Unit Pendingin Suhu (TCU)

Single Oil Advanced D2

Kondisi: bekas, Unit Pengatur Temperatur Universal Oli Tingkat Lanjut dengan Pemanas Listrik dan Sambungan untuk Pendingin Eksternal Unit Pengatur Temperatur Oli, Sistem Pengaturan Temperatur Proses Sirkulasi, Unit Pemanas, Unit Pendingin, Pemanas Listrik Tipe SINGLE Advanced Oil D2-300-18-116 Nomor Pabrik: 151777 Tahun Pembuatan 2015 Suhu maks. 300°C (dengan oli sebagai media transfer panas) Rentang Suhu +20°C hingga 300°C Tekanan Operasi Maks. 8 bar Kapasitas Pompa 100 l/menit Volume Tangki 22 liter (Volume Internal) Volume Eksternal maks. 86 liter Kapasitas Pemanas 18 kW Nodpfx Ae Aarfael Tjwn Kapasitas Pendingin Penukar Panas 116 kW Daya Motor Pompa 2,8 kW Media Transfer Panas Marlotherm SH Sirkuit Air Sirkulasi Aliran Masuk + Aliran Keluar DN25 - G 1" Aliran Masuk Air Pendingin G 1/2" Aliran Keluar Air Pendingin G 1/2" Daya Sambungan 23,5 kVA Pengendali SCT standar - Layar Sentuh 7" Sambungan Jaringan 400 Volt, 50 Hz, 32,7 Amp. - Media pengaturan temperatur hingga 300°C = oli sebagai media transfer panas (Marlotherm SH) - Pengaturan temperatur - Untuk pendinginan, diperlukan unit pendingin eksternal atau sirkuit pendingin eksternal (pendinginan dilakukan melalui penukar panas antara media pendingin dan oli sebagai media transfer panas) - Dapat dipindahkan dengan 4 roda - Pengiriman tanpa kabel sambungan Dimensi P x L x T 1125 x 395 x 1210 mm Berat 226 kg Kondisi bagus

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Njdpfx Aou Ttf Nel Tswn Heating capacity: 6.0 kW Net weight: 1150 kg Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Kondisi: baik (bekas), Tahun pembuatan: 2016, daya: 18 kW (24,47 hp), Single Advanced Oil D2-180-18-0 – Perangkat Pemanas Minyak Produsen: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Tahun Pembuatan: 2016 Daya Pemanas: 18 kW Daya Pemanas Spesifik: 23,2 kVA Nodjyrncijpfx Al Tjwn Arus Nominal: 32 A Tegangan Pasokan: 3×400 V / N / PE Frekuensi: 50 Hz Suhu Maksimum: 180 °C Tekanan Operasional Maks.: 3,1 bar Katup Pengaman: 6,0 bar Media: Minyak transfer panas Kapasitas pengisian eksternal maks.: 22 liter Berat bersih: 169 kg Dimensi unit: desain standar (sesuai tipe perangkat) Penggunaan: Pengaturan suhu untuk proses industri, alat, modul instalasi Lokasi: Schierling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 300 h, gaya penjepit: 400 kN, berat keseluruhan: 2.180 kg, produsen pengendali: ARBURG, model controller: SELOGICA direct, Mesin cetak injeksi hidrolik, tahun pembuatan 2019. Arburg ALLROUNDER 270 C 400-100 ini memiliki gaya penguncian 400 kN dan langkah pembukaan 350 mm. Mesin ini memiliki tekanan injeksi maksimum 2500 bar dan berat injeksi hingga 29 g. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, Anda dapat mempertimbangkan Arburg ALLROUNDER 270 C 400-100 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. - Pengendali: SELOGICA direct - Gaya penguncian: 400 kN - Gaya pembukaan: 130 kN - Langkah pembukaan: maks. 350 mm - Tinggi penjepitan cetakan (min.): 200 mm - Jarak pelat (maks.): 550 mm - Jarak antara kolom (L x W): 270 x 270 mm - Dimensi pelat cetakan (L x W): maks. 446 x 446 mm - Berat setengah cetakan yang bergerak: maks. 180 kg - Gaya pengeluaran / langkah: maks. 30 kN / 125 mm - Waktu siklus kering (EUROMAP): 1,2 – 189 s-mm - Ukuran unit injeksi: 100 - Diameter sekrup: 20 mm Nwodpfxszvm Azj Al Ten - Panjang sekrup efektif (L/D): 25 - Langkah sekrup: maks. 100 mm - Volume langkah yang dihitung: maks. 31 cm³ - Berat tembakan (PS): maks. 29 g - Laju alir material (PS / PA6.6): maks. 5,5 kg/jam / 2,8 kg/jam - Tekanan injeksi maks.: 2500 bar - Tekanan penahanan maks.: 2500 bar - Kecepatan injeksi maks.: 64 cm³/s - Torsi sekrup maks.: 120 Nm - Gaya penekanan nosel / langkah tarik: maks. 50 kN / 180 mm - Daya pemanas: 4,95 kW - Kapasitas corong: 1,8 l - Tegangan operasi: 400 V 3~ 50 Hz - Tegangan kontrol: 230 V ~ 50 Hz / 24 V DC - Arus nominal motor / pemanas: 42 A / 11 A - Total arus nominal: 53 A - Total daya yang terhubung: 29 kW - Daya motor pompa: 11 kW - Volume oli hidrolik: 165 l - Berat bersih mesin: 2.180 kg

Kondisi: baru, Tahun pembuatan: 2023, translation-001 Nodoxr Hgxopfx Al Tjwn

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), AMUT EA90/24 SINGLE-SCREW EXTRUDER Type: RALDI Screw for PVC, oil-cooled Application: PVC, PE, or PP Year of manufacture: 1999 Operating hours: 48,000 Drive: DC 36.3 kW 11 digital temperature controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Pull-off control possible via the extruder Nedpfxjk Nn Dzs Al Tjwn Condition: Good, ready for operation The extruder is my property Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Germany

Kondisi: diremajakan ulang (bekas), 60 m³ / 60,000 l Firefighting Water Tank according to DIN 14230 Tank Capacity: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel grade S 235 JRG 2 Underground tank for below-ground storage, available as single or double-walled, suitable for walkable and drive-over areas (load class SLW 30) with 1 dome (external diameter 720 mm) with blank cover, sealing, and bolts. Available immediately, both new and used! The tank has been emptied, cleaned, overhauled, and professionally leak-tested by us as a certified specialist company. The tank complies with the requirements of DIN 14230 (Underground firefighting water tank): - Firefighting water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319, version form B, without dip tube - Ventilation flange connection NWN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Exterior protected with bitumen coating - Upon request, we can equip the tank with a full internal coating based on bitumen or epoxy resin (for corrosion protection) Nodshh Sruepfx Al Town - It is also possible to line the tank with an internal plastic liner Cost-effective delivery with our own truck is possible. Just let us know the delivery location and we will promptly provide you with the exact shipping costs. Inspection is possible at any time by prior arrangement. If you require further information, simply call us or send an email to b.barth(at)barth-tank.de We also accept trade-ins and purchase tanks/containers of any type, just contact us regarding this. We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Tahun pembuatan: 2023, jam operasional: 11 h, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: MA0144_1922, Exhibition Model: Screw Compressor Kaeser SX 8 (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical Data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Nsdpfsh Ey Rcox Al Tewn Electrical connection: 400 V / 3 / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. On over 450 m² of exhibition space, you will find a large selection of used and new compressors.

Kondisi: baru, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Functional Equipment: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return flow of the circulation and cooling water inlet - Reversing unit for leak stop operation - Manual tool drainage via leak stop operation and actuation of a vent valve at the rear of the unit - Monitoring of filling time and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling spout, interface cable, mechanical flow meters *Electrical Functional Equipment: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, on terminal at rear of controller - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - CEE plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tube heating elements made from Incolloy - Device mounted on castors, two of which are steerable and with brakes - Additional temperature safety device for secure disconnection of the heater at the heating downstream circuit breaker *Cooling: Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Threaded socket G3/8" F (Capacity specified at 80°C supply and 15°C cooling water temperature, and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Flow rate (max.): 40 l/min Delivery pressure (max.): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller Nedpfx Alofnvvij Tewn *Dimensions / Weight / Colour: Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: Threaded socket G1/2" Cooling water: Threaded socket G3/8" Filling (option) *This device conforms to European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be listed in quotations and/or order confirmations.

Kondisi: baru, Tahun pembuatan: 2022, Working width: 630 mm Planing height: 300 mm Cutterblock: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter Feed speed: 7-11-15-19 m/min Infeed roller: segmented steel Nedpfxehpl T Ho Al Tewn Pressure bar: segmented Outfeed roller: rubber Table rollers: none Table extension: yes, infeed and outfeed Motor power: 7.5 kW Extraction port: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg