Unit spindel penggilingan, misalnya untuk poros engkol

SEMA SE 100

Kondisi: bekas, Tahun pembuatan: 2005, 1 used, very well-preserved crankshaft milling unit for installation, e.g. on a lathe, for machining crankshafts and other milling operations Manufacturer: SEMA, Made in Austria Model: SE 100 Year of manufacture: 2005 Technical Data: Spindle taper: ISO 50, concentricity / test arbor L=300 mm = 0.01 mm Speed range, infinitely variable: currently set to 2,000 rpm Spindle rated for up to 3,000 rpm Drive power: currently 15 kW Milling spindle rated for up to 25 kW Bearing diameter: 110 mm The 2 adapter plates bolted underneath the milling spindle are currently fastened. These plates can be used on your lathe, modified, or may need to be newly fabricated, depending on your requirements. Mounting surface of the milling spindle (L x W): 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the cross slide of your lathe • Infinitely variable speed adjustment, frequency inverter by LENZE, rated up to 30 kW • Forward / reverse operation • Permanently lubricated spindle bearings • Rigid construction with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via threaded spindle • Mobile trolley with control panel • Emergency stop • Lockable main switch Driver gearbox for the main spindle: Lrodpfx Aeddziyogijw • A long drive shaft is mounted in the spindle bore and connected to the gearbox • Infinitely variable speed adjustment, frequency inverter by LENZE • Forward / reverse operation • Jog mode: fast / slow The pictures show this unit installed on a Universal Lathe SARO SPA 10 x 3000 for crankshaft milling. This lathe is not included in the scope of delivery! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: sangat baik (bekas), Perlengkapan: Pelat tipe tersedia, Mobile fuel tank systems for A1-A3 (KC diesel, KA petrol/diesel, as well as collection tanks), - Double-walled construction - Capacities from 250 to 1,000 litres - Partly with IBC approval - 12V / 24V / or 230V pumps available as needed - Automatic filling nozzle - Vertical or horizontal design - Some units with lockable pump covers - Optional flow meter with daily and total counter - All units supplied with new DEKRA inspection Loading and transport can be organised. Ledpfogx E N Isx Agisrw Only serious and legitimate enquiries will be answered. Please provide: Name, e-mail address, and phone number.

Kondisi: baru, Welding Positioner Table 50 kg Model: KT-50 without chuck Lrsdebambrepfx Agiow Maximum load (horizontal): 50 kg Maximum load (vertical): 25 kg Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60 Hz Price does not include quick-action chuck and height-adjustable workbench. Surcharge for quick-action chuck: €195 Packaging and shipping within Germany: approx. €80

Kondisi: baru, Tahun pembuatan: 2023, The B-Series is suitable for bending your reinforcing steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (double bending): BS36, BS45, BS50, BS60 (MG65 PRO) Lrsdpfx Aom Shffsgisw Product information: - Voltage: 380 V (16 A) - Motor power: 2.2 kW - 6 kW - Ideal for construction companies or on-site applications - Left and right bending possible (on BS models) - In addition to single-bend operations, bending sequences can be programmed - Inserts for different rebar diameters included in the accessories (including accessories) - Usable in automatic or manual mode - Bending capacities depend on steel strength as per table (see images) - Optionally available with digital control panel - Net weight: 215 kg - 850 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, we will be glad to assist you!

Kondisi: diremajakan ulang (bekas), Used steel storage tank according to DIN 6616/2 (with inspection certificate), double-walled, for above-ground storage, equipped with saddle supports, one access dome, optical leak detection device, overfill prevention device, and complete tank fittings including: - 3" filling pipe with TW closure - 1" dip tube with dipstick - Euroflex 3 suction combination (max. 150 l/h) - 2" vent nozzle with vent cap The tank is factory-fitted with the above-mentioned fittings and cleaned internally. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be supplied with new paintwork in your desired RAL color and optionally equipped with a ladder including an operating platform. Lredpfx Aohvmitsgijw Cost-effective delivery by our own truck is possible. Simply let us know the delivery location and you will promptly receive the exact freight costs. Should you require further information, please do not hesitate to call us or send us an email. Trade-in and purchase of tanks/containers is possible; please feel free to contact us about this. Delivery time upon agreement! We always have such tanks available in the following sizes as standard: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Kondisi: baik (bekas), Universal milling head, milling arbor, milling extension, angle milling head - Manufacturer: Waldrich - Spare part: from a milling machine - Milling head: swiveling - Quill stroke: 150 mm - Spindle taper: SK50 Ledpfxjfxlf Aj Agierw - Motor: 11 kW, 1470 rpm - Spindle speed: 25 – 560 rpm - Transport dimensions: 1550 x 600 x H460 mm - Weight: 636 kg

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 5319, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 2.600 mm, jarak gerak sumbu Z: 1.300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK-TYPE HEAD – TECHNICAL CORE DATA Travel distances: Lodpfxjwdub Dj Agijrw X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with a 1,000 mm guideway width. Two electric motors drive a centrally mounted rack and pinion. Hardened compact rolling guides ensure high precision. Machine column (Y-axis): Welded steel construction with a 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamics and accuracy. Protected by telescopic steel covers. Slide and headstock: Made of GGG-60 cast iron, guided by compact rolling guides. Optimum power transmission through long guides and close arrangement of Y and Z axes. Dual spindle drive: Two vertical ball screw spindles with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Digital single drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, contactless linear measuring systems for high manufacturing accuracy. Automatic 2-axis fork-type head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine–cabinet: 5 m. Control cabinet cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in the milling head. Power connection: Compressed air 4–6 bar, connection G ¼, with filter pressure regulator and condensate separator. Control system: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers and buttons for axes, feed, and spindle. Remote maintenance: Error diagnosis via alarm manager, notifications by email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Massive composite structure for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X-travel, statically verified. Coolant system: 500 l tank, filtration system

Kondisi: baru, Pressing force: 600 | Bending length: 6,050 mm | Distance between columns: 5,100 mm | Installation height: 680 mm | Stroke length (max.): 455 mm | Throat depth: 450 mm | Dimensions (LxWxH): 7,100 x 3,275 x 3,910 mm | Approx. weight: 50,200 kg | 4 axes (Y1, Y2, X, R): Yes, all axes operated via Esa S630 (2D graphical control) | CNC crowning via control: Yes, using the Esa S630 (2D graphical control) | Motor power: 45 kW Standard Equipment: KK Kletzer Europa We have assembled a high-quality model for the European market. The KK-Industries CNC press brake is made in Turkey. Model KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and wide range of applications. Lodpfx Asd Ehh Regiorw The Europa XL features a very large installation height, resulting in a significant stroke (ram travel). The throat depth is also exceptionally generous to minimize operational constraints. We emphasize quality, which is also reflected in the controller. The standard controller is the high-end Esa S640 (2D graphical control). Additionally, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all controlled via the controller. Naturally, CNC crowning control via Esa S640 (2D graphical control) is included. We also make no compromises with the upper tool and die, equipping the KKI EUROPA XL CNC press brake with premium tooling from EUROSTAMP Italy. Of course, every machine is only as good as its service. That is why we focus on highly qualified staff with extensive experience in CNC sheet metal processing. - CNC Axes Y1, Y2, X, and R - Esa S640 (2D Graphical Controller) - Backgauge with double linear guide and ball screw spindle - Motorized crowning device with CNC control - Heavy-duty design, height adjustment via handwheel; heavy-duty linear guide version from 175 t upwards - Laser safety device on the upper beam - CE-compliant safety equipment - Various options available Optional Controllers: - ESA 640 2D 15" Touchscreen Controller €4,520 - ESA 675 W 3D 21" Touchscreen Controller (Windows-based) €6,485 - DELEM 66 T 2D 17" Touchscreen Controller (Windows-based) €10,165 - DELEM 69 T 3D 17" Touchscreen Controller (Windows-based) €16,350 KK-Industries GmbH There is something for everyone!

Tahun pembuatan: 1979, Kondisi: bekas, Outreach: 22/29 mm Drive motor: approx. 0.55 kW at 380 V Lrjdpezif Ssfx Agisw Required space: 450 x 500 x 560 mm Weight: approx. 6.5 kg Pressing force: 30 kN

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: GM 3941/02, There are a total of 3 x Grob BZ500 available (Please state your offer price) Sales only within Europe, incl. Turkey Price excludes packaging; Delivery condition: FCA (machine location) Lsdpjmk Utrjfx Agiorw ===== For technical specifications, please refer to the handout. Any warranty rights are excluded. We do not assume any liability for the correctness of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guarantee or warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.