Pusat permesinan kolom perjalanan CNC

Soraluce FL 6000

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 5.500 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 15 rpm, lebar meja: 1.200 mm, panjang meja: 6.000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2006 Capabilities / Travel ranges: Longitudinal (X): 5,500 mm Vertical (Y): 1,400 mm Transverse (Z): 1,000 mm Clamping table: Length: 6,000 mm Width: 1,200 mm Number of T-slots on the table surface: 12 pcs Width of T-slots: 22 mm Hedpfx Aoy Tkgbsfnou Distance between slots: 100 mm Max. workpiece weight: 13,500 kg NC rotary table: Position: Right side, flush-mounted into table surface Clamping surface: Ø 1,000 mm Positioning accuracy: 360 x 0.001° Max. workpiece weight: 3,500 kg Number of T-slots: 9 pcs Size of T-slots: 22 mm Distance between T-slots: 100 mm Paint finish: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle, 28 kW Spindle speed range: Spindle speed: 15 - 5,000 rpm Torque: 815 Nm Feed rates: X, Y, and Z axes: 2 – 10,000 mm/min Max. rapid traverse: X, Y, and Z axes: 25,000 mm/min Max. feed force: 10,000 N Base area FLC6000: approx. 11.0 x 5.6 m Overall height: approx. 3.5 m Weight: approx. 35,000 kg HEIDENHAIN iTNC 530 HSCI Automatic MTE diagonal milling head Automatic tool changer Chip conveyor Coolant system with 70 bar & (through spindle coolant) RepairFIT is our proven solution for a cost-effective entry into our product lines. The machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (deep-dive check) by us. After intensive cleaning, all identified defects and faults are professionally repaired by our qualified service team.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 2.450 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 12.001.400 mm, jarak gerak sumbu Z: 18.001.790 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 3.000 kg, tinggi total: 4.700 mm, panjang total: 12.700 mm, lebar total: 7.800 mm, diameter meja putar: 2.200 mm, kecepatan rotasi (maks.): 200 rpm, berat keseluruhan: 57.000 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 2.450 h, pasokan pendingin: 40 batang, jumlah slot dalam magazin alat: 60, panjang alat: 460 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 6000 Travel Y-axis mm: 1200/1400 Travel Z-axis mm: 1800 (H) / 1790 (V) C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: ±180° B-axis indexing degrees: ±180° Rapid traverse m/min: 30 Worktable Pallet dimensions mm: 6000 x 1235 NC milling/turning table: Pallet dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 Max. torque Nm: 4600 Spindle Max. spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/continuous) Hjdpfjzb H Tfsx Afnsu Spindle torque Nm: 382/278 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 With empty adjacent pockets mm: 200 With adjacent pockets occupied mm: 104 Max. tool length mm: 460 Max. tool weight kg: 25 Tool change time (chip-to-chip) sec: 9.8 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rinsing gun Operating mode 4 Blow air through spindle center selectable via M function Work area lighting DXF import function Paper band filter Automatic work area door Mounted indexing device for shaft machining Axes can be clamped hydraulically via M function (optional) Machine operating hours: Power-on hours: 29,447 Spindle operating hours: 2,450 Basic machine: Dimensions / Weight Length mm: 12,700 Width mm: 7,800 Height mm: 4,700 Weight kg: 57,000

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Hedpfx Afot Hwt Sjnju Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Hjdpfx Ajy Tmhzefnou Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Soraluce model FL8000, mesin frais CNC tipe lantai dengan kolom bergerak berkinerja tinggi. JANGKAUAN (X) 7.500 mm JANGKAUAN (Y) 1.400 mm JANGKAUAN (Z) 1.000 mm KECEPATAN GERAK CEPAT (X, Y, Z) 25.000 mm/menit RENTANG UMPAN KERJA (X, Y, Z) 1 – 10.000 mm/menit TINGKAT PERCEPATAN (Sekejap, bukan maksimum) 1 m/s2 KECEPATAN SPINDEL 20 - 4.000 Rpm TAPER SPINDEL ISO 50 DAYA SPINDEL 28 Kw NC15C - HEIDENHAIN iTNC 530 (Layar TFT datar 15,1" dengan penggerak digital). Versi satu prosesor. Dipersiapkan untuk mesin dengan 10 motor (9 sumbu CNC + motor spindel). Panel tombol utama dengan tombol yang dioperasikan secara individual untuk sumbu linier (X+, X-, Y+, Y-, Z+, Z-) Opsi K20 untuk i530M. AC independen. Servomotor penggerak digital Heidenhain untuk setiap sumbu. HEIDENHAIN HR-410, roda tangan elektronik portabel dengan kabel spiral 5 m. Kepala pengindeks otomatis 28Kw, 760Nm, 0,001° x 0,001°, 4000 Rpm. Sistem pelumasan terus-menerus dengan udara dan kabut oli untuk roda gigi kepala. Perangkat penjepit alat otomatis – 15.000N. Perangkat pelepasan alat hidrolik otomatis. Taper spindel: BT50 Motor spindel torsi tinggi 28kW, 100% ED, motor digital. R10 – Kotak roda gigi ZF dua kecepatan termasuk unit pendingin. Rentang kecepatan spindel 20 – 4.000 Rpm Kecepatan gerak cepat sumbu X-Y-Z 25.000 mm/menit Rentang umpan kerja sumbu X-Y-Z 0 - 10.000 mm/menit Hsdpfxsw U Tlze Afnsu Tingkat percepatan sumbu X-Y-Z 1 m/s2 (sekejap, bukan maksimum) Sistem penyeimbang hidrolik untuk rakitan kepala/ram. Sistem penggerak sumbu X dengan dua servomotor, dua kotak roda gigi, dan rak & pinion ganda. Sekrup bola yang dipralu dengan mur resirkulasi ganda pada sumbu Y dan Z. Sistem pelumasan terpusat otomatis. Sistem pemandu linier dengan rol silindris resirkulasi pada setiap sumbu. Sistem pelumasan terpusat otomatis untuk pemandu. Skala pengukur linier HEIDENHAIN pada sumbu X-Y-Z dengan sistem pembersihan udara terkompresi - (Presisi +/- 0,005mm). H48 – Sistem pendingin melalui spindel tipe AD. M3 – Pengubah alat otomatis 40 stasiun. M6 – Fasilitas penggantian alat horizontal-vertikal. M8 – Perangkat penggantian alat yang digerakkan oleh motor. Pengubah alat digerakkan oleh servomotor. Peralatan hidrolik. Penutup tirai logam depan untuk area ram bagian atas dan bawah, bersama dengan pelindung logam pada sisi samping kolom, antara meja mesin dan penyangga pemandu belakang, yang melindungi gerakan vertikal ram. CE10 - PERLINDUNGAN pada bagian belakang dan kedua sisi samping kolom mesin. P20 - Platform operator yang dipasang pada kolom dan bergerak bersamanya ke arah sumbu "X". Panel operator utama dipasang di dalam area platform operator untuk mesin tanpa panel kontrol operator dan dapat diakses dari bagian belakang mesin. D7 + D50A - Sistem pendingin dengan tangki berkapasitas 1000L dengan dua pompa yang menghasilkan tekanan tinggi dan rendah, memberikan 5 & 12 bar dan laju aliran 50L/menit. Filtrasi kertas dan magnetik. E30A – konveyor serpihan FL8000, sabuk konveyor engsel. Lebar 350mm PW11B – Sistem area kerja pendulum. PM2 x 2 – Mesin disiapkan oleh Soraluce untuk penambahan dua meja putar. Penerangan area kerja. Sistem pendingin kabinet listrik. Penerangan kabinet listrik. Metode kerja - Sesuai dengan peraturan keselamatan CE. Filter untuk memastikan kompatibilitas elektromagnetik. Perlindungan pada kedua sisi kolom dengan bumper pengaman. Baut pengikat. Warna standar - Biru RAL 5005 / Abu-abu RAL 7035 K19 – Dua set dokumentasi mesin (Satu salinan cetak, satu dalam CD ROM). Pelat

Kondisi: belum diuji (bekas), Tahun pembuatan: 1996, berat kosong: 800 kg, diameter 1,5 - 160 MM langkah 400 MM Hedpowgm Sasfx Afnou berat 800 KG

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 650 mm, diameter pembubutan: 400 mm, Fanuc Oi-TD control 3-jaw chuck, diameter 250 mm 12-position turret Tailstock Chip conveyor The machine has only 4051 power-on hours Hodpovi Haqsfx Afnsu Technical details: Swing diameter: 650 mm Turning diameter: 400 mm Turning length: 650 mm X-axis travel: 230 mm Z-axis travel: 650 mm Max. spindle speed: 4500 rpm Number of tool stations: 12 Spindle drive capacity: 11/15 kW Weight approx.: 5400 kg Technical data, accessories and machine description are non-binding.

Kondisi: bekas, Pressing force 160 t Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance table/ram, large stroke top, adjustment top: 800 mm Additional information Extendable table Hedjiulkqepfx Afnsu

Kondisi: bekas, Length: 1800 mm Hedpecxxu Djfx Afnou Width: 1200 mm Machine weight approx.: 1.6 t Required space approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Kondisi: baik (bekas), The listed driven tools VDI 50 are designed for a tool turret by SAUTER and are in good condition and fully functional. These tools have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufactured by NACKE + WTO, VDI 50 for SAUTER brand tool turret: Item No.: XVI 24275 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 Hedpfx Afsbql S Hjnsu 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany