Mesin pengemasan bantalan busa

Sealed Air Instapak 901

Kondisi: baru, Tahun pembuatan: 2025, The XTON Smart Cleaner SC1000™ Automatic Basket Cleaning System is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in a variety of industries and in the automotive sector. The cleaning unit is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is maximised by our proprietary XPOWER Active Cleaner BA fluid, which, combined with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed circuit at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-litre tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, as well as safe and convenient operation. The cleaning system is engineered for the automatic removal of contamination from surfaces made of cast iron, aluminium, and steel. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with 100 cm diameter - Heated tank with 300-litre capacity - Dual liquid filtration system - Level and temperature sensors - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-litre starter pack) Gedpfx Aou R Urhsaboua TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Basket load capacity: 300 kg - Adjustable working time: 0 - 99 min - Wash/liquid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Degree of protection: IP 54 - Declaration of conformity: CE

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3.000 kg, Berat Rotor Maksimum --- 3000 kg (6613,87 lb) Berat Rotor Minimum --- 30 kg (66,14 lb) Diameter Rotor Maksimum --- 1400 mm (55,12 in) Diameter Poros Minimum --- 20 mm (0,79 in) Diameter Poros Maksimum --- 300 mm (11,81 in) Daya Motor --- 11 kW (14,75 HP) Gusdpfor Dd Avsx Aaboa Unit Penggerak (Standar) --- 11 kW (14,75 HP) Kecepatan Penyeimbangan --- 0-3000 Rpm (25 Hz) (dapat disesuaikan naik turun) Unit Penggerak --- Sabuk saja atau Poros / Sabuk + Poros Panjang Ranjang --- 3000 mm (118,11 in)

Kondisi: bekas, jarak tempuh: 173.900 km, pendaftaran pertama: 11/2000, berat keseluruhan: 12.500 kg, jenis bahan bakar: diesel, warna: oranye, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, Tahun pembuatan: 2000, Perlengkapan: ABS, kompresor, kopling trailer, pendingin udara, penggerak semua roda,

Tahun pembuatan: 1991, Kondisi: hampir baru (bekas), berat keseluruhan: 1.420 kg, kecepatan rotasi (maks.): 1.485 rpm, 3 pcs stainless steel volute casing pumps in process design 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! The pumps were operated on a test bench and all have very low operating hours! See pictures! Flow rate: 1001 m³/h (278 liters/second) Delivery head / pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with flush water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearing Lubrication: oil Lubricant monitoring: oil level controller Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Cover plate: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: gray cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Degree of motor protection: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Godpfx Aeqabiajabjua Weight: 1420 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Wir bieten hier einen hochwertigen 3D-Scanner von GOM an: GOM ATOS IIe Rev.01. Das Gerät ist komplett anschlussfertig und wird mit sämtlichen Kabeln geliefert. Auf dem PC ist leider ein Passwort gesetzt, jedoch liegt die Software auf CD bei. Zum Lieferumfang gehören verschiedene Sensorköpfe mit den folgenden Messvolumina: - Satz 175x140 - Satz 350x280 - Satz 550x - Satz 1000x800 Im Lieferumfang enthalten ist außerdem ein kompletter PC von GOM im Aluminiumkoffer mit vorinstallierter Linux-Software – ebenfalls anschlussfertig für den GOM ATOS IIe. Die Software ist auf CD enthalten. Ebenfalls dabei: Steel Scalebars und ATOS Auswertdongle. Gsdpfew E I Itex Aabjua Zubehör: - Ersatzlampe - Kalibrierpanel (Aluminium), Typ CP20/MV, 350x280 mm²

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4012M-4212, rentang pengukuran sumbu X: 900 mm, rentang pengukuran sumbu Y: 1.000 mm, rentang pengukuran sumbu Z: 600 mm, berat benda kerja (maks.): 1.200 kg, Perlengkapan: Pelat tipe tersedia, Data teknis: Tipe mesin: Mitutoyo STRATO 9106 FAL-A910 Tahun pembuatan: 2001 Area pengukuran: 900 x 1000 x 600 mm Perangkat lunak: Mitutoyo Software v2.4.R11 Aksesori: Gusdpfxoqz T H Ae Aabja Penjepit probe: Renishaw SP80 Probe: Renishaw SP80 Aksesori tambahan: bola kalibrasi keramik, berbagai bola probe dan ekstensi, rak pergantian Renishaw, set pemasangan dengan 4 x SCP80 dan dudukan probe Perubahan dan kesalahan dalam data teknis serta informasi, serta penjualan antara waktu dapat terjadi!

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after prior configuration. In addition, the software can read variable data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral arms for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 Gusdpou Smd Esfx Aabea • Wavelength: 1064nm • Marking field size: 150x150mm (optional larger) • EZCAD marking software in German/English • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measurement system • Optional: Autofocus system – automatic determination of focus distance • Optional: Extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower to indicate machine status • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard shelf • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door pass-through height: 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: bekas, jarak tempuh: 227.566 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 05/2012, jenis bahan bakar: diesel, berat kosong: 6.390 kg, berat muatan maksimum: 6.110 kg, berat keseluruhan: 12.500 kg, konfigurasi gandar: 4x4, jarak roda: 3.050 mm, bahan bakar: diesel, kabin pengemudi: lain, tipe perpindahan gigi: lain, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 2, panjang total: 5.100 mm, panjang ruang muatan: 2.650 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 4.000 mm, Tahun pembuatan: 2012, jam operasional: 16.641 h, tinggi konstruksi: 3.360 mm, Perlengkapan: hidrolik, komputer bawaan, kopling trailer, pendingin udara, penggerak semua roda,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, For sale is a Keyence measuring system, model XM-C1000. Godpfx Aaerq Ebisboua This measuring system is unique because the measuring points can be manually guided. Very user-friendly and intuitive system. Compact and low-maintenance. The XM-1600 controller and PC are included in the offer. Also included: - Measuring probe - Exchangeable probe - Alignment station - Various clamping devices - Clamping vise - Mouse - Keyboard - Operating manual Transport and loading can be organized Europe-wide upon request and at an additional cost. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, daya: 210 kW (285,52 hp), pendaftaran pertama: 11/2007, jenis bahan bakar: diesel, konfigurasi gandar: 4x4, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: semi-otomatis, jumlah gigi: 8, kelas emisi: Euro 4, Tahun pembuatan: 2007, Perlengkapan: ABS, filter jelaga, kemudi berkuasa, komputer bawaan, kopling trailer, pendingin udara, pengaturan jendela elektrik,