Mesin gerinda poros engkol

Sledum RG-270

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1980, Gleason Hypoid Cutter Sharpener 13A – 1 unit Milling diameter: 89–500 mm Grinding wheel dimensions: 305 x 19 x 102 mm Feed rate: 0.05–0.18 mm Grinding wheel drive motor – 1800 rpm (60 Hz) – 1500 rpm (50 Hz) Floor space: 1240 x 2310 mm Height: 1422 mm Itedpfx Ahsr Elpvs Aol Machine weight: 4,083 kg Gleason 19 Revacicle Cutter Inspection Machine – 1 unit

Kondisi: bekas, Tahun pembuatan: 1952, de-hu-001 Itedpeyt Rxvofx Ah Aol

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Itsdpfxeyidvde Ah Asl Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Tahun pembuatan: 2010, Drehdurchmesser über Bett 0316 mm Drehlänge 340 mm Itedpfx Ahoydqpis Ajl Steuerung ultimax Hurco Drehdurchmesser über Bettschlitten 240 mm Schwingdurchmesser 402,5 mm Spindeldrehzahlen - stufenlos 0- 6000 U/min- rpm Spindelbohrung 45 mm Vorschübe 0- 30 m/min Betriebsspannung 400 V Anschlußleistung 14 KW Planschlittenweg 185 mm Längsweg 340 mm Raumbedarf ca. 3,76 x 2,92 x 2,15 m Aufnahmedurchmesser VDI 20 mm Hauptantriebsmotor 11,5 kW Maschinengewicht ca. 3,2 t Mit 12- fach Revolver und Stangenlader.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, berat benda kerja (maks.): 2.500 kg, lebar total: 3.200 mm, panjang total: 15.800 mm, jarak antara pusat: 6.000 mm, diameter benda kerja antara pusat: 850 mm, berat keseluruhan: 19.000 kg, Kami menawarkan mesin gerinda silinder CNC Hol-Monta spol.sro UB 85 / 6000 yang sangat baik, tahun produksi 2014. Model: UB 85 / 6000 CNC Tipe kontrol: Kavalir K 51-2 Nomor seri: H 214 09 005 Diameter ayun: 850 mm Jarak antar senter: 6.000 mm Iedpfx Ahey Hgrgo Astl Perlengkapan gerinda internal Penopang tetap (steadyrests) dan lain-lain.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Iodpfxoyw H Szs Ah Aotl Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER Itjdpfx Ahov Ig Ave Aol - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.323.36002, 22621 Technical Specifications: - Maximum working length: 3500 mm - Frame gap/Distance between uprights: 3050 mm - Maximum pressing force: 2000 kN - Distance table/ram (max.): 480 mm - Throat depth: 260 mm - Ram stroke approx.: 300 mm - Stroke speeds: - Downward rapid traverse (max.): 100 mm/sec - Upward speed: 80 mm/sec - Pressing speed (downward, max.): 10 mm/sec Itedpfoip Niksx Ah Aol - Total drive power: 25 kW - Installation dimensions (approx.): W 4500 x H 3150 x D 2100 mm - Weight (approx.): 16,000 kg Includes: - CNC control (CYBELEC), renewed in 2008 - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment, 5 - 1000 mm - Hydraulic tool clamping - Top tool and universal die - Sheet supports - Two-hand control console

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, model controller: HEIDENHAIN TNC 530, berat benda kerja (maks.): 4.000 kg, berat keseluruhan: 35.000 kg, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 12.000 rpm, hidung spindel: SK 40 (DIN 69871), jumlah slot dalam magazin alat: 60, Pusat Pemesinan CNC DECKEL MAHO DMU 160 P KARAKTERISTIK TEKNIS: Tahun pembuatan: 2008 Kontrol CNC: HEIDENHAIN TNC 530 Jumlah sumbu simultan: 5 Langkah sumbu X: 1600 [mm] Langkah sumbu Y: 1250 [mm] Langkah sumbu Z: 1000 [mm] Kecepatan pemakanan sumbu X, Y, Z: 15000 [mm/menit] Kecepatan perpindahan sumbu X, Y, Z: 60000 [mm/menit] Dimensi meja: Ø1500 x 1250 [mm] Maks. beban di meja: 4000 [Kg] Tipe spindle: SK 40 (DIN 69871) Kecepatan spindle min.: 20 [rpm] Kecepatan spindle maks.: 12000 [rpm] Jumlah stasiun magazin changer alat: 60 Berat mesin: 35000 [Kg] PERLENGKAPAN TERMASUK: 1 × probe bagian HEIDENHAIN Isdpfjzggmbsx Ah Aotl 1 × sistem pengukuran laser untuk pengaturan alat dan pemantauan alat 3 × linear glass scale HEIDENHAIN pada sumbu X, Y, dan Z 1 × sistem pendingin melalui spindle 1 × konveyor serbuk 1 × unit filtrasi pita kertas (sistem filter kertas) Informasi lebih lanjut tersedia atas permintaan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 Itjdpfsy Tmhzjx Ah Ael X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm