Mesin pelurus untuk poros dan pipa

SMS MEER

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), DE-SMS MEER CNC-DOPPELSEITIGE ANFASMASCHINE Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohr-Ø 21,3 – 114,3 mm Wandstärke: 2,3 - 11 mm Nsdpfx Aheghrguewjwc Länge: 6-12 m Bestehend aus zwei RFA14-Angleautomaten mit Fördereinrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Anfasen der Innen- und Außenseite beider Rohrenden. Der Durchmesserbereich der angefasten Rohre beträgt 21,3-114,3 mm bei einer Wandstärke von 2,3-11 mm und einer Länge von 6-12 m. Die Aufgabe des Transports im Bereich der Anfasmaschinen besteht darin, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu bewegen.

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Nedpfx Ajtzdyzshwswc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Profile dimensions: max. 150 x 50 mm Tube Ø: 50 – 150 mm Wall thickness: 1.5 – 5.5 mm Reference material (tensile strength): 600 N/mm² Coil Ø: max. 2,100 mm Coil weight: max. 10 t Finished tube length: max. 9,000 mm Round tube Ø: as per listing Profile tube dimensions: as per listing Speed: 100 m/min Working direction: left → right Line composition: 1. Entry section: - Double uncoiler - Coil opener/feeder/straightener - Crop shear - Strip end welding machine - Strip guide - Strip twister/feeder/entry strip accumulator - Strip accumulator - Edge trimming - Exit twister 2. Forming section: - Number of horizontal stands: 4 - Number of vertical stands: 3 3. Welding 4. Sizing (calibration) 5. Cut-off (length cutting) 6. Beveling 7. Blowing out 8. Bundling 9. Hydraulics 10. Electrical Nwjdpfxjuc Sw Aj Ahwec

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Nwodpfx Asv Ehbbehwec Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Feed chamber dimensions: 280x580 mm, loading height: 700 mm, max. load: 300 kg, equipped with safety enclosure and documentation. The machine was fully operational until recently, but a complete maintenance service is required. Inspection is possible. Nedpfjqgfbgsx Ahwowc

Kondisi: bekas, Tahun pembuatan: 1988, jam operasional: 1 h, nomor mesin/kendaraan: V 516, lebar total: 2.000 mm, panjang total: 7.000 mm, tinggi total: 1.800 mm, tekanan kerja: 300 batang, gaya penekanan: 90 t, tebal plat aluminium (maks.): 5 mm, daya: 11 kW (14,96 hp), berat kosong: 16.000 kg, gaya potong: 90 t, tahun perombakan terakhir: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Nwjdpfx Aelhqd Rehwsc Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30.01.2026

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Nwjdpfxohzbipo Ahwjc Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: MS 1153, Angbot 23158 Technical Data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel Nsdpollvr Defx Ahwswc - Space requirement for blasting system: 1600 x 2000 x H 1750 mm - Space requirement for blast media vessel: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan: MUNK - SCHMITZ - Airflow: 700 – 1500 m³/h - Extraction fan power: 3 kW - Space requirement for filtration unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Kondisi: baru, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm and made from various materials such as PE, PP, and PVC. These machines are capable of shredding plastic pipes up to 9 meters in length directly, without the need for pre-cutting or sawing. The centerpiece is a rotor with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and shreds material gently at low rotational speed. The pipe is loaded into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator processes the material into regrind directly suitable for further processing. The entire system is operated automatically via a central control unit. Additional benefits of the system include low energy consumption, avoidance of power peaks, and the minimization of accident risks during pre-shredding. Nsdpfx Ahjghgd Ijwewc

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1974, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1276, CNC Schmiederadialpresse GFM SX-13 Baujahr: 1974 / 2022 (modernisiert) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hammer: 4 Schmiedekraft pro Hammer: 160 Tonnen Hammerhübe/min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundmaterial: Ø 130 mm Vierkantquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6820 mm Manipulator B max. Verfahrweg: 7150 mm Maximale Werkstücklänge: 6000 mm Eilgang Manipulator: 400 mm/sec Gesamtanschlussleistung: 300 kW, 380 V, 50 Hz Nwodpfx Ahjq U R T Newec Abmessungen: Schmiedehöhe über Fußboden: 615 mm Gesamthöhe der Maschine über Fußboden: 1665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg