Pers eksentrik kolom ganda

SMERAL LEN 63C

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Gaya deformasi terukur kN 630 Gsdpfx Aex Sqtlsdteil Langkah mm 10 - 105 Tinggi penutupan mm 335 Dalam tenggorokan mm 315 Bukaan mm 355 Penyesuaian slide mm 70 Jumlah langkah slide /menit 65/130 Luas slide mm 450 x 280 Luas meja mm 800 x 630 Tekanan MPa 0,5 Daya motor utama kW 5,0/7,5 Daya masuk total kVA 10,4 Dimensi mesin mm 1425 x 1790 x 2550 Berat mesin kg 5850

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Godpfx Aoxddvnodtjil Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 1986, Technical details: Pressure: 63 t Stroke rate: 65 / 130 strokes/min Throat depth: 315 mm Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table / ram: 335 mm Clearance between uprights: 355 mm Clamping plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Giodpfx Adeu N Dafjtel Compressed air: 9 bar Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Machine dimensions approx. LxWxH: 1.42 x 1.8 x 2.6 m Press equipped with tilting frame (25°) and combined inching and overload protection (overload shutdown). Available modes of operation: Single stroke via foot pedal (slow speed and inching) and/or manual control (slow speed) Continuous stroke via foot pedal (slow and fast speed) and/or manual control (slow and fast speed)

Kondisi: bekas, Tahun pembuatan: 1983, Pressing force 63 t Gijdpeumm S Dofx Adtel Outreach 315 mm Stroke 10 - 105 mm Stroke rate 71 - 140 strokes/min Ram adjustment 70 mm Table dimensions 800 x 620 mm Ram dimensions 450 x 280 mm Total power requirement kW Machine weight approx. 5,850 kg Space required approx. 1.425 x 1.79 x 2.55 m - Table clamping plate

Kondisi: bekas, Technical details: Maximum ram stroke: 250 mm Maximum workpiece diameter: 80 mm Maximum workpiece length: 900 mm Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Gjdpfxow Au I Ij Adteil Various accessories *

Kondisi: baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 63 t, Press LEN63C Godpfsu Nkfuox Adtsil

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 25.500 mm, lebar meja: 800 mm, panjang meja: 630 mm, penyesuaian langkah: 105 mm, lebar total: 14.250 mm, panjang total: 17.900 mm, berat keseluruhan: 5.850 kg, gaya penekanan: 63 t, jenis penyesuaian ketinggian: mekanis, daya: 7,5 kW (10,20 hp), Eccentric Press LEN 63C Year of manufacture: 1989 (SMERAL TRNAVA, Czech Republic) Technical specifications: - Pressing force: 63 tons - Number of strokes in automatic mode: 65/130 per min - Number of strokes in manual operation: 45/50 per min - Slider stroke adjustment: 10-105 mm - Slider stroke: 70 mm - Table surface: 800 x 630 mm - Slide surface: 450 x 280 mm - Throat depth: 315 mm - Clearance (table to slide): 335 mm - Clearance between uprights: 355 mm - Number of speeds: 2 Gedpfx Aetzxdzjdtsil - Motor speed: 730/1440 rpm - Motor power: 4/7.5 kW - Overall dimensions (LxWxH): 1425 x 1790 x 2550 mm - Weight: 5,850 kg Machine is in good technical condition. Inspection and testing under power possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en-001 Giedpfx Adswl U Rhetsl

Kondisi: bekas, various types available Godpfx Asdc A Sbodtsil

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), Table dimensions: 1435x460mm, Number/Width/Spacing: 5/16/80mm, Control system: TNCi-120, Length: 1435mm, Width: 2330mm, Height: 1648mm, Weight: 3.1t, with documentation, accessories available, no known defects, on-site inspection possible. Gedpfx Ajlbmupedteil