Troli perkakas dengan aksesori

STAHLGRUPPE

Kondisi: sangat baik (bekas), Viessmann Vertomax 285 kW gas condensing boiler Ndjdpoigql Defx Aahef

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH STANDARD™ is a compact device for regenerating diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. The device comes with adapters that allow connection to all passenger car DPF filters. To further increase regeneration efficiency, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a special offer price. TECHNICAL DATA: - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum output: 6 kW - Frequency: 50 Hz - Adjustable fluid temperature: 30°C to 100°C - Pump performance: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency stop switch Ndsdpfx Aasgllxgshef - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature controller - Programmable automatic cycle controller - 150-liter water tank - Water pump with capacity up to 133 L/min - Built-in pressure regulator (0-8 bar) - Integrated filtration system - Adapters for DPF filters When you purchase our machine, you receive a starter package to help you get started right away. The package includes: - A set of 3 filter cartridges + 3 replacement filters - XPOWER DPF Cleaner chemical kit (2 x 1 L)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Ekstruder dan screw press minyak untuk pengolahan kedelai, memperoleh minyak dan bungkil kedelai. Terdapat dua ekstruder dan dua press. Satu ekstruder dan satu press bekerja bersama membentuk satu lini pengepresan. Daya motor press adalah 22 kW dan ekstruder 55 kW. Kapasitas satu lini adalah 500–800 kg/jam. Harga mengacu untuk satu lini (ekstruder + press). Ndjdstxinaopfx Aahjf

Kondisi: siap digunakan (bekas), A compact sweeper Hako with 2 disc brushes and central suction is available. Axle loads front/rear: 1200kg/1500kg, turning radius: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, travel speed forward/reverse: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions L/W/H: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection possible. Njdpswaa Hqofx Aahjdf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 3 h, Nock CB 709 slicer with product return without offloading conveyor belt. The maximum product height for meat with this machine is up to 120 mm. The machine is available immediately. Ndedperw Agpefx Aahsf

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), Used steam boiler Manufacturer: LOOS Year of manufacture: 1996 Steam capacity: 500 kg/h Weishaupt gas burner G3/1-E Type: ZD-NA Output: 80-550 kW Year: 1996 Nedpfoiz S Suox Aahedf Weishaupt burners available in multiple versions We speak Russian! Viewing strictly by prior telephone arrangement! Preferred sale to dealers, commercial customers or for export. All information without guarantee, errors and prior sale excepted. The seller assumes no liability for typing or data transmission errors. We are happy to buy your used boiler or burner! Of course, we take care of all formalities. Loading possible.

Kondisi: baru, Dimensions (L x W x H): 960 x 460 x 860 mm Weight: 75 kg Number of drawers: 8 pcs. Tool trolley with 8 drawers, all equipped with tools. - The pull-out drawers are all ball-bearing mounted. - The entire workshop trolley is lockable. - The workshop trolley is equipped with 4 sturdy wheels, 2 of which are steerable and lockable. - The included tools are made of chrome vanadium steel. - The workshop trolley features 4 robust wheels: 2 steering and 2 locking, ensuring very comfortable maneuverability. On top of the tool trolley is a durable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in styrofoam/foam inserts. Drawer 1: - 1/4'' drive: 13 sockets ranging from 4 mm to 14 mm, 11 deep sockets from 4 mm to 13 mm Ratchet, universal joint, extension. - 3/8'' drive: 10 sockets from 10 mm to 19 mm, 11 deep sockets from 6 mm to 19 mm Ratchet, universal joint, extension. - 1/2'' drive: 17 sockets from 8 mm to 32 mm, 9 deep sockets from 10 mm to 22 mm Ratchet, universal joint, extension. Drawer 2: - Accessories for 1/4'' ratchet: Torx sockets without hole: T8, T9, T10, T15, T20, T25, T27, T30, T40 Torx sockets with hole: TT8, TT9, TT10, TT15, TT20, TT25, TT27, TT30, TT40. Allen key sockets: H3 to H8 Slotted sockets: SL4 to SL7 Crosshead sockets: PZ0 to PZ3, PH0 to PH3 Multi-spline sockets: M8, M10, M12 Five-star sockets: TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories for 3/8'' ratchet: Bit adapter Torx sockets without hole: T40, T45, T50, T55, T60, T70 Torx sockets with hole: TT40, TT45, TT50, TT55, TT60, TT70 Allen key sockets: H7, H8, H10, H12, H14 Slotted sockets: SL8, SL10, SL12 Crosshead sockets: PZ3, PZ4; PH4, PH8 - Accessories for 1/2'' ratchet: Allen key sockets: H14, H17, H19, H22, H24; H5, H10, H11, H13 Torx sockets: T40, T45, T50, T55, T60, T70, T80 Ribe: R9, R10; multi-spline: M16 Multi-spline sockets: M9, M10, M12, M14, M16, M18 Short, medium, and long adapters Torx: T30, T45, T50; Allen H7 Drawer 3: - Ratchet combination spanners 8-9-10-11-12-13-14-15-16-17-19-22mm - Double ring spanner set, 8-piece: 6x7mm, 8x9mm, 10x11mm, 12x13mm, 14x15mm, 16x17mm, 18x19mm, 20x22mm - Torque wrench Drawer 4: - Precision screwdrivers: Slotted: SL3.0 x 100mm; Phillips: PH0 x 100mm - Screwdrivers with soft-grip handles and external hex: Slotted: SL6 x 38mm; SL5 x 75mm; SL6 x 100mm; SL8 x 150mm Phillips: PH2 x 38mm; PH1 x 75mm; PH2 x 100mm; PH3 x 150mm - Torx screwdrivers: T6 x 80; T7 x 80; T8 x 80; T9 x 80; T10 x 80; T15 x 100; T20 x 100; T25 x 100; T27 x 100; T30 x 100; T40 x 150 Drawer 5: - T-handle hex/Allen key set with ball end: 3 x 115mm; 4 x 120mm; 5 x 140mm; 6 x 160mm; 7 x 170mm; 8 x 175mm; 10 x 200mm - T-handle Torx: T10 – T40 Drawer 6: - Circlip pliers set, internal/external, 4 pcs. (2 bent, 2 straight) - Plier set: combination pliers, side cutters, straight needle nose pliers, bent needle nose pliers, pipe wrench - Framing hammer Drawer 7: - Nut drivers: 6, 7, 8, 10, 11, 12, 13, 14mm Nsdpju Impysfx Aahjdf Drawer 8: - Bodywork tools

Kondisi: sangat baik (bekas), daya: 1.700 kW (2.311,35 hp), The offer concerns the following LOOS steam boilers: LOOS U-ND 350 Steam Boiler. Specifications: - Operating pressure: 1 bar - Boiler control cabinet Ndjdpfx Aaeuhm Erohef - Oil burner - Feed water pump LOOS U-HD 800 Steam Boiler. Specifications: - Operating pressure: 10 bar - Boiler control cabinet - Weishaupt dual-fuel (gas/oil) burner - Grundfos CR feed water pump - Safety valve - Feedwater tank - Chemical dosing tank with dosing pump LOOS U-HD 1250 Steam Boiler. Specifications: - Operating pressure: 16 bar - Control cabinet - Weishaupt dual-fuel (gas/oil) burner - Grundfos feed water pump

Kondisi: bekas, The subject of the sale is two WIMA steam generators: WIMA 500 and WIMA 400. WIMA 500 Steam Generator (visible in the photos) - specifications: Steam output: 500 kg Operating pressure: 10 bar Burner: heating oil Nedpouabwgsfx Aahsdf Feed pump: Speck WIMA 400 Steam Generator - specifications: Steam output: 400 kg Operating pressure: 10 bar Burner: heating oil Feed pump: Speck

Kondisi: baru, Centre distance ----- 750 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Motor power ----- 1.1 kW INCLUDES * 2-axis digital readout SINO * Delta frequency inverter * Automatic longitudinal and cross feed * Thread cutting dial * 3-jaw chuck 125 mm Ndsdoq E Ra Iepfx Aahof * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Follow rest * Subplate * Rear panel * Box with various tools Option * Stand cabinet