Mesin bubut mekanik

STANKO 1A64

Kondisi: bekas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine no. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Nominal arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Power supply: 380 Volt, 50 Hz, 15 kW - Clockwise/counterclockwise rotation of the drilling spindle via hand lever switch Bdedpfx Apjlhwr Rjcod - Hydraulic gear shifting for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, Kami menjual mesin bubut ini. Mesin terhubung listrik, dapat diuji coba. Aksesori tersedia bersama mesin. Diameter pembubutan: 2.000 mm. Panjang pembubutan: 10.000 mm. Berat benda kerja (maks.): 60.000 kg. Diameter pemesinan: 2.000 mm. Video mesin dapat dikirim melalui WhatsApp. Bsdpfx Asxwmbmepcsdd

Kondisi: bekas, Swing diameter over bed 540 mm Maximum swing diameter over cross slide 370 mm Distance between centers 3000 mm Center height 270 mm Turning diameter in gap 815 mm Bedpjxnqzxefx Apcedd Bed width 344 mm Spindle bore 88 mm Spindle diameter at front bearing 133 mm Spindle mount 11" D1 Camlock Speed range 18-1400 rpm Number of spindle speeds 16 3-jaw chuck Röhm Ø 315 mm Longitudinal feeds: 0.06-1.0 mm/rev Cross feeds: 0.03-0.5 mm/rev Metric threads 0.4-14 mm Inch threads 2-72 TPI Thread - module 0.3-3.5 mm Thread - DP 8-60 pitch Tailstock quill diameter 75 mm Quill stroke 230 mm Quill taper MK 5 Cross slide travel 280 mm Top slide travel 150 mm Machine dimensions approx. 4700 x 1100 x 1400 mm Weight approx. 3200 kg Motor power 9.4 kW Accessories: - 2-axis digital readout Fagor - Röhm wedge bar chuck Ø 315 mm incl. hard master jaws and hard top jaws - Multifix toolpost size C incl. 6 change cassettes - Live center - Chuck guard (switchable) - 2 steady rests - Chip guard/rear splash guard - Coolant system - Work lamp Guideways in good condition, no scoring, not worn The machine is in overall good condition, with age-related signs of use. Operating manual included.

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, Bsdpfx Aot Hwucspcedd extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: bekas, Tahun pembuatan: 1984, diameter putar di atas sled silang: 1.600 mm, diameter pembubutan: 2.000 mm, diameter pembubutan di atas alas geser: 2.000 mm, panjang pembubutan: 35.000 mm, berat benda kerja (maks.): 63.000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem design on a single bed: left headstock + right headstock Double mirror tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires servicing/replacement Motorized tailstock on each side (left and right) 3-bedway construction Torque at chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Areas of application: - Shipyards - Propeller shafts - Hydraulic cylinder shafts - Camshafts - Defense & Aeronautics - Rolls and shafts for steel mills - Crankshafts Specifications Metric / US Standard Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over cross slide: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Spindle speed: 180 rpm Feed rate X-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Bdedpfeynky Asx Apcjd Weight: 158,000 kg Please note: The information provided here is given to the best of our knowledge and, where possible, sourced from the manufacturer. While the information is presented in good faith, accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 1.300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, rentang pivot: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle stock horizontal): 1,300 mm Control • CNC Control: Heidenhain iTNC 530 Feed Rate • X, Y and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head, Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Temporarily 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the Company MBM Bodpfjxgq Aysx Apcodd MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer support, machine overhauls, as well as control retrofits. Services: - Used machinery - Spare parts - Customer service - Machine servicing - Machine overhauls - Control retrofitting ----- _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used fraesmaschine – used CNC milling machine – used drill milling machine – used metal milling machine – used metal mill – used metal milling machine – used CNC mill – CNC fraesmaschinen – CNC milling machines – milling machine – large part machining – CNC large part machining – milling – SHW – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column milling machine

Tahun pembuatan: 2007, Kondisi: bekas, verzahnung-001 Bdjdpjw Rf S Eefx Apced

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Feed Drive via DC Motor Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat. Bdedpfjtqf Rzsx Apcsd

Kondisi: baik (bekas), FEATURES Bdoder I Aykopfx Apcjd Table diameter ⌀: 3,200 mm Maximum turning/swing diameter ⌀ - With forward ram: 3,300 mm - With retracted ram: 5,600 mm Minimum turning/swing diameter ⌀ - With forward ram: 800 mm - With retracted ram: 3,100 mm Maximum turning height: 750 mm Control system: FAGOR 8025 Spindle speeds (2 ranges): - 0.5 – 10 rpm - 10 – 40 rpm Main motor power: 80 HP Maximum table load: 30,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 3.000 h, jarak pergerakan sumbu X: 6.100 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 950 mm, CNC-Fräsmaschine mit Fahrständer – Komplett modernisiert durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten vollständig auf den neuesten Stand gebracht mit moderner Heidenhain TNC 320 Steuerung. Sofort einsatzbereit für die Produktion. HAUPTDATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsweg des Schlittens): 950 mm Bdodpfx Apjn D N H Tscjd • Doppelfräskopf | Kopfdrehung: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spannungsfreigabe) • Kopfmaße: 290 × 290 mm • Spindelantriebsleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 IHRE VORTEILE BEI REM: ✔ Maschine vollständig geprüft und im Einsatz getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Attraktive Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie und Schwerindustrie. Fordern Sie jetzt die vollständigen technischen Daten, Fotos und ein Vorführvideo an.