Flexible Fertigungszelle

SORALUCE

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.200 mm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, kecepatan pemakanan sumbu X: 12 m/menit, laju pemakanan gandar Y: 12 m/menit, laju pemakanan sumbu Z: 12 m/menit, kecepatan spindel (maks.): 3.000 rpm, lebar meja: 1.200 mm, diameter pemasangan: 50 mm, daya: 0,028 kW (0,04 hp), RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of manufacture: 2002 Capacities / Travel: Longitudinal (X): mm 2,500 Vertical (Y): mm 1,600 Cross (Z): mm 1,200 Bwedjrp H D Topfx Am Iel Table size: Length: mm 2,860 Width: mm 1,200 Paintwork: RAL 5005 and RAL 7035 Tool holder: ISO 50, DIN 69871 Form AD Main drive: Drive power: 28 kW Spindle speed range: Spindle speed: rpm 20-3,000 Full power from: rpm 250 Feed rates: X, Y, and Z axes mm/min 2 – 12,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 15,000 Weight: kg 22,200 Heidenhain 426 Heidenhain CNC control 426M with digital drive technology, Electronic handwheel HR 410 Automatic milling head, Diagonal H26 Automatically indexing Soraluce “Diagonal” milling head, type H26, incl. long spindle for internal coolant supply. 2.5° indexing in both joints and speeds up to 3,000 rpm. Clamping via Hirth coupling in both joints. Repeat accuracy +/-3 arc sec or 0.002 mm. Bearings: FAG spindle bearings with steel balls. Includes pneumatic locking. 3D thermal expansion compensation Automatic tool changer: Number of magazine stations: 40 Chip conveyor Coolant lubrication system Tank capacity 500 l + 150 l, delivery rate 40 l/min, delivery pressure 3/8 bar (2 pumps) with outlet via spray ring and internally cooled tools DIN 69871 Form AD Complete enclosure RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured through a rigorous selection process and subjected to a thorough (deep-dive) inspection. After intensive cleaning, all identified obvious defects and faults were professionally repaired by our specialist service team.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Turning and Milling Center – DMG GILDEMEISTER – CTX gamma 1250 TC Year of manufacture: 2009, used as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately ready for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B-axis. Basic machine data: * Partial hollow clamping device (hydraulic) * C-axis * Upper compound slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, taper: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct linear measuring systems on X, Y, and Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar capacity: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turning-milling spindle: * Tool taper: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine footprint approx. (W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight approx.: 18.5 t Bodow Hg Nlspfx Am Ijwl EQUIPMENT: Well equipped … * No steady rest * Complete documentation available No guarantee as to the completeness or accuracy of the technical data or equipment. Detailed technical specification sheet and equipment information available on request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, gerak cepat sumbu X: 25.000 m/menit, pergeseran cepat sumbu Y: 25.000 m/menit, tahun perombakan terakhir: 2025, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Technical specifications of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel distances: X-axis (mm): 2,500 Y-axis (mm): 1,250 Z-axis (mm): 1,000 Rotary table size: Length (mm): 1,000 Width (mm): 1,000 Spindle speed range (rpm): 15,000 Feed rates X, Y & Z axes (mm/min): 10 – 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power (100% duty cycle): 25 kW - Chip conveyor - Coolant system - 3D thermal expansion compensation Bsdpev Rw Uujfx Am Iewl - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA linear guideway system RUE 45 on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us through a strict selection process and subjected to a thorough examination (deep-dive check). Following intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 6.500 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 1.300 mm, panjang pemakanan sumbu X: 10.000 mm, panjang umpan sumbu Y: 10.000 mm, panjang umpan sumbu Z: 10.000 mm, gerak cepat sumbu X: 35 m/menit, pergeseran cepat sumbu Y: 35 m/menit, pergerakan cepat sumbu Z: 35 m/menit, kecepatan spindel (maks.): 7.000 rpm, kecepatan spindel (min.): 20 rpm, panjang meja: 8.000 mm, lebar meja: 1.100 mm, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Year of manufacture: 2016 Travels / Motion ranges: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: 7 units Width of T-slots: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 43 kW at 100% duty cycle Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axes: 2 – 10,000 mm/min Max. Rapid traverse: X, Y, and Z axes: 35,000 mm/min Base area SLP8000 (without enclosure): 13.0 x 4.5 m Overall height: approx. 4.4 m Bedpfx Amjxvx Amj Iswl Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, diagonal H207 Adapter - Angular milling head SK50 with Hirth gearing Automatic tool changer with 60 magazine positions Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line undergo a strict selection process and a comprehensive inspection (deep-dive check) by us. After thorough cleaning, any identified obvious defects and faults are professionally repaired by our expert service team.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 6.473 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Bwedpfoyhwpwjx Am Iel Available immediately. Technical Specifications: - Control: Siemens 840D - Travel X/Y/Z axis: 730/730/880 mm - C-axis travel: 360° - Rotary table clamping surface: 500 x 500 mm - Spindle speed: 20–15,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Pallet changer with 2 positions - Automation interface available Equipment: - Internal coolant system, 70 bar with belt filter system - Work area rinsing - BLUM touch probe - Rinsing pistol - Chip conveyor - Signal light - Handheld control device Inspection / Test run on site under power by arrangement possible. We can also offer you transport, installation, and commissioning at your site. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation for DMG machines and other well-known manufacturers. We support you! From machine purchase through transport and installation to commissioning and subsequent maintenance or repair work—you can count on us.

Kondisi: bekas, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 14.000 mm, jarak lintasan sumbu Y: 4.500 mm, jarak gerak sumbu Z: 1.900 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2023 Travel/Cutting Capacities: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5 mm) Transverse (Z): 1,900 mm * The vertical machining path can be extended by 576.5 mm through the two horizontal positions of the automatically indexing milling head. Table field (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: Units: 12 T-slot width: 22 mm Distance between slots: 250 mm FIBRO rotary & sliding table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holding fixture: ISO 50, DIN 69871 AD Big Plus Pull stud: DIN 69872 Form A Main drive: Type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle, 53 kW (S1) Spindle speed range: Spindle speed: 20–4,000 min-1 Max. torque: S1 – 100% duty cycle, 1,531 Nm Max. feed force: X, Y, and Z axis: 31,000 N Max. rapid traverse speed: X, Y, and Z axis: 25,000 mm/min STANDARD EQUIPMENT OF THE MACHINE: Heidenhain CNC control system TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor exit Coolant system with 20 bar & through-spindle coolant supply (IKZ) DYNAMICS ACTIVE STABILIZER+ “DAS+ SYSTEM“ Cross-axis compensation Automatic milling head changing system Operator platform Camera for work area monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven offer for a profitable introduction to our product lines. Bsdpfxoyu Szno Am Iswl Machines available in this line are procured by us after a strict selection process and subjected to a thorough inspection (Deep-Dive-Check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.200 mm, gerak cepat sumbu X: 25 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 20 rpm, lebar meja: 850 mm, beban meja: 5.000 kg, panjang meja: 2.700 mm, berat keseluruhan: 15.500 kg, tahun perombakan terakhir: 2024, RefurbishmentPLUS by Dornhöfer The Difference. Including Installation & Commissioning! Bwjdpfxoun Nnqj Am Iel MAIN TECHNICAL DATA Year of Manufacture: 2007 Capacities / Travel Range: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Transverse (Z): 1,200 mm Table Dimensions: Length: 2,700 mm Width: 850 mm Number of T-slots on Table Surface: 6 Width of T-slots: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. Table Load: 5 t/m² Paintwork: RAL 5011 (steel blue) and RAL 7035 (light grey) Tool Interface: ISO 50, DIN 69871 AD Pull Stud: DIN 69872 Type A Main Drive: Drive Power: 100% duty cycle, 24 kW Spindle Speed Range: Spindle Speed: 20–4,000 rpm Torque: 479 Nm Feed Rates: X, Y, and Z axes: 10–10,000 mm/min Max. Rapid Traverse Speed: X, Y, and Z axes: 25,000 mm/min Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic Milling Head, Diagonal H200 Chip Conveyor Coolant System STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3 m coiled cable - Hydraulic weight compensation acting directly on vertical slide - 3D thermal expansion compensation for Heidenhain CNC path controls - Complete splash guard with two front doors and one rear door, enabling machine operation from both front and rear. All doors fitted with viewing windows - Heidenhain AC servo motors on all axes with diagonal drive technology - INA RUE 45 linear roller guideway system on all axes with central lubrication - Ball screws (IT5) on all axes - Direct linear measuring system by Heidenhain on all axes - Telescopic covers for X-axis guideways - Automatic cycle lubrication for all axes and moving components - Work area lighting Refurbishment+ – What does that mean? The RefurbishmentPLUS line provides you with a machine that has been technically and visually restored to its original delivery condition without compromise. All assemblies have been completely dismantled, repainted, and reassembled using new original spare parts. Cables, hydraulics, guideways, spindles, rolling bearings – all new!

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Misinvestment by a corporation. The machine is brand new and unused (already delivered). There are no lead times—immediately available. A truly rare opportunity. Machine type Horizontal Machining Center with Pallet Changer Series NHX 8000 Control Siemens S840Dsl with CELOS Measuring System Fully Closed Scale Feedback (X/Y/Z) Machine Concept DCG Travel X/Y/Z 1,400 / 1,200 / 1,350 mm Rapid Traverse X/Y/Z 50,000 mm/min Pallet System Pallet Changer, Turn-Type Number of Pallets 2 Pallet Size 800 × 800 mm Pallet Load 2,200 kg [optional 3,000 kg] Max. Workpiece Ø/H 1,450 mm / 1,450 mm Pallet Change Time 16 s B-Axis Direct Drive Minimum Indexing 0.001° Max. Speed 100 rpm Spindle powerMASTER Speed 16,000 rpm Power 85/50 kW (10% DC / Continuous) Torque 549/279 Nm Mounting HSK-A100 Cooling Centralized Spindle Cooling Internal Cooling optional CTS 7 MPa Tool Magazine Chain Magazine with 60 Stations [optional 100/120] Rack Magazine Options 180 / 240 / 330 Stations Max. Tool Diameter with Adjacent 110 mm Max. Tool Diameter without Adjacent 320 mm [if >10,000 rpm: 230 mm] Max. Tool Length 800 mm Max. Tool Weight 30 kg Tool-to-Tool 1.9 s Cut-to-Cut 5.0 s Bjdpfx Amsxizdas Iowl Equipment / Options Workpiece Probe Tool Measurement System Laser Monitoring optional High-Pressure Coolant 7 MPa optional Chip Conveyor Full Enclosure with Roof Dimensions n.a. Weight n.a. Connection Data n.a.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.200 mm, jarak gerak sumbu Z: 1.500 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2018 Capabilities / Travel Paths: Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Transversal (Z): 1,500 mm Table Size: Length: 6,000 mm Width: 2,500 mm T-slot Width: 22H12 mm Distance Between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool Holder: ISO 50, DIN 69871 AD Main Drive: Drive Type: Water-cooled inline motor Drive Power: 100 % DC, 43 kW Speed Regulation: Infinitely variable via water-cooled inline motor with star-delta switching Bodpfxjyu Swcs Am Iswl Spindle Speed Range: Spindle Speed: 20–7,000 min-1 Torque at 37 kW/S1: 900 Nm (1045/S6) Max. Feed Force: X, Y, and Z axes 20,000 N Max. Rapid Traverse Speed: X, Y, and Z axes 35,000 mm/min Weight: approx. 44,500 kg STANDARD MACHINE EQUIPMENT: Heidenhain CNC Control TNC640 Automatic Milling Head, Diagonal (stepless) Automatic Tool Changer (40 positions) Chip Conveyor Coolant System with 20 bar & (IKZ - internal coolant supply) Prepared for NC Rotary Table Deep Hole Drilling Confirmation RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us following a strict selection process and subjected to thorough inspection (Deep-Dive Check). After intensive cleaning, any apparent faults and defects identified are professionally repaired by our expert service team.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 20 rpm, lebar meja: 850 mm, panjang meja: 3.700 mm, berat keseluruhan: 18.500 kg, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of manufacture: 2007 Travels / Axis movement: Longitudinal (X): mm 3,500 Vertical (Y): mm 1,250 Cross (Z): mm 1,000 Table size: Length: mm 3,700 Width: mm 850 T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Bjdpfx Amsxgn Efo Iswl Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle, 24 kW Spindle speed range: Spindle speed: min-1 20–3,000 Torque: Nm 479 Max. feed rate: X, Y and Z axes, mm/min 25,000 Mean acceleration: m/s² 2 Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Rotary control pendant including Heidenhain iTNC 530 controller (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatically indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic Tool Changer: Automatic tool changer (random-access turret) with 20 tool magazine positions: Automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip Conveyor Package: Three chip conveyors: two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, ejection height: 1,000 mm Coolant System 2: Coolant lubrication system 2 with ring nozzle outlet and internal coolant supply compliant with DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of the high-pressure pump (from 15 bar). RepairFIT is our proven solution for a profitable entry into our product portfolio. The machines available in this product line are sourced through a strict selection process and undergo a thorough inspection (Deep-Dive-Check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Daya potong maks.: 220kN, daya laser: 3200W, sambungan nitrogen: 30bar, sambungan oksigen: 20bar, daya terpasang: 76kVA, jam operasi awal 2025: 67.766 jam, dengan laser Trumpf TLF 3200 dan pendingin RIEDEL L 15/21 TR3/19.00, refrigeran: R134a, berat pengisian: 11,5kg, tekanan tinggi: 20,2bar. Alat tambahan tersedia. Pemeriksaan di lokasi memungkinkan. Bodpfxjw Uk A Rs Am Iswl

Kondisi: bekas, Tahun pembuatan: 2009, Verfahrweg - x 2.500 mm Verfahrweg - y 1.000 mm Verfahrweg - z 1.250 mm Steuerung HEIDENHAIN - iTNC 530 Drehzahlbereich 20 - 4.000 U/min mit NC-Rundtisch 1.000 x 1.000 Tischaufspannfläche 2.700 x 850 mm Anzahl der Plätze im Werkzeugwechsler 40 Bodey E Txwopfx Am Iowl Werkzeugaufnahme SK50 CNC Bettfräsmaschine | SORALUCE - TA-25-A mit NC-Rundtisch, Funkmesstaster und 40-fach Werkzeugwechsler ausgestattet. Die Maschine ist in einem guten Zustand und kann unter Strom besichtigt werden. Bitte entnehmen Sie weitere Ausstattungsinformationen zu dieser Maschine aus der im Angebot beigefügten Original- Auftragsbestätigung. Die Maschinenvideos vom Werksstandort teilen wir gerne auf Anfrage mit Ihnen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TA25A | TA-25 A | TA 25 A

Kondisi: bekas, Tahun pembuatan: 2012, FP-8000 Bsdjy E Txkjpfx Am Iewl

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 730 mm, jarak gerak sumbu Z: 850 mm, gerak cepat sumbu X: 50.000 m/menit, pergeseran cepat sumbu Y: 50.000 m/menit, pergerakan cepat sumbu Z: 50.000 m/menit, daya nominal (semu): 22 kVA, produsen pengendali: MORI SEIKI, model controller: MSX-711 IV, beban meja: 500 kg, jumlah slot dalam magazin alat: 60, panjang alat: 500 mm, diameter alat: 140 mm, berat alat: 12 g, Horizontal Machining Center MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center designed to deliver high precision, reliability, and continuous productivity, even for the most complex machining operations. Main Features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine dimensions (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Work Capacity (axis travels): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle center to pallet surface distance: 100 – 830 mm Spindle nose to pallet center distance: 100 – 950 mm Max workpiece dimensions: Ø800 x 1,000 mm Rotary Table: Dimensions: 500 x 500 mm Number of stations: 2 (automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverses (X/Y/Z): 50,000 mm/min Working feedrates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: Mori Seiki 90° type Tool magazine capacity: 60 positions Max tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max tool length: 500 mm Max tool weight: 12 kg Bedpfx Amowxygzs Ijwl Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle Spindle head chiller and transformer Retractable tool presetting sensor Complete technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and high-volume production, the NH-5000 DCG/40 offers structural rigidity and cutting-edge CNC technology, ensuring high-speed and precise machining of complex components.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Ukuran meja 6000 x 1100 mm, sumbu lintasan X Y Z 4500 x 1600 x 1300 mm, berat maksimum benda kerja 5000 kg, tirus spindle DIN 50, kapasitas toolchanger 40 stasiun, kecepatan spindle 5.000 rpm, kepala otomatis, konveyor serbuk logam, meja putar sumbu ke-4. Bjdey Ey Rtepfx Am Ijwl