Konveyor sabuk

SCM Sweeper

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Iaedpfsx D H Hcsx Aa Dsw Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Tahun pembuatan: 2026, Kondisi: baru, VKM - Package Singulation for Milled Timber With the singulation of milled timbers, whether loosely stacked or bundled, already milled timber can be processed further in a cost-effective manner. In a two-stage process, the timber is singulated for subsequent processing. It is also possible to automatically feed the singulated timber into a continuous process. Ijdsg Rxhgspfx Aa Dsaw The feeder is mechanically designed to reliably process even warped timber. Furthermore, it can be adjusted to the diameter of the timber to ensure that only a single piece is transported at a time, preventing blockages or downtime further along the processing line.

Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 116387, tinggi penyerutan: 160 mm, lebar perataan: 260 mm, lebar total: 145 mm, tinggi total: 170 mm, panjang total: 375 mm, berat benda kerja (maks.): 2.100 kg, tinggi benda kerja (maks.): 160 mm, sambungan udara terkompresi: 8 batang, jenis arus masuk: tiga fasa, lebar benda kerja (maks.): 260 mm, tegangan masuk: 400 V, panjang meja: 2.500 mm, jumlah spindel: 4, diameter sambungan ekstraksi: 250 mm, daya: 18 kW (24,47 hp), frekuensi input: 50 Hz, arus masuk: 63 A, Perlengkapan: rem mesin, cube4-2024 Iajdpfxexhcizs Aa Djw

Kondisi: bekas,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, MARKON log house drilling machine with undercutter Year: 1990 Manufacturer: MARKON Lathi / Finland Dimensions Length: 3550 mm Width: 1500 mm Height: 2910 mm Motor output Drilling unit: 6 x 3 kW Planing machine: 1 x 5.5 kW Workpiece dimensions Max. height: 250 mm Min. height: 130 mm Max. width: 250 mm Min. width: 60 mm Min. length: 600 mm Tool sizes and speeds Max. drilling diameter: 40 mm Max. planing machine diameter: 250 mm Drilling depth: 325 mm Drill spindle diameter: 20 h7 mm Drill speed: 2880 rpm Planer speed: 2880 rpm Extraction Extraction port Ø 160 mm 2 extraction ports Extraction port diameter on drilling unit: 90 mm 6 extraction ports Iaedpfofw Rt Rox Aa Dsw Air velocity at extraction port: 30 m/s Air consumption: 8,460 m³/h Electrical connection Total power: 380 V, 24 kW Compressed air connection Minimum pressure: 6 bar Air consumption/drill stroke: 48 l, total air demand ~ 2,200 l/min Including 3.5-meter roller conveyor + 12 drill holes

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Panjang: 10.400 mm / buah Panjang roll: 1.000 mm Diameter roll: 90 mm Jarak antar roll: 120 mm Iodpfx Ajdbacvsa Dsaw Berat kira-kira: 1.800 kg Stok: sekitar 40 m !! Berbagai ukuran.

Kondisi: baru, Eine einfache Baureihe von Scherhubgeräten zur Befestigung an einem Kranhubwerk für das Heben von Wandpaneelen mit kundenseitigem Kran. Tragfähigkeit 1 Tonne. Minimale Paneelhöhe 2000 mm, maximale Paneelhöhe 3500 mm. Bedienung durch eine Person. Eigengewicht des Geräts 80 kg. Iaedpefqmtkefx Aa Djw

Kondisi: bekas, Tahun pembuatan: 1996, rex-homs-630-technical-offer Iasdpfx Aajwng Ikj Dew

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Iaedswgwmnopfx Aa Dow Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...