Derek kanopi Derek Derek Derek dalam ruangan Landasan pacu derek

Stahl Portalkran Brückenkran Kettenzug NL 500Kg Stahlbau 9 x 5,7m IPE300 HEA200

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), TSK001 Fgedsx Hz Ntspfx Ahusa

Kondisi: bekas, Tahun pembuatan: 2006, de-hu-001 Fgjdpewmcx Aofx Ahusa

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Fgjdpfx Ahjvt D D Uouja Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations. Fgsdpfxsg Ezarj Ahuoa

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Fedod Iipxopfx Ahujga SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Fsdpjt Hw S Iofx Ahuega Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 2010, Pillar slewing crane: mobile Outreach approx. 2500 mm Machine weight approx. 4 t Load capacity 125 kg Bucket tare weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documents/papers. Fgsdjmt Rpwjpfx Ahuea

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Fsdpfekfp D Tsx Ahujga Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Fgedpfxsrmkfno Ahuja Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), I have for sale a Deckel Maho DMU 100T Machining Centre. Fgedpfx Ahjlffzceuoa Control system: Heidenhain MillPlus Machine technical condition: Very good Year of manufacture: 2000 Country of origin: Germany Machine specifications: X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Swivelling head Maximum spindle speed: 12,000 rpm Tool magazine: 32 tools (2x16 tools) High-pressure coolant Through-spindle coolant Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Documentation Machine weight: 10 t Loading included in the price Stal-Com has been specialising for 17 years in the sale, servicing, and training on CNC machines from the DMG group. We specialise in all models of Gildemeister lathes and Deckel Maho Machining Centres. All our machines undergo a meticulous technical inspection. In addition to clients from Poland, our machines are purchased by customers throughout Europe and some parts of Asia. Each machine can be inspected during operation, as we also carry out machining services. Upon purchasing a machine from us, we provide personnel training and can also assist in setting up part production at your site. We cooperate long-term with many companies, supplying them with successive machine tools. Stal-Com Rafał Dziendziel