Gearbox / motor roda gigi / motor listrik

SEW-EURODRIVE R130DT180M-1

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), Two Vecoplan drag chain conveyors are available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, maximum incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, maximum incline: 70°, section length: 22 m. Documentation available. An on-site inspection is possible. Hnjdpjt Iw Ryjfx Agqsk

Kondisi: bekas, Total tinggi 6500 mm, luas dasar 2000 x 2000 mm, instalasi luar ruangan. Seri filter kompak model PKFP – 1 elemen – 1,92 x 1,92. Filter jenis rattle, pengoperasian tekanan lebih. Panjang selang filter 2500 mm, diameter 180 mm – sehingga total luas penyaring 105 m2. 2 kipas udara mentah – 2 pipa (diameter 300 mm): 1 x kipas KT 300, daya 15 kW, kapasitas 6361 m³/jam, tahun 1999; 1 x kipas S 25/300, daya 7,5 kW, kapasitas 7400 m³/jam, tahun 1993; 1 x kipas transportasi, 6,1 kW, kapasitas 57 m³/menit, tahun 1996. Total volume aliran sekitar 14.000 m³/jam. Mesin press briket Höcker Polytechnik tipe BrikStar C 3 - 12 . 1225, motor 3,0 kW, diameter briket 65 mm bulat, kapasitas kira-kira 40–45 kg/jam tergantung berat jenis material. Lokasi penyimpanan: Nattheim. Hnodpsvviytefx Agqok

Kondisi: bekas, Length: 1800 mm Hnodocxxu Dopfx Agqsk Width: 1200 mm Machine weight approx.: 1.6 t Required space approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 92 880 13, complete plant: with feed hopper, discharge chute, feed conveyor belt, impact crusher MFL-VORTEX, discharge chute under the crusher Hnodpfxolhrufo Agqjk

Tahun pembuatan: 2024, Kondisi: baru, ‼️SPECIAL OFFER‼️IN STOCK NOW IN HEILBRONN! Only while supplies last! ‼️IMMEDIATELY AVAILABLE‼️IN STOCK‼️ Powerful, robust machine at an attractive price from Josan & Söhne Small Alligator Shear: ➡️3 kW motor ➡️7 to 8 strokes per minute ➡️Dimensions: 1100 x 980 x 800 mm ➡️Weight: approx. 275 kg ➡️Jaw opening: 15 cm ➡️Blades can be reversed once they become dull, allowing for extended usage ➡️Health and Safety Regulations (UVV) implemented by a German company Hodpfxjp E Ehqo Agqenk Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 Large Alligator Shear: ➡️7.5 kW motor ➡️Jaw opening: 30 cm ➡️7 to 8 strokes per minute ➡️Dimensions: 249 x 109 x 174 cm ➡️Weight: approx. 1,500 kg ➡️Blades can be reversed once they become dull, allowing for extended usage ➡️630 kN force ➡️Hydraulic pressure: 21 MPa ➡️Health and Safety Regulations (UVV) implemented by a German company PRICE ON REQUEST Images/Equipment may vary. Subject to errors and changes.

Kondisi: baru, Tahun pembuatan: 2026, en-001 Hnedjxk Tg Njpfx Agqjk

Kondisi: sangat baik (bekas), The plant essentially consists of: - 2 feed units (walking floor bunkers) - 2 silos, each with 55 cbm capacity, equipped with discharge screws - 2 screw conveyors Hnodpelxzl Eofx Agqok - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-connected twin-shaft extruders for the disintegration of woody biomass - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Hnedpfx Agofy T H Ieqok Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Permanent Overband Magnetic Separator TYPE DMPM800 1,400 x 900 x 220 mm ===== Robust welded steel construction Welded and painted in RAL 7016 (anthracite grey) Magnet dimensions: 800 x 500 x 180 mm Drive pulley + return pulley made of S235 steel, welded and machined Ø220 x 700 mm crowned and precision-turned, shaft fixed with tension bearings. Drive: GEMOTEG flange-mounted gear motor, 1.1 kW, speed 0.4-0.6 m/sec Connection: 400V, 50Hz, protection class IP54 Drive pre-wired to motor terminal box Hnjdpfx Agshun Uioqjk (Commissioning must be carried out by qualified electricians) PU conveyor belt DM 20/2 0+010 PU black matt, 5.4 mm thick Belt width: 650 mm 7 pcs TG-40 cleats, high-frequency welded Belt material: 3-ply, particularly cross-rigid * Fitted with stainless steel Alligator fasteners RS125 Magnet properties: Integrated magnet core: Strontium Ferrite Y30 Bonded rigid strontium ferrite magnet core embedded in soft iron, ensuring exceptionally high permeability. Housing tightly sealed and encapsulated with 1.4301 stainless steel plate and pole shoes. Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core expertise lies in delivering exactly what our customers truly need. We work in close collaboration with our clients to develop customised, application-specific solutions and manufacture corresponding systems in-house. Please feel free to contact us by phone to find the right solution for your application.

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. Hodpsfz Anpjfx Agqonk VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.