Angkat gunting

SkyJack SJ4626 ELECTRIC, 10M WORKING HEIGHT, 454KG CAPACIT

Kondisi: baru, Ostas 3-Roll Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor: 4 kW Features: - Top and bottom rolls electrically driven - Swing-out top roll - Cone bending device Dcodsg Nz T Ispfx Ag Djg - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety cable, CE-marked

Kondisi: siap digunakan (bekas), Approx. 120 pieces = 480 linear meters of safety conductor rails Dsdpfx Aod Hurbeg Dscg Number of conductors/poles: 5 in standard lengths of: 4 m Busbar cross-section: 10 mm² For mains voltage up to: 500 V Continuous current rating (100% duty cycle): 60 A Weight per meter: 2.1 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, 1. WEISHAUPT WM-G10/4-A (dengan jalur gas) - Daya: 100-1100 kW - Tipe: ZM-LN - Tahun pembuatan: 2020 2. WEISHAUPT WM-G10/3-A (dengan jalur gas) - Daya: 100-1000 kW - Tipe: ZM - Tahun pembuatan: 2015 (1 unit), 2013 (tersedia 2 unit) 3. WEISHAUPT WM-G10/3-A (dengan jalur gas) - Daya: 125-900 kW - Tipe: ZM-LN - Tahun pembuatan: 2011 4. WEISHAUPT WM-G10/3-A (dengan jalur gas) - Daya: 100-1000 kW - Tipe: ZM - Tahun pembuatan: 2011 Dcodewgyrtjpfx Ag Dog 5. WEISHAUPT WM-G10/3-A (dengan jalur gas) - Daya: 100-1000 kW - Tipe: ZM - Tahun pembuatan: 2009

Kondisi: baik (bekas), Riello RL50 oil burner Output: approx. 15 kg/h Inspection by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. Dsdpopiqipofx Ag Djcg All information is provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We can of course handle all formalities for you. Loading possible.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, kapasitas angkut: 450 kg, tinggi angkat: 9.900 mm, berat kosong: 2.300 kg, jenis bahan bakar: listrik, kondisi ban: 70 persen, kondisi penggerak: 75 persen, berat muatan maksimum: 454 kg, SKYJACK SJ III 4632 scissor lift in excellent condition for sale. Personnel lift, work platform with extendable deck. Manufacturer: Skyjack Year of manufacture: 2011 Load capacity: 454 kg Working height: 11.7 m Platform height (raised): 9.7 m Overall width: 1.9 m Overall length: 2.3 m Gross weight: 2300 kg Non-marking tires Dedpfx Aougtlijg Decg Operating hours: 374 TROJAN MOTIVE batteries in good condition. Built-in battery charger.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1993, jenis kontrol: manual, tingkat otomatisasi: manual, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 280 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, diameter rol: 400 mm, panjang rol: 4.050 mm, lebar kerja: 4.000 mm, tinggi kerja: 1.100 mm, ketebalan lembaran (maks.): 8 mm, ketebalan pelat baja (maks.): 8 mm, ketebalan maksimum lembaran baja tahan karat: 6 mm, berat keseluruhan: 11.000 kg, panjang total: 6.000 mm, lebar total: 1.450 mm, tinggi total: 1.510 mm, daya: 11,03 kW (15,00 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, henti darurat, rol yang dikeraskan, Mesin pembengkok plat 3 rol 4000x8 mm dengan pre-pinch Model Famar CPI4/6 Dcedpfx Aoxnmb Isg Deg KAPASITAS Lebar plat: 4000 mm Tebal plat: 8 mm Pre-bending: 6 mm --- Lebar roller efektif: 4050 mm Diameter roll atas: 300 mm Diameter roll samping: 280 mm Permukaan tiga roll dikeraskan Pembacaan posisi roller pembengkok Bukaan depan dengan drop-end hidrolik untuk membongkar silinder tertutup Poros diperpanjang untuk pemasangan roller tambahan untuk pembengkokan profil Kecepatan pengerolan variabel hingga 5 mtr/menit Ditenagai motor listrik 15Hp pada unit hidrolik 15Hp - Tegangan 380/50 Instalasi keselamatan dengan tombol darurat Dimensi 6000x1450 x T 1510 Berat 11 Ton

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, sistem pelumasan terpusat, Mesin Roll DAVI Diameter rol: 180 mm Djdpfxey Emtno Ag Dscg Panjang pengerolan hingga 3 m Ketebalan hingga 15 mm

Kondisi: baik (bekas), jarak tempuh: 347.000 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 03/2004, jenis bahan bakar: diesel, konfigurasi gandar: 6x4, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, suspensi: udara, panjang ruang muatan: 6.300 mm, Tahun pembuatan: 2004, Perlengkapan: derek,

Tahun pembuatan: 2020, Kondisi: bekas, New: Yes Empty weight: 412 kg Dedpfxjx I Hfce Ag Decg Working width: 175 cm

Kondisi: sangat baik (bekas), en: Epson G10-854SR Robot Assembly Station / Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = Heat Sink, SW = Front Wall Bracket) Section 3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards enters the dispensing area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position. - The x-y-z handling system moves the dispensing head to the designated position and starts the dispensing process. - Once dispensing is successfully completed, the handling moves to the home position and the WT is placed back onto the conveyor belt. - The carrier is then conveyed into the assembly area KK+SW (condition: no WT in the pick & place position). Section 3.2: Assembly Area KK+SW - A WT moves from the dispensing area into the KK+SW assembly area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position; at this stage, the side walls of the partially assembled unit's chassis are aligned. - Simultaneously, KK-tray and SW-tray positioning occurs. - A stack of KK-trays (12) and a stack of SW-trays (12) are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety gates are opened and the loaded tray stacks move into the gripping position of each stacker. - The two safety gates are closed again. - The respective grippers pick up the appropriate tray. - Using the Z-axis, trays are separated and transported upwards (above their pick-up height). - For centering and tray stabilization, a centering support is positioned under each tray via x-handling. - The stacker Z-axis then places the respective tray onto the centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the KK is taken from the tray and placed in an intermediate position for alignment (to compensate for inaccuracies when picking up—maintained gripping position for assembly). - The KK is scanned, picked up again, and if the scanner’s result is OK, it is assembled onto the WT. - Defective (n.i.O.) KKs are placed in a defective component box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and assembled onto the WT. - The process continues with the assembly area front. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability Horizontal: +/- 0.025 mm Repeatability Vertical: J3: +/- 0.01 mm Repeatability Orientation: J4: +/- 0.005° Maximum Operating Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Moment of Inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User Cabling Electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cable: 3m Dcodpoibx S Njfx Ag Dog Financing via our bank is possible as well. complete-concept.leasingo.de