Robot industri

Stäubli TX 90

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: CS8C, lebar total: 2.650 mm, tinggi total: 2.000 mm, kapasitas angkut: 6 kg, Pabrikan: Stäubli Tipe: TX90 Deskripsi: Robot Tipe kontrol: CS8C Tipe panel: KeTop C 100 Beban nominal: 6 kg Deskripsi: Sistem Las Ultrasonik Herrmann Tipe: VE Compactline Solid STE Knsdpev N U Tlsfx Aahjf Plasma Sonotrode: 4000600 Kontrol Plasma: ST1200 Deskripsi: Meja Putar Pabrikan: Weiss Tipe: TC0500T Kontrol: TS 004 E

Tahun pembuatan: 2002, Kondisi: baik (bekas), nomor mesin/kendaraan: SIKBK, Demag KBK crane runway approximately 10x6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/suspensions, etc. Including Demag DK2 500 kg electric chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails available from stock! Other KBK systems also in stock. Load capacities from 125 kg to 1600 kg. Knsdemqf Nbjpfx Aahef Please inquire about your crane runway with desired cantilever and dimensions.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F21/0023666, Perlengkapan: dokumentasi / manual, Technical specifications: Maximum load: 20 kg Rated load: 7 kg Reach: 1000 mm Number of axes: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic interface: 2 direct lines between base and forearm 2x 5/2-way bistable solenoid valves (compressed air) Electrical interface on the arm: 17 electrical I/O lines Multi-bus cable in the arm: 13 electrical lines, 4 multi-bus Cat5e lines, DIN M12 Standards and protection ratings: Cleanroom standard – ISO 14644-1: Class 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensure the highest safety levels. Control and licensing: CS9 controller with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Operating panel (with 5m cable) Knjdpfepd In Dsx Aahjf This robot not only offers impressive technical parameters but also ensures the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For further information or a tour, please contact us by email or phone (in English). We are happy to answer your questions and look forward to your inquiry.

Kondisi: sangat baik (bekas), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance TX90 series robots for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact and slim design. With three mounting options—floor, wall, and ceiling—the six-axis unit is easy to integrate. The fully enclosed construction (IP65) enables usage in cleanroom environments or under aggressive ambient conditions. Features - Fully enclosed design with internal supply lines Kedpfx Aaowbqwcjhjnf - Rigid structure - Multiple mounting options - Patented Stäubli JCM gear modules - Large reach Advantages - Perfect protection of components - Standard model in ISO 5 cleanroom class - Easy to clean - Excellent dynamic path performance - High flexibility - Precision, dynamic motion, and speed with reduced maintenance requirements - Optimal use of the work envelope Technical Data Type: TX90L Degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist): IP65 (IP67) Mounting positions: Floor / Wall / Ceiling Controller: Stäubli CS8 / CS8C Controller Features - Ethernet, fieldbus, digital inputs and outputs, serial interfaces - Easy integration, 19-inch rack version, protection class IP20 - All connections on the front side - Proven digital technology Advantages - Open architecture - Compact design - Good accessibility - Reliable Technical Data: Type: CS8C Dimensions (H x W x D): - 331 x 445 x 455 mm - 481 x 445 x 455 mm Protection class: IP20 (IP54 optional) RAM: 64 MB (min.) Storage: 128 MB (min.) flash disk and USB port System/programming language: VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 compatible Communication: Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See image) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, jarak tempuh: 590.000 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 01/2018, jenis bahan bakar: diesel, berat keseluruhan: 27.000 kg, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 730 kg, kapasitas angkut: 14 kg, jangkauan lengan: 1.000 mm, ROBOTIC ARM Payload: 14 kg Maximum reach (between axis 1 and 6): 1000 mm Repeatability – ISO 9283: ±0.03 mm ROTARY UNIT Maximum rotation angle: 350° Safe positions: 0° / ±90° / 180° DRIVE UNIT Maximum speed: 16.8 °/s Tool docking station: 4 tools per station Knsdstqmihopfx Aahjf Tool change system: MPS032 Maximum speed: 0.6 m/s Platform positioning accuracy: ±10 mm, 1° Dimensions (without robotic arm): 890 x 1120 x 1000 mm (W x H x D) Number of laser scanners: 3 (360° monitoring range) Scan plane height (person-safe): 150 mm Drive type: differential drive COMPLETE SYSTEM Navigation: based on laser scanner data Protection class wrist / arm / complete system: IP67 / IP65 / IP20 Maximum average floor contact pressure: 10 N/mm² Power supply: 1 x 230 V / 16 A Interfaces: WLAN, LAN, Fieldbus (1) Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm² contacts Battery capacity: 5.8 - 8.7 kWh Compressed air tank: 0.75 l (2) / 7 bar Optical and acoustic indicators: 4 LED units, storage for up to 16 audio files Weight: 730 kg

Kondisi: baik (bekas), Tahun pembuatan: 2009, Number of axes: 6 Ksdpfxsv Hdk Ij Aahjnf Payload: 5 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Pengecoran Logam – Inventaris Inventaris lengkap pabrik pengecoran pasir di Venlo-Lomm – Belanda Lini pembentukan HWS, Tipe SFM2 / 30 kotak/jam Kontrol S/7 Penggiling corong Mesin cetak inti Röper H6,5-H16 hidrolik – kontrol S/7 Unit pencampur pasir inti merek Klein Unit X-ray YXLON Analisis Spektral Spectro Perangkat analisis Ideco Mesin pembentuk cetakan Sistem pengolahan pasir Tungku peleburan Mesin amplas sabuk Kontainer bahan berbahaya Oven pengering Gergaji pita Unit blasting Crane gudang 32 ton / lintasan crane: 5750 mm / Tahun 2002 Anda diundang untuk mengunjungi pengecoran Peralatan dan barang dijual dalam kondisi bekas Knsdpfx Asvz Apreahsf Penjual mengecualikan semua jaminan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 550 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F/20/0020976/A/001, de-en-techspec-01 Kodpoxck Risfx Aahsnf

Kondisi: sangat baik (bekas), Year of manufacture: 2011 Reach: 1000 mm Control system: CS8C Payload: 6 kg Repeatability: ±0.03 mm Knjdpfowcd R Sjx Aahef Robot weight: 111 kg Axes: 6

Kondisi: sangat baik (bekas), Heraeus Vötsch Climate Test Chamber We are offering a Heraeus Vötsch Climate Test Chamber. Heraeus Vötsch climate chamber with humidity control (water-cooled) Test chamber internal dimensions: Width 800 mm x Depth 800 mm x Height 950 mm External dimensions: Width 1090 mm x Depth 1960 mm x Height 1995 mm Specification for temperature tests: Temperature range: -45°C to +180°C time deviation ± 0.1 to ± 0.5 K spatial deviation ± 0.5 to ± 1.5 K Rate of temperature change according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate tests: Temperature range: -45°C to +180°C Kjdpfxsmt Du Te Aahsnf Temperature deviation in steady-state, per IEC 60068-3-5 depending on test chamber temperature Temperature range: -10°C to +95°C time deviation ± 0.1 to ± 0.3 K spatial deviation ± 0.5 to ± 1.0 K Humidity range: 10% to 98% RH Temporal humidity deviation: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber volume: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your safety as a buyer, please note the following information! The following procedures are carried out on the chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are run through a test cycle, which is monitored using calibrated equipment. Condition: used Scope of delivery: (See picture) (Technical details are subject to change and errors excepted!) If you have any further questions, please contact us by phone.

Kondisi: baru, Tahun pembuatan: 2018, jam operasional: 9.000 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 110 kg, kapasitas angkut: 14 kg, jangkauan lengan: 1.000 mm, rentang pivot: 360 °, akurasi pengulangan: 0,03 mm, Perlengkapan: dokumentasi / manual, Dijual: Robot Industri Stäubli TX90 – Presisi Tinggi, Jarang Digunakan Model: Stäubli TX90 Radius kerja: 1000 mm Akurasi pengulangan: ±0,03 mm Jam operasional: hanya 9000 jam (dalam keadaan bertegangan, tidak beroperasi terus-menerus) Robot dalam kondisi teknis yang sangat baik, sepenuhnya berfungsi, dan siap digunakan segera. Ideal untuk aplikasi seperti penanganan material, perakitan, pengelem, dosing, penyuplaian mesin, atau pengerjaan ringan. ➡️ Keunggulan TX90: Desain kompak dengan radius kerja optimal 1000 mm Dinamika dan presisi tinggi (±0,03 mm) Konstruksi tertutup (IP65 / IP67 tergantung konfigurasi) – cocok juga untuk lingkungan berat Kompatibel dengan CS8 Kjdpfx Aexuwghsahjnf

Kondisi: sangat baik (bekas), Stäubli Model: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact and slim design. With three mounting options—floor, wall, and ceiling—these six-axis robots are easy to integrate. The fully enclosed design (IP65) enables use in cleanrooms or harsh environmental conditions. Features - Fully enclosed design with internal supply lines - Rigid structure - Multiple installation possibilities - Patented Stäubli JCM gear modules - Large working envelope Benefits - Perfect protection of components - Standard version suitable for cleanroom class ISO 5 - Easy to clean - Excellent dynamic path performance - High flexibility - Precision, dynamics, and speed with reduced maintenance requirements - Optimal use of workspace Technical Data Type: TX90L Degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist): IP65 (IP67) Mounting options: Floor / Wall / Ceiling Controller: Stäubli CS8 / CS8C Features Ethernet, fieldbus, digital I/O, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connectors front-facing Proven digital technology Benefits Open architecture Compact Good accessibility Reliable Technical Data: Type: CS8C Dimensions (H x W x D): 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class: IP20 (IP54 optional) RAM: 64 MB (min.) Storage capacity: 128 MB (min.) Flash Disk and USB port Operating/Programming language: VAL 3 (multi-tasking interpreter language), PLC-IEC 61131-3 Communication: Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Scope of delivery: (See picture) (Subject to changes and errors in technical data—details provided without obligation!) For further questions, we will be happy to assist you by phone. Knsdpsvx Tbtefx Aahsf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 480 mm, jarak gerak sumbu Z: 310 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, gores kuas bulu: 120 mm, tinggi total: 1.820 mm, lebar total: 1.780 mm, panjang total: 1.400 mm, lebar meja: 500 mm, panjang meja: 900 mm, berat benda kerja (maks.): 190 kg, jarak meja ke pusat spindel: 390 mm, Perlengkapan: dokumentasi / manual, en-GB-TT-001 Kedpohu Rwfofx Aahonf

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 12 kg, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, We are offering a Stäubli TX90 or TX90L robot equipped with a CS8C controller. The robot has undergone maintenance by Stäubli Service and is certified to Service Level C. The TX90 model features a reach of 900 mm, while the TX90L model offers a reach of 1200 mm. Knodpfxjurvufj Aahof The robot will be supplied with an interface cable connecting the robot arm to the control unit. Additionally, it is possible to order the SP1 control panel and further accessories upon request.