Unit kontrol suhu
Single Easitemp 150/6/45 (Easi150.B)

Name: Single Easitemp 150/6/45 (Easi150.B)
Brand: Single
Availability: InStock

Kondisi

Baru

Lokasi

Hochdorf

Unit kontrol suhu Single Easitemp 150/6/45 (Easi150.B)

Data mesin

Nama mesin:: Unit kontrol suhu

Pabrikan:: Single

Model:: Easitemp 150/6/45 (Easi150.B)

Kondisi:: baru

Harga & Lokasi

penyewaan:: dimungkinkan

Lokasi:: Ostring 17, 73269 Hochdorf, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A4572749

Nomor referensi:: Easi150.B

Pembaruan:: terakhir pada 21.11.2024

Deskripsi

*Technical Standard Specification:
Device type: 6/150
Heating capacity: 6 kW
Cooling capacity: 45 kW
(Performance data at 80°C supply temperature and 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar)
Medium: Water up to 150°C
Maximum external volume: 9 liters at 150°C

*Functional Equipment:
- Cooling and filling controlled via solenoid valve
- Automatic filling via cooling water
- Level monitoring via magnetic float switch
- Dirt filter in the return line of the circulation and cooling water supply
- Reversal switch for leak stop operation (usable up to system shutoff temperature)
- Ball valve on supply and return
- Automatic temperature-dependent system shutoff
- Filling duration monitoring and Aquatimer
- Adjustable pump post-run
- Adjustable temperature alarm
- Options: Interface cable

- Control unit SBCmini, with relay for collective alarm, 230V, terminal mounted on rear of controller
- Heating control SSR
- Control panel IP54
- Interface 20mA TTY; Arburg pin assignment
- Cekon plug 16A

- Corrosion-resistant components (stainless steel, brass)
- Device mounted on castors, two of which are steerable with brake
- Additional temperature safety device for secure shutdown of the heater via upstream heating protection
- Bypass between supply and return with reduced cross-section

*Pump:
Type: Y2051
Maximum flow rate: 27 l/min
Maximum delivery pressure: 4.5 bar
Motor power: 0.5 kW
Design: submersible pump / peripheral impeller

Lajdpfjfnvwqjx Al Njd
*Dimensions/Weight/Colors
Dimensions L/W/H: 600 mm x 240 mm x 493 mm (excluding connectors)
Weight: approx. 43 kg
Color:
Housing: RAL 7035 light grey
Front door: RAL 5015 sky blue

*Connections:
Circulation medium: G1/2" female
Cooling water: G3/8" female

*This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in offers or order confirmations.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

4572749-01.pdf

Penyedia

Terdaftar sejak: 2020

8 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7153 ... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Cat dinding ekstraksi kabut Höcker Paint Star 3500

Nattheim

11.085 km

Cat dinding ekstraksi kabut
HöckerPaint Star 3500

Hubungi

Iklan kecil

Thermo minyak suhu kontrol unit Regoplas RT50

Dn10 4Es

11.700 km

Thermo minyak suhu kontrol unit
RegoplasRT50

Hubungi

Iklan kecil

Feucht

11.001 km

Mesin penggilingan
DECKELFP 1

Hubungi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, on the mechanics overhauled by us. The electrical and electronic components are excluded, as they were only tested for functionality. For machines located outside our North Bavarian sales region, travel expenses are to be borne by the customer. Geometric inspection with test protocol Accessories: Laodjmhfrrepfx Al Nod - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as seen Technically, the machine corresponds to the standard of its original year of construction.

Lihat detail

Iklan kecil

Unit Pendingin Suhu (TCU) Single Compact WK3-160-9-50 (IM160F)

Hochdorf

11.141 km

Unit Pendingin Suhu (TCU)
SingleCompact WK3-160-9-50 (IM160F)

Hubungi

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Ljdpfx Aeftm Hrsl Noad Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Lihat detail

Iklan kecil

Haiger

11.185 km

Pengeboran Lubang Smal EDM
WeipertSLB

€14.500

harga tetap ditambah PPN

Hubungi

Tahun pembuatan: 2020, Kondisi: seperti baru (mesin pameran), Diameter elektrode 0,5 hingga 3 mm Jarak tempuh 300x400x350 mm Sertifikasi CE membuktikan tingkat keamanan terbaik Seluruh rangkaian tersedia dalam konstruksi yang dipasang di atas permukaan Elektrode Ø 0,5-3 mm Jarak tempuh sumbu X 300 mm Jarak tempuh sumbu Y 400 mm Jarak tempuh sumbu Z 350 mm Jarak tempuh sumbu W 300 mm Kecepatan sumbu C 30-60 mm/menit Kecepatan gerakan cepat sumbu Z 120 mm/menit Rasio aspek 300:1 Dimensi meja 320x440 mm Lajdpfx Aof Hmn Aol Nsd Arus kerja maksimum 30 A

Lihat detail

Iklan kecil

Wien

10.646 km

TT-157E
TOOL - TEMP

Hubungi

Iklan kecil

Tangki diesel 100.000 liter / tangki minyak pemanas BARTH

Forst

11.196 km

Tangki diesel 100.000 liter / tangki minyak pemanas
BARTH

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, designed for underground storage of heating oil and diesel fuels, equipped with 1 manhole (optionally available with 2 manholes). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, our tanks can be equipped with the following accessories: - Leak monitoring with vacuum or pressure leak detector - Manhole chamber with accessible or drivable shaft cover - Partition walls (for multi-compartment tanks) - Internal coatings (e.g., two-component epoxy resin), partial or full linings - Content and level measurement systems as well as control and automation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel, or petrol - Dispensers for diesel, biodiesel, and petrol – upon request, including complete fuel management system - External tank insulation with PU foam The tank is internally cleaned and the external coating has been completely refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply provide your delivery location to receive an immediate quotation for the exact freight costs. If you require further information, please call us or send us an email. We also offer trade-in and purchase of tanks/containers – please contact us for details. Lasdpei Enxdjfx Al Nsd Delivery time by arrangement! We always keep the following tank sizes in stock: - 10,000 | 13,000 | 16,000 | 20,000 | 25,000 | 30,000 | 40,000 | 50,000 | 60,000 | 80,000 liters.

Lihat detail

Iklan kecil

Unit Pendingin Suhu (TCU) Single Variotherm ATT H2-200-48

Hochdorf

11.141 km

Unit Pendingin Suhu (TCU)
SingleVariotherm ATT H2-200-48

Hubungi

Kondisi: baru, *TECHNICAL SPECIFICATION: Lajdpfxog Ey Ufo Al Ned Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Lihat detail

Iklan kecil