Mesin finishing getar

SPALECK SEWU 1400 3000 FS

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration Itodpfx Asx D H Hcsa Doi • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Manufacturer: KASTO Model: KASTOtec A3 Itedpou R R Acsfx Aa Dei Year of manufacture: 2001 Specifications Metric US Standard Cutting capacity round 90°: 330 mm Cutting capacity flat 90°: 330 x 330 mm Max. cutting speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Dimensions (approximate) Length: 4600 mm Width: 2150 mm Height: 2310 mm Weight: 4300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm Itjdpfouu Ntgjx Aa Dei - Liczba miejsc na narzędzia w magazynie: 8 - Stół roboczy: stół rastrowy aluminiowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Nr seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 - praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramowa: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 r. - jedna umieszczona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h. Interfejs do odczytu formatów CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Kondisi: baik (bekas), Tahun pembuatan: 2019, Robot industri Produsen: Kuka Tipe: KR60 HA Tahun pembuatan: 2018/2019 jam operasional rendah Jangkauan: 2033 mm Berat: 665 kg Kapasitas angkut: 60 kg Kontrol Kuka KRC4 Berat 150 kg Perangkat lunak V8.3.40 Kuka Touchpanel Kabel penghubung Kuka Iedsn Utbgepfx Aa Doti

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edge banding machine was manufactured in 2024. It features a rotary table magazine with a 750 mm diameter for edge material from 0.4 to 3 mm, a GlueBox application unit, as well as upper and lower polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15' SmartTouch screen and a multifunctional milling unit for precise processing of plastic edging. Contact us for further information about this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Upper and lower polishing unit Itjdpfx Aasx D Hbts Dei Machine benefits Technical machine advantages • Height adjustment for positioning workpieces: 8-60 mm • Diameter of rotary table magazine: 750 mm for edge material 0.4-3 mm in rolls • Rotary magazine for edge material with ball bearing, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 hp), 12,000 rpm, carbide saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°-10° • Upper and lower multifunctional milling units // upper and lower profile sanding machine x-motion plus for processing plastic edges of 2 and 3 mm • Controlled corner unit with 2 motors, motorized adjustment for milling the end grain profiles of the top/bottom edge for edge thicknesses from 0.4-3 mm and feed rates up to 10 m/min • Pre-milling unit with paired diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement using Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control x-motion Plus control with 15' SmartTouch

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), A CNC precision parallel lathe by Pinacho is available. Center height: 180 mm, center distance: 750 mm - 1000 mm, turning diameter over bed/cross slide/top slide: 360 mm/335 mm/198 mm, bed width: 250 mm, spindle bore: 42 mm, spindle speed: 4000 rpm, feed rate X/Z: 10 m/min, rapid traverse X/Z: 10 m/min. Tailstock quill diameter: 58 mm, tailstock quill travel: 200 mm, Morse taper: MT3, min. steady/follow rest passage: 10 mm, max. steady/follow rest passage: 70 mm / 114 mm, control: Fanuc 0i. Documentation available. On-site inspection possible. Isdpfewftcvox Aa Djti

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Itodov Scrhopfx Aa Dji

Kondisi: baru, Tahun pembuatan: 2026, Technical Parameters TURNING DIAMETER OVER BED: 360 mm TURNING DIAMETER OVER SLIDE: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100-2000 rpm SPINDLE BORE: 47 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20x20 mm TAILSTOCK QUILL: MT3 MAX. TAILSTOCK QUILL TRAVEL: 100 mm MOTOR POWER: 3.7 kW Ijdpef Ey Umefx Aa Djti DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available Equipment - SINUMERIK 808D CNC control with Polish language - SIEMENS brand servo drives - 3-jaw hydraulic lathe chuck - 8-position turret head - Set of soft jaws - Hydraulic tailstock - Coolant system - Automatic lubrication system for gearbox and guides - 24V halogen lighting - User manual (DTR) in Polish - CE Declaration The price stated is NET. The price does not include transport costs. For more information, please contact us by phone or email. Please visit our website to view our full offer.

Kondisi: bekas, Tahun pembuatan: 2013, Drahterodiermaschinen / EDM Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 350 mm Ukuran benda kerja maksimum X: 800 mm Ukuran benda kerja maksimum Y: 570 mm Iedpfx Aoy S Tgzea Doti Ukuran benda kerja maksimum Z: 340 mm Berat maksimum benda kerja: 1000 kg Ukuran meja X: 1050 mm Ukuran meja Y: 710 mm Dengan penyusunan kawat otomatis Sumbu U / V: 150 x 150 mm Pemotongan dalam rendaman air Kontrol CNC: SPW

Kondisi: bekas, Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm Isdpfxoyq Szto Aa Doti - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...