Robot controller CS7MB RX60

Stäubli RX 60

Kondisi: baik (bekas), Stäubli Type: RX 60B EX Robot: Lifting capacity (nominal load - kg): 2.5 kg   Weight: 44 kg Type: RX 60B EX Control unit: 3x400V - 50/60 Hz - 3000VA Weight: 170 kg Nodpfxsbwz Ice Abmewp Type: CS8 EX RX60B EX Robot is offered without functional guarantee! Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), Roboter Hersteller: Staeubli Nodpfxsbrhtdo Abmjwp Typ: RX170 251125ä

Kondisi: bekas, TECHNICAL DATA RX60CR from 1998 with its CS7B cabinet RX60B from 2002 Nwjdpfxjug U Avs Abmjp

Kondisi: baik (bekas), Stäubli Model: RX60 L Stäubli Robot RX 60 L with control unit and handheld pendant Control unit: RX60 Payload (nominal load - kg): 1.5 kg Suitable for assembly cell / robot cell! Total weight: 44 kg Njdpfx Abocgfgqsmswp Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Kondisi: baik (bekas), Oil Diffusion Pump Manufacturer: Leybold Model: DIP 50,000 Condition: Used Technical Data Product: DIP 50000 Catalogue No.: 22240 Inlet Flange (Suction Side): DN 1000 ISO-F Outlet Flange (Pressure Side): DN 160 ISO-K Pumping Speed for Air Below 1.0 x 10⁻⁴ mbar / 7.5 x 10⁻⁵ Torr: 50,000 l/s Operating Range: 1.0 x 10⁻² - 5.0 x 10⁻⁷ mbar / 7.5 x 10⁻³ - 3.8 x 10⁻⁷ Torr Ultimate Total Pressure: < 5.0 x 10⁻⁷ mbar / < 3.8 x 10⁻⁷ Torr Max. Permissible Forevacuum Pressure: 6.0 x 10⁻² mbar / 4.5 x 10⁻² Torr Operating Fluid: Pump is supplied without operating fluid Operating Fluid Quantity Min.: 12.0 l / 12.7 qt Max.: 25.0 l / 26.4 qt Power Supply: 3-phase Y, 400 V, 50/60 Hz Heating Power: 24 kW Number of Heating Cartridges: 24 Heat-up Time: < 30 min Number of Cooling Water Circuits: 3 Cooling Water Minimum Pump: 1,500 l/h / 6.6 gal/min Jet Cap Vapour Trap: 150 l/h / 0.66 gal/min Nwodednv A Uopfx Abmop Max. Cooling Water Pressure: 6 bar / 87 psi Cooling Water Connection Pump: 1/2", internal thread Jet Cap Vapour Trap: 3/8", internal thread Dimensions: see dimension drawing Weight: 560 kg / 1,235 lbs

Kondisi: bekas, Rotary vane vacuum pump – oil-lubricated Manufacturer: Leybold Model: Sogevac SV 200 Cat. No.: 10927 Condition: Fully overhauled Warranty: 12 months Includes: Oil fill (mineral oil), operating manual with spare parts list Voltage: 50/60 Hz 230-400/460 V Motor rating: 4 kW Nominal pumping speed: approx. 200 m³/h Ultimate pressure without gas ballast: approx. 0.08 mbar Nwodpfxjcnyy Ho Abmjp Availability: ex stock

Kondisi: baik (bekas), Tahun pembuatan: 2018, Internal Article No.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Approx. 1,000 spindle hours since spindle replacement Machine approx. 20,500 hours total Nwsdpewz I Acsfx Abmop 2024: Spindle replaced (18,000 rpm) 2024: Geometry recalibrated. Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360 degrees, continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, diameter 500 mm - Infrared workpiece measurement - 3D probe - Tool measurement via BLUM laser - Rotating viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active switch cabinet cooler, air-to-air - Active cooling for 4th and 5th axes, controlled - Network connection + USB port - Controlled spindle chiller - Heidenhain rotary measuring system - Profile safeguarding POSkontur - External hinged belt chip conveyor - Coolant pump at head, operated by M-functions - Pump for chip flushing device - Chip flushing device - Operating status indicator - Air at the spindle - Oil/coolant separator, electromechanical - Automatic coolant fill-level monitoring - 3-way media interface at table center - Hydraulic unit incl. control via M-function Connected load: 60 kVA Footprint: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH) 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in excellent condition and comes from a small, family-run company. In 2024, the spindle was replaced and the geometry recalibrated (guides repaired and adjusted). Since then, the machine has seen very limited use.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, KUKA KR10 R1100 sixx KRC4, including panel, cables, and control cabinet. 15,700 operating hours We are happy to offer the robot fully refurbished upon request! 2 more units available with: 16,500 operating hours Nwedpfx Aemdrpvobmsp 16,000 operating hours

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel (X/Y/Z axes): 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Floor space required: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control system: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extraction: ELBARON Nwedpfx Asup Hw Eobmjp - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Kondisi: bekas, EZSET EZ400 tool presetting device Nwjdpouhb Stofx Abmep