Stacking box/Eurobox

SSI Schäfer EF6220

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Dedpfofv Awaex Aavjcp Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force over the entire stroke length. They are primarily used when processing long-stroke parts with consistent force is required. Convincing technology: • Long and precise spindle guidance ensures maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings on the piston for smooth and consistent running • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against twisting • For the PND 85/S, spindle return is effected via only one cylinder chamber—providing additional air savings • Working height fine adjustment is simple, quick and precise in 2 stages: – Basic adjustment by loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings.

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Connected load: 18 kW, but the unit was completely overhauled in 2017. An inspection is possible. Dcodpfx Ajn Htkteavop

Kondisi: baru, Tahun pembuatan: 2025, Sistem pendingin efisien dengan R290 – pendingin udara, andal, dan ramah lingkungan. Model kami mencakup kapasitas 20 hingga 800 kW dan menawarkan opsi fleksibel dengan atau tanpa free cooling. Keunggulan: Pendingin ramah lingkungan R290 dengan potensi pemanasan global rendah Pendingin udara, pompa internal, dan tangki Opsi: dengan free cooling—memanfaatkan udara luar untuk pendinginan tambahan, mengurangi konsumsi listrik terutama di bulan-bulan dingin Skalabilitas dari 20 hingga 800 kW sesuai kebutuhan Anda Sistem kontrol canggih Dedsfqllwepfx Aavocp Konsultasi, perencanaan, dan pengukuran khusus Waktu pengiriman tergantung pada konfigurasi dan perlengkapan Operasi berkelanjutan berkat emisi CO2 rendah dan biaya operasi yang rendah Kami siap memberikan konsultasi untuk menentukan versi yang paling sesuai dengan kebutuhan Anda.

Kondisi: baru, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min-max): 70 - 220 mm Table dimensions: 190 x 140 mm Spindle diameter: 30 mm Dsdpefv Avvsfx Aavjcp Machine weight: approx. 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle Lever Pneumatic Presses Including precise working height adjustment via bevel gear with side-mounted crank—easy and convenient to adjust. Toggle lever pneumatic presses are used whenever maximum pressing force is required shortly before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Kondisi: baru, Pressure 2.5 kN Stroke 45 mm Throat depth 90 mm Working height from 80 to 220 mm Table surface 120 x 60 mm Machine weight approx. 22 kg Dimensions (L x W x H) 160 x 230 x 390 mm Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion mechanism. It is used wherever a constant pressure is required during the working process. Precisely manufactured, spindle hardened and ground, unlimited service life Dcodpfx Aefv Av Isavop Long spindle guide, optimal pressing performance, Centrally milled T-slot to DIN 650, T-slot nuts fit precisely.

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB Dodpfswypqljx Aavscp - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Kapasitas pendinginan: 10 kW Kapasitas pemanasan: 11 kW Produsen: Airwell Tipe: HRW 36 Refrigeran: R407C Tahun: 2013 Dimensi keseluruhan: 1055x745x465 mm Lihat foto untuk diagram pengoperasian dan batasan operasional. Dcsdpfxofx S Dae Aavop Mesin tidak diisi dengan gas refrigeran.

Kondisi: baru, translate-001 Dedpfx Aasdxq Dyjvscp

Tahun pembuatan: 2018, Kondisi: baik (bekas), Mesin las sudut otomatis penuh / Mesin las sisi otomatis penuh Produsen: Diez Tipe: AWS-C 9070 CS Tahun pembuatan: 2018 Terowongan penyusutan Produsen: Diez Tipe: HTC 122-40D Tahun pembuatan: 2018 Sisi pengoperasian: Di sisi kiri arah aliran Lebar bukaan: sekitar 600 mm Tinggi bukaan: sekitar 190 mm Panjang las: sekitar 900 mm Tinggi kerja / tinggi ban masuk-keluar: sekitar 860 mm +100 Kapasitas: Hingga 30 siklus/menit (tergantung pada ukuran paket dan kecepatan pengumpanan) Tegangan suplai: 230V AC, 50Hz, 1 Fasa + N + PE Konsumsi daya: 3,5 KW Arus nominal: 10 A Dilengkapi dengan kabel dan steker Schuko 16A Sambungan udara bertekanan: 6 bar Djdpfx Aetzcd Ssavjcp Dimensi luar: Panjang: 2600 mm Lebar: 2000 mm Tinggi: 1500 mm 41126

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, gaya penekanan: 15 t, Hidralmac Single Column Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic single column combination press from the manufacturer Hidralmac with a press force of 15 tons. The machine is configured as a manual special solution and is particularly suitable for flexible assembly, straightening, and pressing operations in workshop and service areas. The table plate can be swung out to the left. The lower base plate can be inserted at 3 different heights. The ram can be manually moved downwards with the aid of the cross handle. Special features of this press: The operator can very sensitively build up pressure from 0 to 1.5 T. This is very important, for example, when pressing in ball bearings. We have supplied this press type several times to the aviation industry, where precise and careful work is crucial. After exact positioning, a pressure of up to 15 tons can then be applied via the hand pump. ##### Technical data + information: Assembly/disassembly press – 15 T – 270 × 600 mm ==== General information - Design: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Pressing force: 0–15 T - Table size: 270 × 600 mm - Installation height: 650 / 800 mm Dodpfx Asfhcc Ijavecp - Table height from floor: 750 mm - Hole in table: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel construction - Table: swing-out feature - Lower table: height adjustable (3 positions) ==== Hydraulic cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & drive - Drive: manual via hand lever and hand pump - Fine control: 0–1.5 T via cross handle - Hand pump: 0.5 l - Pressure gauge: manometer ==== Controls - Operation: manual via hand lever and cross handle - Pressure regulation: mechanically, with sensitive adjustment ==== Safety - Anti-rotation lock - Sturdy frame construction ##### Fields of application: Press-fitting, press-out operations, assembly, disassembly, straightening, bearing handling, workshop tasks, maintenance, precision assembly, on-site service, small batch production Hydraulic press, hydraulic machine, assembly press, disassembly press, workshop press, 15 T press, 15 ton press, manual hydraulic press, C-frame press, single column press, C-press, hand press, pressing-in press, bearing press, industrial press Looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which builds on these standards. Our main strengths are custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulics of our presses are primarily equipped with components from leading European manufacturers.