Las Meja

SIEGMUND Workstation Set 22

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Redpfofzktzsx Ahwsp Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: bekas, CNC flame cutting system BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Track gauge: 3345 mm Track height: 650 mm Rjdsf Ncadjpfx Ahwjp 2x machine cutting torches with burn table

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: UP 20_LIND, Used Motoman HP20 Rjdpjfd Drrefx Ahwjp Type: HP 20 Controller: NX100 Year of manufacture: 2004.09 Payload capacity: 20 kg

Kondisi: bekas, Contact grinding wheel dimensions: 50 x 100 Ø mm Drive motor: 380 V, 0.7 kW Required space: 650 x 550 x 1050 mm Redpfxeb Tcv Hs Ahwsp

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm Rjdpfelgvkiex Ahwep - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: baru, en-GB: GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid bars, and all types of profiles. Materials: Hard or mild steel, non-ferrous metals, plastics. Process: After setting up the workpiece support and the lateral stops, the burred workpiece is simply held against the brush, which rotates around its own axis. The workpiece itself is not rotated – this motion is performed by the brush. The material of the workpiece, burr thickness, and desired edge rounding determine the contact pressure and duration, typically around 1-5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, steplessly adjustable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø 300 (250) x 50 mm or 3 pieces Ø 300 (250) x 35 mm Drive power: 3.0 kW Power consumption: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rodpfx Ahsd Hmnfowop Rated current: 8A Fuse: max. 16A Control voltage: 24V DC Width: approx. 500 mm + handwheel 74 mm + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max speed 82 dB(A) Scope of delivery: - Rotational head deburring brush machine GratMaxx with power socket (without cable) - Workpiece support table with adjustable angle stop and workpiece stops - Tool for brush replacement - Brushes not included in the scope of delivery! Accessories: F50201 Wire brush, twisted wire 0.38 mm F50202 Wire brush, steel wire 0.2 mm F50203 Wire brush, steel wire 0.38 mm F50204 Wire brush, stainless twisted wire 0.38 mm F50205 Abrasive nylon brush U180 F50206 Abrasive nylon brush U120 F50207 Wire brush, stainless wire 0.20 mm For further technical data, please refer to the attached PDF document.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Spindle bore: 52 mm Spindle power: 16 kW Rsdpfx Aswu Dq Ajhwsp Quill diameter: 60 mm Quill stroke: 140 mm Spindle taper: 4 MT Spindle speed: 3000 rpm Feed rate X-axis: 1000 mm/min Feed rate Z-axis: 2000 mm/min

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. Rsdpfx Ahjmxkdpjwsp MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Tahun pembuatan: 2025, Kondisi: baru, Manual length stop MD 50 h – Precise Measuring & Positioning with Handwheel and Digital Display The manual length stop MD 50 h with handwheel drive and digital measurement display is the ideal solution for frequently changing cut lengths and accurate positioning of long materials. Thanks to quick adjustment via the handwheel and precise digital distance measurement, you increase both efficiency and quality in your production. Technical specifications & advantages: ✔ Handwheel drive for the carriage – Precise & quick adjustment ✔ Digital actual value length display – Accurate positioning across the entire working area ✔ Direct travel measurement via sensor / magnetic tape – Maximum precision ✔ Pneumatic stop clamping with high holding force – Secure position fixation ✔ Carriage with 8 ball bearings – Durable & stable ✔ Measuring lengths from 1 m to 6 m (optionally up to 20 m) – Customizable ✔ Cable chain with steel trough – Robust construction for industrial applications ✔ Available in left- or right-hand design – Flexible for various machine layouts Rjdeidln Tspfx Ahwsp Can be retrofitted to existing machines & roller conveyors! Enquire now & secure your offer!

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: Rsdpenh R Ekofx Ahwjp • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility