Beli Unit Spindel Penggilingan, Misalnya Untuk Poros Engkol bekas (60.236)

Kondisi: bekas, Tahun pembuatan: 2006, SEMA SE 100 milling spindle unit, e.g. for crankshaft production Spindle mounting: Flange Speed with this gearbox: 97 rpm Spindle rated up to: 3,000 rpm Drive power, currently: 22 kW Milling spindle rated up to: 25 kW Bearing diameter: 110 mm Disc milling cutter SANDVIK Ø 700 x 25 mm Maximum cutting depth of disc milling cutter: 235 mm Accessories / Special Features: - SANDVIK disc milling cutter Ø 700 x 25 mm - Lifetime-lubricated spindle bearings - Robust design with hardened and ground spindle - High precision - Spindle mounted with 2 rows and 5 spindle bearings - Tool clamping via flange Original price at the time: approx. €34,500.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Cgjdpfx Aeddzi Aoi Hju

Kondisi: bekas, Tahun pembuatan: 2005, 1 used, very well-preserved crankshaft milling unit for installation, e.g. on a lathe, for machining crankshafts and other milling operations Manufacturer: SEMA, Made in Austria Model: SE 100 Year of manufacture: 2005 Technical Data: Spindle taper: ISO 50, concentricity / test arbor L=300 mm = 0.01 mm Speed range, infinitely variable: currently set to 2,000 rpm Spindle rated for up to 3,000 rpm Drive power: currently 15 kW Milling spindle rated for up to 25 kW Bearing diameter: 110 mm The 2 adapter plates bolted underneath the milling spindle are currently fastened. These plates can be used on your lathe, modified, or may need to be newly fabricated, depending on your requirements. Mounting surface of the milling spindle (L x W): 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the cross slide of your lathe • Infinitely variable speed adjustment, frequency inverter by LENZE, rated up to 30 kW • Forward / reverse operation • Permanently lubricated spindle bearings • Rigid construction with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via threaded spindle • Mobile trolley with control panel • Emergency stop • Lockable main switch Driver gearbox for the main spindle: • A long drive shaft is mounted in the spindle bore and connected to the gearbox • Infinitely variable speed adjustment, frequency inverter by LENZE • Forward / reverse operation • Jog mode: fast / slow Cgsdpfx Aeddziyoi Heu The pictures show this unit installed on a Universal Lathe SARO SPA 10 x 3000 for crankshaft milling. This lathe is not included in the scope of delivery! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: sangat baik (bekas), Reversing clamp Manufacturer: Rückle Model: PKTW 2 Dimensions: 5 x 1 x 1.5 meters Forkardt power chuck, type FNC 315-65 Codpfx Ajin Ef Rji Hsgu Bore diameter: 65 mm External diameter: 315 mm Further equipment: Profile rail guide RUE 45 4 centering and clamping units Integrated chip deflector

Kondisi: baik (bekas), Tahun pembuatan: 2016, Single-Shaft Shredder CARBOMA Device designed for final shredding of plastics, mixed municipal waste, electrical cables, electronics, rubber, glass, ceramics, paper, cardboard, wood, etc. Manufacturer: CARBOMA (currently ICT S.A. Wyry) Csdpswny Rfsfx Ai Hsgu Model: PURSAN RK 2000 Year of manufacture: 2016 Max. power: 160 kW Total weight: 15,000 kg Rotor diameter: 600 mm Rotor length: 2,000 mm Shaft rotation speed: 80–200 rpm Number of knives: 156 pcs Screen thickness: 12 mm Screen hole diameter: 30 mm Throughput: up to 12 tons (depending on processed material) Technical condition: used, fully operational

Kondisi: bekas, Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor - Mounted on dovetail guide, cross table - With guide for trimming veneer edges - Power: 0.15 kW, 11,160 rpm at 200 Hz Csdpfjb A Ta Njx Ai Hsgu - Voltage: 133 Volt - Tool holder: - Tool: Ø 150 mm - Dimensions: 880/260/H300 mm - Weight: 18.5 kg

Kondisi: bekas, Double-end profiler, edge processing machine, scribing motor, cutting motor, milling motor, spindle motor Cgsdpob A Sy Hofx Ai Heu - on dovetail guide, cross table - with guide for trimming veneer edges - Power: 0.15 kW, 11,160 rpm at 200 Hz - Power: 0.22 kW, 17,250 rpm at 300 Hz - Voltage: 133/200 Volts - Mount: - Tool: Ø 150 mm - Dimensions: 560/220/H240 mm - Weight: 16 kg

Kondisi: bekas, Double-end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor - 1x motor: 1/1.5 kW, 2670/5710 rpm at 50/100 Hz - 1x motor: 5.5 / 8 kW, 2870 / 5880 rpm at 50/100 Hz Cgsdpfx Aijb Uhrze Hsu - Motor: mounted on guides - Motors: swiveling - Cutter: with indexable inserts - Dimensions: 900/1100/H1000 mm - Weight: 274 kg

Tahun pembuatan: 1994, Kondisi: bekas, Double-end tenoner, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor Csdeu Rv Rxepfx Ai Hegu - Manufacturer: Paul OTT, milling units from edge banding machine U 206 - Milling motors: Type HF 08.2 - Power: 0.6 kW / 200 Hz - Speed: 1,200 rpm - Adjustment ranges: see photos - Quantity: 2 milling units available - Price: per unit - Dimensions: 530/490/H600 mm - Weight: 67 kg/unit

Tahun pembuatan: 1994, Kondisi: baik (bekas), Double-end tenoner, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW Cgjdpfxju Scpqe Ai Hsu -Speed: 12,155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor - 2x Motor: 0.4 kW, 20 mm shaft, 11,300 rpm at 200 Hz - Motor: mounted on guides - Motors: swiveling Csdob A Im Ropfx Ai Hegu - Cutters: with indexable inserts - 3x Consoles: each equipped with 2 motors - Price: per unit - Weight: 60 kg per unit

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor - 1x motor: 0.15 kW, 11,160 rpm at 200 Hz - Saw: max. Ø 150 mm Cgedpfx Aeb A Nypji Heu - Motor: mounted on guides - Travel: 320/100 mm - Dimensions: 550/250/H330 mm - Weight: 17 kg

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Description Spindle box and tailstock adjustable manually. Ideally suited for machining a crankshaft type with different strokes. Workpiece Center distance of the outer main bearings, max.: 920 mm Crank arm length, max. (½ stroke + counterweight radius): 195 – 270 mm Max. number of machinable bearings: 8 main bearings, 6 crankpin bearings Main bearing diameter, min / max.: 30 / 88 mm Crankpin bearing diameter, min / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing distance, min.: 29.5 mm Roller burnishing devices Max. roller burnishing force: 30,000 N Spindle box Main drive motor power: 20 kW Speed for roller burnishing: 120 rpm / 60 rpm Speed for straightening: 30 rpm Machine Weight including ancillary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H) approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm Cgsdpfjwm Elfox Ai Hou

Kondisi: bekas, Tahun pembuatan: 2002, nomor mesin/kendaraan: 02010, BERMAQ C.T.C. single-spindle copy-milling machine – CE marked – used Csdeua Aztepfx Ai Hjgu - Boring unit - Spindle moulder (toupie) - Serial no. 02010 - Year 2002

Kondisi: bekas, Tahun pembuatan: 2005, Distance between centers 3050 mm Cjdpfx Aowz Rg Doi Hogu Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Max. workpiece weight 1000 kg Grinding wheel: Outside diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Peripheral speed of grinding wheel 6-50 RPM Accessories: - Measuring system - Tailstock - Coolant system - Documentation

Kondisi: baik (bekas), Tahun pembuatan: 2011, LANDIS LT-2 ZWEI-SCHEIBEN CNC-ORBITALKURBELWELLENSCHLEIFMASCHINE Ausstattung: - Landis 6400 CNC-Steuerung - Siemens TOUCH HMI - Arobetech Lünetteneinrichtung - Marposs P7 Messeinrichtung - Seitlicher Positionsgeber - Zwei CBN-Schleifscheiben - Rotierender Abrichter - Spindelstock - Reitstock - Rittal Klimaanlagen Technische Daten: Cedortrxxopfx Ai Hsgu Maximaler Spitzenabstand: 680 mm

Kondisi: baru, jenis bahan bakar: listrik, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2700x4500, Perlengkapan: kebisingan rendah, Main Technical Parameters of the Ball Mill - Drum diameter: 2400 mm - Drum length: 4500 mm - Motor power: 320 kW - Maximum feed size: 25 mm - Throughput: 35-60 t/h - Weight: 72 tonnes - Ball charge: 30 tonnes In addition to this model, we also offer other variants such as 2700x4500, 3200x4500, 1830x13000 mm, etc. We also provide customised solutions and tailor-made grinding systems for a wide range of industries, including cement production, quartz grinding, ore beneficiation plants and more. Please feel free to contact us for more information. A ball mill is a widely-used grinding machine designed for the comminution and blending of materials, most commonly in mineral processing operations like ore mining and the production of silica (silicon dioxide). Selection of an appropriate ball mill for ore mining and silica processing depends predominantly on the ore’s properties and the technical requirements of the end product. Key considerations for ball mill application in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The mineral hardness dictates the required robustness and wear protection of the ball mill. Harder ore bodies demand higher abrasion resistance. - Input Particle Size Distribution: Initial grain size influences the entire grinding process and the strategies needed to achieve the required output size. 2. Silica Grinding: - Silica Content: For silica grinding, it is critical to consider both feedstock purity and target particle size. Silica is highly abrasive; thus, equipment wear must be factored in during mill selection. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The mill discharge type (overflow or grate) affects both particle size control and grinding efficiency. Overflow mills are standard for most applications, while grate discharge mills are optimal for specific ores. 4. Mill Dimensions and Capacity: - Drum Size: Selection of drum diameter and length should be based on anticipated feed rate and required production capacity. - Throughput: Confirm that the chosen model is suitable for the expected volume and process requirements. Cgedjq Igiiepfx Ai Hsu 5. Grinding Media: - Composition and Size: The choice of grinding media (steel balls, cylpebs) depends on ore hardness and required product fineness. Media selection can also influence final product quality—especially in silica grinding. 6. Liners and Lifting Devices: - Liners: Choose wear-resistant, application-specific liners to extend mill life and improve grinding performance. - Lifting Aids: Integrated lifters may be utilised to boost grinding efficiency and ensure optimum material mixing. 7. Process Control and Monitoring: - Automation: Employ modern control systems for automated, consistent, and safe milling operations. - Monitoring: Routine monitoring and adjustment of operating parameters are essential for stable and efficient operation. 8. Safety Protocols: - Safety Systems: Incorporate all necessary safety mechanisms to protect operators and equipment. Always adhere to the manufacturer's operational and maintenance guidelines to maximise safety, performance, and longevity in mineral and silica grinding applications.

Kondisi: bekas, Tahun pembuatan: 1994, Motor 6 / 7,5 kW dengan unit pemasukan 4 rol, kecepatan pemasukan tetap. Penambahan kecepatan. Tinggi meja kerja: 920 mm. Kemiringan spindle: -10° hingga +45°. Proyeksi maksimum spindle di atas meja: 175 mm. Kecepatan spindle: 3250/6500-5000/10000 rpm. Diameter alat maksimum: 250 mm. Berat: sekitar 950 kg. Lokasi penyimpanan: Nattheim. Cgjdpfxew Enw Ie Ai Heu

Kondisi: bekas, 3626ä Cgjdewyay Dopfx Ai Heu

Kondisi: sangat baik (bekas), Catalogue number 7805 TECHNICAL DATA - Track width: 340 mm - Shaft width: 340 mm - Disc bore diameter: 80 mm Cgjdpfx Aiozadatj Hju - Discs mounted on upper shaft: 350 mm - Discs mounted on lower shaft: 300 mm - Maximum cutting height: 200 mm - Minimum workpiece length: 700 mm – Upper section - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Shaft with saw blades - 3 smooth pressure rollers – Lower section - Track - Shaft with saw blades - Track - Infinitely variable feed speed - Main motors: 2x approx. 55 kW - Feed motor: 3 kW - Electric lifting/lowering of body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2x200 mm - Dimensions (L/W/H): 2700x1800x2150 mm - Weight: approx. 5000 kg ADVANTAGES – German manufacture – Double-shaft – 2x55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Kondisi: hampir baru (bekas), R-D1618 Cgsdpfow Hfd Ijx Ai Hou

Kondisi: bekas, Tahun pembuatan: 2022, Additionally, freight €4,000.00 and installation and commissioning €5,000.00 Sanding Machine B Sand 5 with Partial Rotator Mode of Operation: The panel is placed on the infeed table. It is conveyed into the partial rotator and centered. The panel is sanded in the sanding machine, once in forward and return direction. The panel is then rotated in the partial rotator. The second side of the panel is sanded in the sanding machine. Afterwards, there are two options: either the panel is moved onto the outfeed table and unloaded, or it returns to the infeed table and is unloaded there (the second option increases the processing time). Sanding Machine Equipment: - 1 upper sanding flap roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs to perfectly cut longitudinal and transverse wood fibers. Each with 1.5 kW; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate panel sanding. - All tools are controlled via frequency converters. - All brushes are equipped with quick-change sanding strips without the need to replace the hub. - The discs are fitted with air nozzles to optimize cleaning and cycle time. - Sanding discs feature a Velcro attachment system. - Feed rate and revolutions are controlled by PLC to prevent edge damage to parts. - High-quality sanding on 4 sides thanks to the machine’s consistent material removal. - Automatic and quick changeover of sanding units. - Constant pass-through height; PLC and industrial software allow integration into a finishing line. - Infinitely variable speed for discs, brushes, and feed, based on frequency converter full equipment. - Right/left rotation of discs and brushes with different abrasives. - Individually driven adjustment for discs, rollers, and belts. Cgodpfx Aijvvkipe Hou - Additional setting for brushes and discs to optimize abrasive usage and adjust sanding pressure on surfaces. - Robust frame made from steel tubing guarantees excellent rigidity, stability, and flatness. - Planed top bed ensures optimal parallelism of the working surface for the sanding discs. - All sanding unit carriages utilize linear recirculating ball guides for high load capacity and precision. - Motorized feed belt controlled by frequency converter, 0.55 kW. - Machine doors are equipped with safety interlocks. - Machine doors with viewing windows allow observation of workpieces during processing. - Under the sanding units, there are Ø 80 mm rubber-coated pressure rollers to secure workpieces during operation. - Low operating costs thanks to individual replacement of the flaps. - Low operating noise due to the closed machine housing. - All units have extraction housings with corresponding extraction connectors. Cover plate with extraction socket. - Fully enclosed machine housing for a clean working environment.

Kondisi: bekas, Tahun pembuatan: 2022, Mesin pengamplasan silinder osilasi, spesifikasi teknis: Varian sekrup yang memungkinkan pengencangan pada selongsong spindle. Digunakan alat yang mirip dengan perangkat ProLoc. Lokasi: Nattheim. Cgodpfx Aijwhqprs Hju

Kondisi: bekas, Tahun pembuatan: 2022, Mesin pengamplasan silinder osilasi, spesifikasi teknis: Varian sekrup yang memungkinkan pengencangan pada selongsong spindle. Digunakan alat yang mirip dengan perangkat ProLoc. Lokasi: Nattheim. Csdpfx Ajwhqplsi Hjgu

Kondisi: bekas, Tahun pembuatan: 2018, Aliran volum nominal: 5087 m³/jam Vakum (Pa): 2300 Motor: 7,5 kW Dimensi: 1080 x 820 x 860 mm Berat: 154 kg Lokasi gudang: Nattheim Cgodpsvxk Anofx Ai Hsu

Tahun pembuatan: 1980, Kondisi: bekas, The Sledum RG-270 is a high-precision, industrial-grade crankshaft grinding machine designed for precision grinding of crankshafts and similar rotating component journals in internal combustion engines. The machine is built on a robust cast iron bed, offering high stability and vibration damping. Its design enables the consistent and highly accurate machining of large crankshafts. Main technical specifications: • Center distance: 2000 mm • Maximum swing diameter: 270–275 mm • Workpiece types: crankshafts, shafts, eccentric rotary parts • Grinding spindle with high-rigidity bearings • Cross and longitudinal slide system with fine feed adjustment • Machine bed equipped with precision guideways • Adjustable steady rest system for stable support of long workpieces • High-performance grinding motor for industrial continuous operation • Manually operated feed and positioning system • Rigid, vibration-damped industrial frame • Provision for coolant system • Heavy-duty industrial construction, designed for long service life Accessories and equipment: • Complete headstock and tailstock system • Grinding spindle unit with wheel mounting • Adjustable steady rests (support stands) for long shafts • Workpiece clamping system • Precision alignment and centering elements • Grinding wheel clamping flanges • Workpiece rotation device Cgjdpfezbiblox Ai Hou • Manually operated control panel • Complete slide system with fine feed • Coolant connection points • Machine frame and industrial bed • Adjustable workpiece support units