Kopling rem untuk KD2128 STANKOIMPORT

STANKOIMPORT KD2124, KD2128, H3222A

Tahun pembuatan: 1984, Kondisi: siap digunakan (bekas), Rafamet UBB 112/2 Raddurchmesser min. 700 mm Raddurchmesser max. 1120 mm Spannlänge 540 – 1050 mm Radsatz-Achslänge min. 1640 mm Kjdpfehvml Isx Aa Nsdg Radsatz-Achslänge max. 2800 mm Maximale Reifenbreite 150 mm Maximales Radsatzgewicht 4000 kg Schlittenverstellgeschwindigkeit 2000 mm/min Maximaler Schlittenvorschub 2000 mm/min Antriebsleistung Hauptmotor 80 kW Gewicht ca. 40.000 kg

Kondisi: baik (bekas), diameter penggilingan: 1.600 mm, panjang penggilingan: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Kjdpfx Aaevvvw Es Njdg Convex and concave grinding 6 steady rests included 2 steady rests hydrostatic Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Approximate dimensions: Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, no representation or contractual terms will be constituted. We recommend verifying all critical details independently.

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Kdsdpfxekvnums Aa Neg Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation Ksdpfsvuuaiex Aa Njdg

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Kedpfxetzdyzj Aa Nedg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1974, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1276, CNC Schmiederadialpresse GFM SX-13 Baujahr: 1974 / 2022 (modernisiert) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hammer: 4 Schmiedekraft pro Hammer: 160 Tonnen Hammerhübe/min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundmaterial: Ø 130 mm Vierkantquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6820 mm Manipulator B max. Verfahrweg: 7150 mm Maximale Werkstücklänge: 6000 mm Eilgang Manipulator: 400 mm/sec Kdodpfjq U R T Nox Aa Njg Gesamtanschlussleistung: 300 kW, 380 V, 50 Hz Abmessungen: Schmiedehöhe über Fußboden: 615 mm Gesamthöhe der Maschine über Fußboden: 1665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Kdodpfshlnzkex Aa Nog

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Vertical Turning Lathe – Double Column / Make: SCHIESS BRIGHTON Model: Vertimaster / Year of Manufacture: 2009 The machine can be inspected by appointment. Condition: Fully functional / operational. TECHNICAL DATA: Work Area and Travel: - Max. machining / swing diameter: 9,000 mm - Max. machining height: 6,000 mm - Table diameter: 6,000 mm - Distance between columns: 8,300 mm - Main drive: 240 kW - Max. torque at the table: 250 kNm - Max. workpiece weight: 150 t Boring and Milling Unit: - Max. drive power: 63 kW - Spindle speeds: 0 - 2,500 rpm Kjdpfx Aajxgv Ego Nodg - Max. torque: 2,200 Nm Slide: - Cross-section: 520 x 420 mm - Minimum plunge diameter: 750 mm - Max. cutting force at 6 m diameter: 75 kN EQUIPMENT: - CNC Control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operator platform - Chip conveyor - Documentation - Additional high-quality equipment ... No guarantee for completeness or accuracy of the technical data and equipment. Subject to prior sale. A detailed technical data sheet and further information on equipment available upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, produsen pengendali: Heidenhain, model controller: Mill Plus, panjang meja: 700 mm, kecepatan spindel (maks.): 12.000 rpm, 60 tool stations. Kjdpfou S A Anex Aa Njdg 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar. Operating mode 4 for working with the door open. Blum laser for tool measurement and tool breakage control. Preparation for Blum 3D probe; probe not included in the scope of delivery.

Tahun pembuatan: 1980, Kondisi: bekas, Table length 2,000 mm Table width 1,800 mm Table load capacity 12.5 t Total power requirement 10 kW Machine weight approx. 7.5 t Space requirement approx. [to be completed] m Table size approx. 2,000 x 1,800 mm Maximum table load approx. 12,500 kg Table travel (longitudinal) 1,250 mm Table height above floor 920 mm Kdjdpet Hwq Refx Aa Nog Longitudinal feed rate 0.63 - 2,000 mm/min Rotary feed rate (based on 1,000 mm Ø) 1 - 3,150 mm/min Rapid traverse (longitudinal) 2,000 mm/min Rapid traverse (rotary, based on 1,000 mm Ø) 3,150 mm/min Machine weight 7,500 kg External dimensions (LxWxH) 3,700 x 2,100 x 920 mm Drive output total 10 kW - 380 V - 50 Hz Accessories / Special equipment - Steel telescopic covers for the guideways - Infinitely variable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and reading device Condition: satisfactory to good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We kindly ask you to review our offer. Please always enquire about your requirements for good used machines with us.