξοπλισμός για nesting • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λόξευση) • Εσωτερικός LED φωτισμός • Εξοπλισμός για κοντά τεμάχια • Προετοιμασία για σύστημα επιστροφής (barbaric) • Πακέτο αξόνων / μηχανοκίνητες ρυθμίσεις ύψους, ακμής και προφρεζαρίσματος • Πρόσθετη στήριξη εισόδου και εξόδου τεμαχίων (450 mm η κάθε μία)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, F 90 format mesin potong, tidak dapat dimiringkan, perpanjangan meja, panjang meja sekitar 3000 mm, penyedotan atas, panjang sled 3000 mm, scoring blade, 1000 mm di sebelah kanan pisau, diameter mata gergaji 400 mm, tinggi potong maksimum 130 mm, berat 900 kg Giedpfx Ajyaq Ahsh Rsp Harga ex lokasi Pengiriman tersedia dengan biaya tambahan!

Kondisi: bekas, Tahun pembuatan: 2018, Edgebanding machine AKV 3006 DK - F with jointing milling unit, including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station for radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edgebanding material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutter (combination version) and cutter fine adjustment from the operator side - Spare positions for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment for the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregates viewing window from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1,550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic system including cooling and anti-static spray device, year 2014 1 pc. hot air unit for creating the optical zero-joint, for special edgebanding materials - Including pneumatic glue pot positioning - Including cooling and anti-static spray device - Including 2 additional quick-change edge channels - Including special version corner rounding cutter, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanding machines of the 3000 series (retrofit option available on request, extra cost) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min - Upgraded for 8 mm edge thickness, 1 pc. to maximum 40 mm workpiece thickness - Including pneumatic saw adjustment, special version, min. workpiece thickness 8 mm - 1 pc. 3-point pneumatic cutter adjustment - 1 pc. switching for radius/chamfer/flush for combination milling stations (eliminates manual adjustment at the combination milling station for the 3rd reference point, PLC control mandatory) Polishing station (buffing) - 1 pc. corner rounding cutter, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm Radius scraper - 1 pc. including pneumatic lift-off device, radius R 2.0 mm Flat scraper - 1 pc. with pneumatic actuation control Chassis, complete - 1 pc. glue station change system, including downward-facing glue discharge device (preparation only), no 2nd glue pot, machine is suitable for processing PUR adhesive Grooving saw unit, vertical, into the panel - 1 pc. including pneumatic lift-off device - Vertical groove Gijdsx S Hmzjpfx Ah Rop - Groove width 8.2 mm - Groove depth 8.0 mm - Distance from workpiece edge 14.0 mm - Special version grooving saw motor with increased power - 1 pc. exhaust extraction for jointing unit (connected to the machine's extractor manifold) Ball bearings for corner rounding cutter: 24.1 mm (1 pc.), 24.2 mm (1 pc.) Protective spray device - 1 pc. for the edge surface for sensitive edgebanding materials Spray device for panel, combined (release agent and cleaning agent spray device) Location: Suppli

Kondisi: sangat baik (bekas), Mesin Gergaji Panel SCM Si400e 9/24 Spesifikasi teknis: Panjang meja geser: 3200 mm Pengaturan sudut gergaji secara elektrik Giodpfjw Rkz Ssx Ah Rep Pengangkatan gergaji secara elektrik Pengaturan pagar pemotong sisi kanan secara elektrik Lebar potong di kanan: 1270 mm Ketinggian potong maksimum: 130 mm Putaran gergaji dapat diatur dengan sabuk Putaran scoring saw: 6500 rpm Pelindung Sakelar pengaman Daya motor utama: 5,5 kW Daya motor scoring saw: 0,75 kW Dimensi keseluruhan: Tinggi: 1400 mm Lebar: 4300 mm Panjang: 3550 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, Tegangan 400V 3~ 50Hz 7,22kW Panel kontrol dengan tampilan LCD dan keypad Godoyf I T Uopfx Ah Reip Unit penambahan dengan 2 pisau berlian berputar berlawanan arah Mesin pembulat sudut untuk ujung tepi Pengaturan unit manual Ketebalan tepi 0,4-5,0 mm (opsional 8 mm) Tinggi benda kerja 8-60 mm Kecepatan maju 11 m/menit 3 slot kosong untuk unit finishing Pemasukan tepi untuk material gulungan dan potongan strip Pisau penarik

Kondisi: bekas, Tahun pembuatan: 2014, with jointing milling unit including DIA tools jointing thickness up to 40 mm workpiece thickness up to 3 mm combined milling station radius R 2.5 mm Technical description: with hot-melt adhesive application to the workpiece for edge material up to 3 mm 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit Maintenance-free, coated glue pot HF trimming station (16,000 rpm) for front and rear edge overhang HF milling station (16,000 rpm) with replaceable insert cutter (combined version) and fine adjustment of the cutter from the operator side Free slots for additional processing units (Hebrock system) Feed speed approx. 10 m/min Cutting depth adjustment of the trimming saw Signal lamp for workpiece sequence Robust chain drive Ergonomically arranged operator panel Double-roller upper pressure beam Aggregate viewing windows accessible from both the operator and rear machine side PLC control system with touchscreen included Technical data: - Feed speed: 10 m/min - Panel thickness from 8 – 40 mm - Weight: depending on equipment approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm airtronic for machines up to 8 mm edge thickness – 1 pc Technical data: Edge thickness possible: 1.2 mm – 3.0 mm Maximum panel thickness: 25 mm Feed speed: 7 – 10 m/min depending on edge material Ready for operation: 3 min Air consumption: approx. 800 l/min for the complete machine Power max.: 32A / 16 kW for the complete machine; higher power supply necessary for machines with groove saw Extraction as before PLC control is mandatory Upgrade to 8 mm edge thickness 1 pc up to max. 40 mm workpiece thickness Including pneumatic saw adjustment Separate pneumatic cutter adjustment 1 pc, controllable from the operator panel (straight/radius) Buffing station (buffing wheel) 1 pc Corner rounding cutter 1 pc incl. combination tool and pneumatic adjustment, chamfer/radius Max. workpiece thickness 40 mm Min. workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 pc incl. pneumatic lift-off device radius R 2.0 mm Giedjyfp N Depfx Ah Rjp Flat scraper 1 pc with pneumatic engagement control Glue pot change system in preparation 1 pc without second glue pot – includes possibility to process PU glue with the machine – without glue discharge device downwards Special PU glue discharge cleaning system downwards 1 pc 60 mm panel thickness for machine with jointing 1 pc – max. workpiece thickness with jointing unit 60 mm – jointing thickness at 40 to 60 mm – workpiece thickness up to 2 mm Special infeed fence for overlaid panels 1 pc, 16 mm and 19 mm thickness Max. overlay of edging 8 mm Separate extraction for jointing unit 1 pc, directly at jointing unit, vertically upwards, d=80mm, for optimal extraction performance from AKV 3005 DK-F onwards strongly recommended Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Nesting for the combination milling unit 1 pc For processing workpieces with cup hinge drillings Only possible on the underside of the workpiece Nesting for the radius scraper unit 1 pc For processing workpieces with cup hinge drillings Only possible on the underside of the workpiece Release agent spray device 1 pc Cleaning agent spray device 1 pc for easier removal of adhesive residue Antistatic spray device 1 pc Mandatory for airtronic Antistatic coolant is sprayed on the inner sides of the edge overhang before the combination milling station Location: Supplier