Sodick AG60L

Sodick AG60L

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 4.247 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T1284, berat benda kerja (maks.): 1.500 kg, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 420 mm, jarak gerak sumbu Z: 370 mm, tinggi total: 2.570 mm, panjang total: 1.852 mm, lebar total: 2.825 mm, tinggi benda kerja (maks.): 400 mm, lebar benda kerja (maks.): 750 mm, panjang benda kerja (maks.): 550 mm, jenis arus masuk: tiga fasa, lebar meja: 750 mm, berat keseluruhan: 5.350 kg, panjang meja: 550 mm, tinggi meja: 400 mm, berat kosong: 5.350 kg, beban meja: 1.500 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, The Sodick AG60L die-sinking EDM was manufactured in 2019. It features a ceramic table with dimensions of 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine is equipped with a linear motor, glass scale, and a remote control pendant, enhancing both precision and operating convenience. We encourage you to consider the purchase of the Sodick AG60L die-sinking EDM. Please contact us for more information on this machine. X-axis travel: 600 mm Y-axis travel: 420 mm Z-axis travel: 370 mm Replaceable paper filter / SEC-10 (C axis) / SGF2 Nano Wear Unit / Fire extinguisher / TMM3 Power Generator / Dielectric cooling unit / 15" TFT touch screen Redpfxjx Ekb Ns Alaot Linear motors (X, Y, Z axes) / Glass scales (X, Y, Z axes) / Ceramic work area / Remote control Machine dimensions (LxWxH): 1852 x 2825 x 2570 mm / Machine weight: 5350 kg Max. workpiece weight: 1500 kg / Ceramic table size (WxD): 750 x 550 mm Floor-to-table distance: 850 mm / Max. electrode weight: 50 kg Dielectric fluid level (min-max): 150 - 400 mm / Dielectric capacity: 465 l

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: fungsi terbatas, jam operasional: 43.100 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: Heidenhain iTNC530, model controller: 530, kecepatan pemakanan sumbu X: 60 m/menit, laju pemakanan gandar Y: 60 m/menit, laju pemakanan sumbu Z: 60 m/menit, pergerakan cepat sumbu Z: 61 m/menit, gerak cepat sumbu X: 61 m/menit, pergeseran cepat sumbu Y: 61 m/menit,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Turning and Milling Center – DMG GILDEMEISTER – CTX gamma 1250 TC Year of manufacture: 2009, used as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately ready for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B-axis. Basic machine data: * Partial hollow clamping device (hydraulic) * C-axis * Upper compound slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, taper: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct linear measuring systems on X, Y, and Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar capacity: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turning-milling spindle: * Tool taper: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine footprint approx. (W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight approx.: 18.5 t EQUIPMENT: Well equipped … * No steady rest Rsdpfxjw Hg Nlj Alaot * Complete documentation available No guarantee as to the completeness or accuracy of the technical data or equipment. Detailed technical specification sheet and equipment information available on request.

Kondisi: diremajakan ulang (bekas), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measuring uncertainty 4.0 + 4.5L/1000 (in original condition; currently significantly improved after modernization) Completely modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Entirely new Inca Premium software (alternative software available on request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc. Rsdpfodpak Rjx Alajt

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Misinvestment by a corporation. The machine is brand new and unused (already delivered). There are no lead times—immediately available. A truly rare opportunity. Machine type Horizontal Machining Center with Pallet Changer Series NHX 8000 Control Siemens S840Dsl with CELOS Rodpfxoxizdao Alaot Measuring System Fully Closed Scale Feedback (X/Y/Z) Machine Concept DCG Travel X/Y/Z 1,400 / 1,200 / 1,350 mm Rapid Traverse X/Y/Z 50,000 mm/min Pallet System Pallet Changer, Turn-Type Number of Pallets 2 Pallet Size 800 × 800 mm Pallet Load 2,200 kg [optional 3,000 kg] Max. Workpiece Ø/H 1,450 mm / 1,450 mm Pallet Change Time 16 s B-Axis Direct Drive Minimum Indexing 0.001° Max. Speed 100 rpm Spindle powerMASTER Speed 16,000 rpm Power 85/50 kW (10% DC / Continuous) Torque 549/279 Nm Mounting HSK-A100 Cooling Centralized Spindle Cooling Internal Cooling optional CTS 7 MPa Tool Magazine Chain Magazine with 60 Stations [optional 100/120] Rack Magazine Options 180 / 240 / 330 Stations Max. Tool Diameter with Adjacent 110 mm Max. Tool Diameter without Adjacent 320 mm [if >10,000 rpm: 230 mm] Max. Tool Length 800 mm Max. Tool Weight 30 kg Tool-to-Tool 1.9 s Cut-to-Cut 5.0 s Equipment / Options Workpiece Probe Tool Measurement System Laser Monitoring optional High-Pressure Coolant 7 MPa optional Chip Conveyor Full Enclosure with Roof Dimensions n.a. Weight n.a. Connection Data n.a.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 750 kg, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, berat kosong: 2.450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Maximum taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete unit: 2020 x 2050 x 2000 mm Total weight of the unit: 2,450 kg Rodpfswqdrrjx Alaot The machine will be cleaned, overhauled, and tested by us prior to delivery. We are also happy to offer you installation and commissioning of the machine.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, trans-001 Rsdpsxqn Ubefx Alaet

Kondisi: siap digunakan (bekas), Tersedia dua mesin yang identik, termasuk dokumentasi. Redjm Rg R Aopfx Alajt

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Rodpfeifn N Nox Alaet Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. Rsdpfx Aleylw Steajt • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic hand control module (iTNC) Technical Specification Taper Size: SK 40