Mesin penggulung benang hyd Seny D44 EH

SENY D 44 EH

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Duodpfxsw D Aq Ts Ahujr Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 4.500 h, Saya menawarkan untuk dijual 5 unit blower Kaeser HB 950 dengan motor 110 kW dan 132 kW. Dsdpov Rmkxofx Ahusur

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Shaft diameter: 69.95 mm Dedpfx Ahst Apugeusur See video The machine is located in our warehouse in Gussago (BS), powered up. Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, pemrosesan penopang Dedov Iamzspfx Ahujur

Kondisi: baik (bekas), Tahun pembuatan: 2001,

Kondisi: hampir baru (bekas), Manesty D3B Tablettenpresse Dedjiy Nnyepfx Ahusur Seriennummer: 24D117 Manesty Tablettenpresse mit 16 Stationen, bis zu 500 Tabletten pro Minute, maximale Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Dedjhzbipspfx Ahusur Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fanuc Robodrill α-D21SiA5 Machining Centre TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Manufacturer Number: A04B-0102-B114#BDH Dujdpjxflq Asfx Ahujr Year of Manufacture: 2013 Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): - Fanuc Robodrill α-D21SiA5 Machining Centre - 4th Axis Rotary Table - Coolant Pump and Chip Tray - Precise scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currentness of the particulars.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, en-GB-1 Dusdpfxoxabnye Ahuor

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 180 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [deg] BUSH HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Travel X/Y: 50/325 [mm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Power-on hours: 31,902 [h] - Spindle hours: 12,146 [h] Dujdpfx Ahouha Slsuer EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Part catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3