Pelat penjepit dengan slot T.

Stahl 1500/200/H40 mm

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Hodpekfp D Tefx Aanjnl Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.

Kondisi: bekas, en-GB-001 Hnjdpfx Aaeu N Ez Donel

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Grinding diameter min/max, mounting: Ø 200 x 32 mm Hjdsu Ng Ncepfx Aanonl Spindle speed: 3000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions approx. (LxWxH): 0.7 x 0.9 x 1.6 m The grinding spindle is equipped with two hand levers: Left working area = Manual grinding device for small shank drills, current grinding wheel Ø 120 x 30 mm; mounting Ø 32 mm; speed 3000 rpm; with grinding rest Right working area = Swivel device for tapered shank drills; cup grinding wheel currently Ø 160 x 30 mm; mounting Ø 32 mm; speed 3000 rpm Cutting angle for 2-fluted drills max 180°, for 3-fluted drills 120° Relief angle 5° - 9°; drill diameter 8 - 40 mm, possible grinding types e.g.: standard grinding, cross-point (DK) grinding, centering grinding, spiral grinding, step drill grinding Machine lighting available *

Kondisi: bekas, Tahun pembuatan: 2017, Emcomat E300 untuk dijual. Mesin tahun pembuatan 2017. Hjdpfxjw I S Uuo Aanenl Tipe mesin: EM300x1500 SIEM Tahun pembuatan: 2017 Perbaikan telah dilakukan sebagian dan kekurangan berikut diketahui: Geometri telah diperiksa. Pemandu Z di area spindle utama (catok) "sedikit" aus. Turret alat telah diperiksa dan disetel. Sabuk sumbu X telah diganti dan titik nol mesin telah disetel. Pemandu Z di area catok sedikit aus. Pelumasan sabuk otomatis – kehilangan oli – pencarian kesalahan – masalah telah diatasi, saluran oli pelumas diganti. 100% berfungsi. Muat gratis. Tersedia segera. Lokasi – 8740 Zeltweg – Austria.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, en-GB_Haaf_LZ185_Detail_2024-06-17 Hodjw Svtcjpfx Aansnl

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 435 mm, lubang spindel: 70 mm, panjang pembubutan: 1.500 mm, diameter pembubutan: 640 mm, lebar di tengah: 1.500 mm, diameter pembubutan di atas alas geser: 640 mm, diameter ayun di atas peluncur silang: 435 mm, gores kuas bulu: 190 mm, diameter quill: 100 mm, jarak gerak quill: 190 mm, tinggi pusat: 320 mm, gerak cepat sumbu X: 5 m/menit, pergerakan cepat sumbu Z: 5 m/menit, diameter ayun di atas peluncur melintang: 640 mm, kecepatan spindel (min.): 3 rpm, kecepatan spindel (maks.): 2.500 rpm, panjang pemakanan sumbu X: 365 mm, panjang umpan sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, lebar tempat tidur: 1.800 mm, berat benda kerja (maks.): 1.600 kg, jenis arus masuk: AC (pendingin udara), jarak pergerakan landasan silang: 365 mm, kecepatan rotasi (min.): 3 rpm, kecepatan rotasi (maks.): 2.500 rpm, diameter chuck tiga rahang: 315 mm, torsi: 640 Nm, jarak pergerakan sumbu X: 365 mm, jarak gerak sumbu Z: 1.500 mm, berat benda kerja di antara senter: 1.600 g, diameter spindel: 100 mm, diameter benda kerja antara pusat: 640 mm, jarak antara pusat: 1.500 mm, panjang benda kerja di antara senter: 1.500 mm, diameter luar chuck: 315 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide/top slide: 365 mm / 145 mm Centre height over flat bed: 320 mm Distance between centres: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Tool post cross-section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (total): 3–2,500 rpm Gear stages: 2 Hjdpfx Aewywxdoanonl Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed speed transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Thread pitches metric: 0.1–400 mm Quill Ø / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Tailstock centre diameter: Ø 150 mm Workpiece weight (max.): Between centres, unsupported: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4″ colour LCD, display includes speed, feed, position, tool, and load information

Kondisi: baru, Z-MaT CNC/Cycle Lathe FTL660-2000mm, Control: Siemens 828D Shop Turn, 15" Touchscreen Flat-bed with linear roller guides and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing diameter over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Hnjdpfx Aswwt Troansl Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tool System 12-station servo turret Tailstock Hydraulic tailstock MK5 Quill travel: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z rapid traverse: 15/15 m/min Bed type/Guideways: Box bed/Linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be exhibited at EMO, Hall 12/D10, and will be available for immediate delivery afterwards. Further sizes of this series available – see PDF for details.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1981, Drill diameter 50 mm Total power requirement 2.2 kW Machine weight approx. 0.6 t 1 Drill bit grinding machine KLINGEL Type BSA 50 Year of manufacture 1981 Drill diameter 3 - 50 mm Hnjdpowu Hklofx Aanel Point angle 50 degrees Point angle 50 - 180 degrees Drive power 2.2 kW Weight 600 kg Electrical diagrams available – operating manual not included.

Kondisi: siap digunakan (bekas), de-01 Hnodpoxr Nvijfx Aanol

Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center distance: 2000mm, bed width: 370mm, spindle speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical issue at the tool head. Documentation available. An on-site inspection is possible. Hnodpev Amrtjfx Aanel