Katrol rantai elektrik, kerekan listrik, crane 2000 kg, katrol rantai, crane listrik, katrol rantai

STAHL T510-8 / 2.0 2/1

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm Kdjdpog U Uv Refx Acien -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Bandsawing machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Article No.: 3690041 Condition: New machine Kodpfx Aeilg Hdjcijdn Cutting range (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features: - Fully hydraulic, semi-automatic design: Upon start, the machine clamps automatically; after cutting, it returns to the home position, stops the saw blade, and opens the vice. - Cut sensor for automatic material height detection - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Swarf removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole, 100 - 200 mm Plate diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Kjdjhua Dqspfx Acisdn Tilted height: min. 0.40 m, max. 1.0 m Rotational speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Tahun pembuatan: 2009, Kondisi: baik (bekas), nomor mesin/kendaraan: 120P1109, OFFER 21407 Motorized Container - Vessel Rotator with Rail-mounted Carriage Technical Data: - Total load capacity (driven + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Roller support centers adjustable via trapezoidal threaded spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with dual-sided drive - Infinitely variable rotation speed - Hand-held remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Space requirement for driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight of driven unit: approx. 2,500 kg Kdedpjhcnhmjfx Acion - Weight of idler unit: approx. 1,800 kg

Tahun pembuatan: 1991, Kondisi: baik (bekas), nomor mesin/kendaraan: 44070/91-180102,

Kondisi: baru, Model designation Kedpfx Acogvquwoiedn Shark 332-1 CCS

Kondisi: bekas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtain-sided low-bed trailer, heavy-duty trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Deck height: 840 mm Loading height under curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (can also be used with the curtain frame removed and the tarpaulin pushed forward) - Spare wheel mounted at front bulkhead - Separate lifting and lowering of front and rear axles - Middle axle designed as lift axle Kedpfet N Antex Acisdn - Towing drawbar – telescopic, multi-stage extension - Extremely robust lashing eyes on the outer frame and in vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is from first ownership. The trailer has been de-registered since 2025.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Product description: Cormak 2-ton Gantry Crane is a specialized industrial machine designed for moving heavy loads within industrial halls. It consists of various components, including a load-bearing frame, trolley, and other elements that enable easy, safe, and precise horizontal movement as well as lifting and lowering of loads using hooks. This model is distinguished above all by its durability and stable construction, allowing it to be used in demanding industrial environments. The crane is also torsion-resistant, thanks to additional reinforcements incorporated in the design. One of the key features of the crane is its four guide rollers, which enable smooth transport of heavy loads. These rollers are exceptionally robust and abrasion-resistant, ensuring long service life. Another important element is the integrated parking brakes, which guarantee safe stoppage of the crane at any position. Height adjustment on the device is straightforward and safe when unloaded, with each support secured by two locking screws. The crane’s structure is sturdy and stable, and operational simplicity makes it an ideal choice for companies requiring an efficient and reliable machine for handling heavy loads. Furthermore, a variety of configurable options allows the crane to meet an even wider range of applications and tasks across different industrial sectors. With its performance and precision, this gantry crane is a versatile work tool that can be optionally equipped with wire rope or chain hoists. When used with a pulley, the crane with a winch or chain enables even more accurate and efficient handling of heavy loads. As a result, it is widely used in industries such as construction, metallurgy, and the chemical sector. The gantry crane facilitates storage, assembly, loading, and unloading operations as well as repair work. All these tasks are performed with a high degree of accuracy and safety, which translates to an improved quality of work. Technical specifications: Capacity: 2,000 kg Double T-beam: 100 x 180 mm Ksdpfsridh Nex Acijdn Height: 2,400 mm – 3,600 mm Width: 2,360 mm Weight: 168 kg Crane supplied without the hoist visible in the photos.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), air-cooled process chiller: refrigerant R32 Cooling capacity: 72 kW at 7/12°C, integrated P3 pump, built-in 410 l tank, winter package for outdoor installation down to -25°C ambient temperature includes speed-controlled fans Large Dixell display with protective cover, Kjdpfx Acsf H A Eyjiodn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Kdjdpjd Anz Rofx Acien Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 - 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction