Mesin gergaji format

scm Si5

Kondisi: baru, Equipment: - 5-axis electronic control Laedpfxecrnm Nj Aklsg - Swiveling operator console above table - Electronic scoring unit adjustment - Automatic rip fence with screw-driven adjustment and linear ball bearing guide - On/off switch integrated into crosscut carriage - “Quick Lock” edging frame - Longitudinal fence with “Full Support” LCD displays - Sliding carriage with arched contact surfaces – 10-year warranty! - Telescopic arm with linear ball bearing guide Technical data: - Main saw blade diameter: 550 mm - Scoring blade diameter: 120 mm - Format cutting capacity with extendable fence: 3200 x 3200 mm - Swivel range: 0° to +46° - Max. cutting height at 90°: 200 mm - Max. cutting height at +45°: 130 mm - Saw blade rotation speed: 2500, 3500, 5000 rpm - Scoring blade rotation speed: 8500 rpm - Extraction port diameter: 120 & 100 mm - Main motor power (50 Hz): 7.0 kW - Scoring unit power (50 Hz): 1.3 kW - Cutting width with rip fence: 1500 mm Including the following OPTIONS: 570335 “Pro-Lock” system for quick clamping of the main saw blade and tool-free riving knife quick adjustment

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm Ledpjrigxysfx Aklsag 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Lasdpfedqzcxsx Akleg

Kondisi: baru, Technical specifications: Maximum saw blade diameter: 400 mm Minimum saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit with separate motor Manual height adjustment of the saw blade Tiltable saw blade from 0° to 45° Manual saw blade tilt adjustment Carriage length: 3200 mm Carriage lock Working table: 1450 mm x 1030 mm Table height: 920 mm Lodpfx Asv S Uz Iskleag Table extensions: 2 pcs Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Holz Her Auriga 1308 XL FÜ + PU Desain kompak – ketebalan tepi 0,4 – 8 mm Kontrol layar sentuh Edge-Control PPC 231 SPS Penyesuaian tinggi jembatan bermotor dan terkontrol posisi Unit pra-penghalusan untuk persiapan sebelum pengeleman Majalah tepi otomatis penuh untuk material roll dan strip Stasiun aplikasi lem GLU JET Cartridge + pengeleman PU Aplikasi lem dengan teknologi nozzle Tinggi benda kerja 6–60 mm Penyesuaian tinggi lem otomatis Unit penekan 1912-3 pneumatis Laodpfx Akezib Nijlog Unit pemotong ujung 1918 pneumatis untuk material roll dan strip hingga ketebalan tepi 8 mm Dengan pengaturan pneumatik untuk kemiringan 0–10° pada gergaji pemotong ujung Unit milling 1827 MOT 4, face milling 8 mm, radius milling – bevel milling – bevel 15° dengan sumbu NC melalui panel kontrol Unit form-milling 1832 pneumatis untuk membulatkan sudut hingga ketebalan tepi 3 mm secara kontinu Unit scraper 1929 MOT2 untuk bevel dan radius dengan 2 pemegang scraper, sumbu NC melalui panel kontrol Unit scraper permukaan – finishing Unit buffing – polishing Perangkat semprotan di area masuk dan keluar Perlengkapan alat lengkap terinklusi Pengiriman pertama 2013 Mesin telah diuji fungsinya dan dalam kondisi TOP Tersedia dari stok di Lieboch

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Ledovwbp Aepfx Aklsag

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022,

Kondisi: sangat baik (bekas), Planer Thicknesser, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle adjustment, dimensions 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutter block speed: 5000 rpm 4-knife cutter block, diameter 120 mm Max. depth of cut: 8 mm Dust extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table lifting and lowering with foot pedal Numerical depth of cut indicator Noise reduction combs on the cutter block Star-delta start Emergency stop button CE-compliant Includes all documentation Knife setting gauge NEW V-belts NEW cutter block bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight: approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location and include loading! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machines at the location. Laodpfx Akey Emf Rslog • Special agreements are only valid in written form. (We will only answer enquiries including your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Laodpfxei Dfids Aklsg Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2024, de-en-2024-new-machine-bandsaw-description-technical-specificati on Lasdew Nablepfx Aklog