Kabel baja untuk penarik 1,6 ton

Stahl Ø 11 mm 20 m

Kondisi: baik (bekas), Tali baja multifungsi, Greifzug, alat pengangkat, alat pemasangan, tali baja penarik, alat penarik universal, alat tarik kawat, tali baja untuk penarik -Tali baja: untuk penarik multifungsi -Diameter tali: 11 mm -Panjang: 20 m Hsdpfsxbyaqox Agqjnk -Dimensi transportasi: 360/90/T400 mm -Berat: 12,4 kg

Kondisi: bekas, Gearboxes, bevel gearboxes, worm gearboxes Hnjdst Snwxopfx Agqsk -Gearbox: Worm gearbox, gear ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Kondisi: bekas, Technical Details: Hodpfxevc Awxo Agqenk Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke operation

Kondisi: baru, Cutting capacity at 90°: round 500 mm Cutting capacity at 90°: square 420 mm Cutting capacity at 90°: rectangular 600x400 mm Saw band dimensions: 5320 x 34 x 1.1 mm Band speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre cuts left & right up to 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free, ball-bearing supported rotary material table • Saw band guides adjustable via extra-wide linear guide • Heavy-duty, robust gearbox • Large clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Freestanding, safe, and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure regulator valve • Material height sensor (automatic cut start detection) • Ultra-fast clamping (front loading) • Hydraulic control for saw frame and vice • LEDs to monitor all safety functions • Minimum cutting capacity, round, from 10 mm Hnodpfjupxupsx Agqok Semi-automatic operation: 1. Clamp material 2. Start saw operation 3. Rapid downfeed to material or, for serial cuts, start cutting directly 4. Stop saw band 5. Raise frame just above material 6. Open vice

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 120 mm, lebar pemotongan (maks.): 350 mm, Multiblatt- und Besäumer-CML, Modell J 350 RT, CE-zertifiziert, 37 kW Hedpfsvlxbxox Agqonk

Kondisi: baik (bekas), Robland thickness planer 3 Tersa knives 1 feed speed for thicknessing Thicknessing height: 230 mm Noise-dampening combs in the table Hnodsvyhmgepfx Agqjk Table length: 140 cm Machine is operational and ready for work

Kondisi: baik (bekas), Tyres, Tractor Tyres, Soil Cultivation, Seed Drill - Quantity: 2 tyres Hedpob A Rtrjfx Agqonk - Tyre size: 180/90-16 IMP - Dimensions: Ø 700 mm - Price: for 2 tyres (complete) - Weight: 40 kg each

Kondisi: baik (bekas), Power amplifier, servo motor controller, power controller, thyristor power controller, thyristor controller, power regulator Hedpfx Agjubfyheqsnk - Manufacturer: Gefran, power controller/power regulator - Model: GTF-25-480 - Quantity: 5 power controllers available - Price: per unit - Dimensions: 150/60/H135 mm - Weight: 0.9 kg/unit

Kondisi: baru, Description Work table made of heavily ribbed grey cast iron and base frame made of welded steel ensure torsional rigidity and vibration-free operation. Unique in its performance class: sliding table made of anodised aluminium for maximum cutting precision. Cutting line directly at the saw blade. Tilting saw blade from 90° - 45°. Crosscut frame with aluminium length stop and adjustable stop jaw for panels and large workpieces. Cutter guard for profiling. Two independent motors for each working unit. TECHNICAL DATA Dimensions and Weights Weight (net): approx. 190 kg Dust Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Rated operating mode main motor: S6 Duty cycle main motor: 40 % Motor power: 2 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle Moulder Spindle shaft diameter: 30 mm Hnsdpsvwfqwjfx Agqek Usable spindle length: 75 mm Spindle speeds: 5000 / 7500 rpm Max. Tool Diameter for Spindle Moulder Max. tool diameter: 160 mm Max. tenoning diameter: 200 mm Circular Saw Unit Rip length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of the saw blade: 1200 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. saw blade projection at 90°: 67 mm Max. saw blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Equipment Anodised aluminium sliding table Crosscut frame with angle-adjustable length stop, flip stop, and degree scale Rip fence Eccentric clamp Table extension Milling fence with wooden jaws Manual spindle height adjustment Manual saw blade height adjustment Manual saw blade tilt adjustment

Kondisi: baru, Tahun pembuatan: 2024, daya: 1,2 kW (1,63 hp), EN_SCHORR_Electric_Stacker_RR15HH450E_Free_Lift SCHORR ELECTRIC HIGH-LIFT STACKER PRO 1500KG LOAD CAPACITY 5M LIFT HEIGHT RR15HH450E FREE LIFT Powerful professional-grade equipment with a lifting capacity of up to 1500 kg ✅ Reaches a lift height of 5 m ✅ Free lift: Mast only extends above mast frame height—ideal for low ceiling applications ✅ Robust triplex mast & heavy-duty chassis ✅ On-board charger included ✅ Equipped with high-performance 24V 200Ah lead-acid batteries ✅ Digital battery status indicator & hour meter ✅ Small turning radius of only 1,575 mm—ideal for confined workspaces EQUIPMENT / FEATURES Robust and high-quality design Thanks to its rugged and stable construction, the stacker ensures maximum stability and durability. With a capacity of 1,500 kg, this stacker is a real powerhouse, capable of smoothly raising heavy loads to a height of 5 metres. Free lift feature: Featuring a full free lift function, this stacker is especially suitable for warehouses and areas with low ceilings and restricted access height. The triplex mast only extends above the mast frame (1,570 mm), ensuring safe and efficient operation in tight spaces. Combined with a 5 m lift height, this unit is an all-round solution. Charger included: The integrated 24V lead-acid battery with a capacity of 200Ah ensures long operating times. The electric stacker can be recharged via the supplied charger using any standard 230V socket. Easy operation: The stacker is user-friendly and features a high-quality, waterproof control interface, allowing for short-term use in damp or cool areas. All controls—including the battery status indicator, emergency stop, and key switch—are ergonomically arranged for direct operator access. With a compact turning radius of just 1,575 mm, this electric stacker is extremely agile and highly maneuverable. Multiple driving modes: Thanks to various driving modes, the SCHORR stacker is extremely versatile and easily adapts to user requirements. In addition to a standard transport speed of approx. 5.8 km/h, it offers a "creep mode" for slow, precise movements—ideal for navigating narrow aisles and racking. Technical Data Manufacturer (Abbreviation): SCHORR Model Code: RR15HHE Free Lift Rated capacity: 1.5 t Model: 500E Weight incl. battery: 1,155 kg Drive: Electric Tyres: Polyurethane Dimensions Overall length: 1,975 mm Overall width: 820 mm Length incl. fork back: 905 mm Lift height: 5,000 mm Free lift: 1,740 mm Mast height (retracted): 2,214 mm Mast height (extended): 5,510 mm Fork dimensions DIN ISO 2331: 60 mm x 170 mm x 1,150 mm Fork outside spread: 570 mm Working aisle width (pallet 800x1200 longitudinal): 2,450 mm Turning radius: 1,575 mm Performance Drive speed, laden/unladen: 5.8 km/h / 6.0 km/h Lifting speed, laden/unladen: 0.09 m/s / 0.16 m/s Lowering speed, laden/unladen: 0.15 m/s / 0.16 m/s Hjdpfsqwdltsx Agqonk Max. gradeability, laden/unladen: 6% / 15% Do you prefer to finance or lease this equipment? No problem! We also offer attractive options for financing and leasing. Contact us for more information—we look forward to your inquiry!