KONVEYOR ROL BERMOTOR DI TANAH

SIRIO

Kondisi: bekas, Tahun pembuatan: 2005, Overview These 8 isobaric pressure tanks (each with a capacity of 500 hl), manufactured in 2005 by Sirio Aliberti, originate from the wine industry and were previously used for sparkling wine production. With an operating pressure of up to 6 bar and full insulation, these tanks are ideally suited for the fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with a food-grade epoxy coating on the interior, combined with polyurethane insulation and an external stainless steel cladding. This design offers a traditional and cost-effective alternative to stainless steel tanks, which became the industry standard in later years. Thanks to their large volume and isobaric properties, these tanks are particularly well-suited for high-throughput production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of manufacture: 2005 Quantity: 8 units Type: Isobaric pressure vessel Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: - Base: Carbon steel - Internal coating: Food-grade epoxy resin - Insulation: Polyurethane - Outer cladding: Stainless steel sheet Operating pressure: 6 bar Dimensions (per tank): - Internal diameter: approx. 3,200 mm Fgodpfx Amey Hkkae Sec - External diameter: approx. 3,450 mm - Cylinder height: approx. 5,250 mm - Foot height: approx. 1,200 mm - Overall height: approx. 7,800 mm

Tahun pembuatan: 2025, Kondisi: baru, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200) beladen, entfällt das manuelle Vorbereiten jeder einzelnen Palette – das spart Zeit und reduziert die körperliche Belastung der Mitarbeitenden. Stattdessen gibt das Gerät Paletten auf Knopfdruck oder nach voreingestelltem Algorithmus auf ein motorisiertes Rollenband ab, das sie zur weiteren Verarbeitung weitertransportiert. Der PD-10 kann mit verschiedensten Palettierlösungen kombiniert werden. Fassungsvermögen: bis zu 10 Europaletten Beladung per Gabelstapler Reduziert körperliche Belastung Fjdpshbg Uxsfx Am Ssgc Steigert Effizienz

Kondisi: sangat baik (bekas), O04024) AUTOMATIC SHEET STORAGE SYSTEM for PANELS – SIRIO Total space requirement (incl. panel saw): approx. 10,000 mm x 47,000 mm Movable upper gantry (on the X-axis) with movable carriage (on the Y-axis) and associated vacuum suction unit (movable on the Z-axis) Max. speed of movable upper gantry (X-axis): approx. 150 m/min Carriage travel speed (Y-axis): approx. 150 m/min Vacuum suction unit travel speed (Z-axis): approx. 60 m/min Vacuum suction unit assembly, rotatable by 90° Automated management system (via scanner) for cut panels (even if they remain in storage) O04025) PANEL SAW with rear lift table, Model FH6 430 MCS Evolution control. SIEMENS WinAC RTX software No. 1 rear pusher Programmable split pusher – DUPLUS2. No. 12 clamps Max. cutting length (mm): 4300. Usable pusher stroke (mm): 4300. Max. saw blade projection (mm): 135 Scoring saw (max. blade diameter): 200 mm Main saw (max. blade diameter / power): 460 mm / 21 kW Fodewrz Dbepfx Am Ssgc Adjustable feed speed of the saw carriage (m/min): 1 – 150 No. 4 front air flotation tables Total connected load (kW): approx. 33

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° Fgsdpfx Aokt Uuasm Sjc M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet Fsdpfx Amox Af Rds Segc - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur.

Kondisi: sangat baik (bekas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Loader Fgjdpfohv Sttex Am Sec

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole, 100 - 200 mm Fjdpfx Amohua Dqe Segc Plate diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotational speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Tahun pembuatan: 2010, Kondisi: baik (bekas), 2250-mm pallet nailing line Semi-automatic nailing table Turner + (optional marker) Stacker (maximum 3000 mm) Transfer Fgodpfjpy H Erex Am Ssc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, Perlengkapan: kabin, Paint/Spray Booth !! Always a brand new machine (Customer installation photos shown). We are the manufacturer. !! The Reinox 450×235 paint booth represents the ideal solution for painting large components and serial production. Its robust construction, high-performance extraction, and ATEX certification ensure safe operation even in environments with explosion risk. The booth is equipped with a powerful fan with a frequency inverter, allowing smooth adjustment of extraction power according to current needs. A three-stage filtration system keeps the workspace clean and ensures high-quality surface finishing. Technical specifications: - Fan certified for ATEX Zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan: 4 kW (ATEX version) - Extraction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Regulation: frequency inverter – stepless power adjustment via potentiometer on the control panel - Filtration: three-stage (dry or wet variant upon request) - Certification: CE, ATEX Fgsdpfxsia Taxo Am Ssc Warranty: 12 months Machines can be ordered in various custom configurations and sizes! Do not hesitate to contact us.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), I am selling window sets suitable for CNC window manufacturing centers: LEUT wood-aluminum 110mm Bore 50mm. Fedsg Tumyjpfx Am Ssgc Everything complete. Very good condition. Available as a set. Possible to purchase separately as well.