Robot penanganan perangkat

SEPRO SR ACCESS 22 S3 DB

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Pressing force: 40 t Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable Ppodpfxsb U Hw Tj Abxjp

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Podpfx Abeg Ey Ufjxopp Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Tahun pembuatan: 2012, Kondisi: baik (bekas), Robot 40 RC 200 X = 700mm, Y = tandem 1600mm, Z = 3320mm, B + C servo axes Year of manufacture: 2012 Pedpfxjgkvtxj Abxepp Price: €8,900 Contact: Mr. Rainer Eckerle

Kondisi: baik (bekas), Tahun pembuatan: 2010, Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars (vertical): 570 mm Ppsdswpkfcepfx Abxsp Distance between tie bars (horizontal): 570 mm Shot volume: 154 cm³ Type: Horizontal Drive: Hybrid

Kondisi: belum diuji (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 1999, handlinggeraet-sepro-3021-bz-s-900-ii-x-550-mm-y-vert-1000mm-z-2 250-mm-c-a-r1-r2 Ppsdod H S U Djpfx Abxsp

Tahun pembuatan: 1988, Kondisi: baik (bekas), Press force: 160 tons Lateral passages: 600 mm Installation height: 750 mm Table: 1400 x 900 mm Ram: 1400 x 900 mm Speeds: Rapid traverse downwards 400 mm/sec Rapid traverse upwards 300 mm/sec Working speed 19 - 50 mm/sec Stroke: 400 mm Power requirement: 45 kW Weight: 23 tons Height: 4300 mm Ppsdpsd Rlm Rsfx Abxep The press is installed at floor level Press control: Siemens S5 3 spring cushions in the table, insertable

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. pump pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Process media connection: Flange DN40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control unit: Smart Controller (7" touchscreen display) - Heating control via solid-state relays Psdpjg Ey T Eofx Abxopp - Control cabinet IP54, forced ventilation - Expansion tank, heater, and piping in stainless steel - Heating with Incolloy stainless steel tubular heaters - Strainer (circulation) - Unit ready for connection, mounted on castors (2 steerable and braked) - Cooling and filling controlled by solenoid valve - Configurable automatic filling via cold water intake or separate connection (factory-set via cooling water inlet) - Flow measurement via differential pressure principle - Level monitoring with magnetic float switch - Automatic temperature-dependent system lock (not on WP7-90) - Flow monitoring by flow detection - Bypass between supply and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized mixing valve (WP7-180/200) - System pressure monitoring via pressure transmitter in the expansion tank (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional otherwise) - Safety temperature limiter (STB) in heater and supply line (WP7-200) - Manometer in supply line at the rear of the unit - Circulation circuit insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are fulfilled only if specified in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements differing from the standard will be specified in quotations or order confirmations.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Inv.119140, panjang total: 26.000 mm, lebar total: 9.000 mm, Perlengkapan: kabin, pencahayaan, 1 used painting line, including circulating conveyor belt, manual spray booth for sample processing, automatic spray booth with robot and workpiece rotary holder, reverse osmosis system for DI-water, paint preparation station, and exhaust air treatment unit. The plant is operated in two-shift serial production. Manual loading and unloading onto the conveyor belt; otherwise fully automatic operation. 18.7.25: Update: Dismantling from September 2025 at the Lohr plant to be carried out by the buyer. Buyer bears all costs for dismantling, packaging, collection, and transport to their own facility (FCA). The facility area must be cleared by mid-January 2026 at the latest to allow for installation of new production machinery. For further information, please refer to the attached handout/flyer. Due to the high effort involved in dismantling, early and thorough planning with the dismantling contractor is required, as well as prompt contact or a site visit to the plant. More information can be found in the attached handout. ----- Please submit your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Ppsdpfxewqg Iis Abxep Dismantling should be carried out by the buyer. No packaging provided. Any warranty rights are excluded. If you wish to carry out the dismantling yourself, please state this in your offer. We do not guarantee the accuracy of technical data, the completeness of accessories or tools, or compliance with occupational safety and environmental protection requirements set forth in accident prevention regulations.

Tahun pembuatan: 2013, Kondisi: baik (bekas), Robot Engel Viper 20 RC 200 X = 700 mm, Y = tandem 1500 mm, Z = 2840 mm, B + C axes servo-driven Year of manufacture: 2013 Price: €7,500 Contact: Mr. Rainer Eckerle Podpfx Abehqmpxsxspp