Mesin bubut tipe Swiss CNC

STAR Micronics SB-20 type C

Kondisi: bekas, We offer you the BOC Edwards Drystar GV600+EH4200 as a package deal. These units are only available together; we do not sell the GV600 or EH4200 separately. The pump set is pre-owned. If you are interested, simply send us a message and we will get back to you. Pgjderfw Rbepfx Aagsr

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace Pgjdjiryyaspfx Aagjr - As new: barely used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in vacuum Temperature control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of stabilization period Control voltage: 230 VAC / 24 VDC Usable chamber dimensions: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold furnace): < 5 * 10-5 mbar with clean, dry furnace Footprint: 900 x 1900 x 3000 mm Total weight: approx. 1500 kg Sound pressure level: < 70 dB We do not guarantee the accuracy, completeness, or currentness of the provided information.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 503 mm, diameter pembubutan: 190 mm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 135 mm, jarak gerak sumbu Z: 503 mm, daya motor spindle: 11.000 W, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 6 m/menit, pergerakan cepat sumbu Z: 40 m/menit, jenis arus masuk: tiga fasa, torsi: 75 Nm, berat keseluruhan: 6.200 kg, hidung spindel: A2-5, Bubut CNC NAKAMURA-TOME WT100 SPESIFIKASI TEKNIS: Tahun pembuatan: 2012 Kontrol CNC: FANUC 31i-B Jarak antar spindel: 735 mm Diameter pemotongan maksimum: 190 mm Panjang pembubutan maksimum: 503 mm Pergerakan sumbu Y: -31 / +31 mm Pergerakan sumbu Z1: 503 mm Pergerakan sumbu X1: 135 mm Pergerakan sumbu Z2: 503 mm Pergerakan sumbu X2: 135 mm Kecepatan rapid traverse sumbu X1: 16.000 mm/menit Kecepatan rapid traverse sumbu X2: 16.000 mm/menit Kecepatan rapid traverse sumbu Z1: 40.000 mm/menit Kecepatan rapid traverse sumbu Z2: 40.000 mm/menit Kecepatan rapid traverse sumbu Y: 6.000 mm/menit Nose spindle utama: A2-5" Diameter maksimal batang pada spindle: 42 mm Lubang tembus spindle: 56 mm Kecepatan putar maksimum spindle: 6.000 rpm Inkrementasi sumbu C: 0,001° Daya spindle: 11 kW Torsi spindle: 75,4 Nm Nose spindle kontra: A2-5" Lubang tembus spindle kontra: 56 mm Pergerakan spindle kontra: 525 mm Kecepatan putar maksimum spindle kontra: 6.000 rpm Inkrementasi spindle kontra sumbu C: 0,001° Daya spindle kontra: 11 kW Torsi spindle kontra: 75,4 Nm Ukuran maksimum dudukan pahat: 20 x 20 mm Jumlah stasiun alat - Turret 1: 12 Jumlah stasiun alat dengan penggerak - Turret 1: 12 Kecepatan maksimum alat berputar - Turret 1: 6.000 rpm Jumlah stasiun alat - Turret 2: 12 Jumlah stasiun alat dengan penggerak - Turret 2: 12 Kecepatan maksimum alat berputar - Turret 2: 6.000 rpm Daya alat berputar: 7,1 kW Daya total terpasang: 55,2 kVA Tegangan suplai: 400 V Berat: 6.200 Kg PERLENGKAPAN YANG TERMASUK: x1 IEMCA BOSS 545 E Type 32 L barfeeder (kapasitas batang 3 m) x1 Chuck collet SMW-AUTOBLOK Mario Pinto PPBE-42 A5 (spindle S1) x1 Chuck collet (spindle S2) x4 Dudukan alat berputar radial x2 Dudukan alat berputar aksial x16 Dudukan alat statis x1 Pedal kaki untuk buka/tutup chuck x1 Penangkap benda kerja pada turret atas dengan belt konveyor x1 Konveyor serbuk x1 Sistem pelumasan otomatis x1 Lampu indikator status tiga warna x1 Transformator x1 USB memory stick untuk backup parameter Mesin dapat dilihat dalam kondisi teraliri listrik di lokasi kami dengan perjanjian. Harga atas permintaan, biaya loading ke truk sudah termasuk. Pedpfezhvwljx Aagegr Pengiriman ke seluruh dunia tersedia. Informasi pada halaman ini diberikan sesuai kemampuan terbaik kami. Akurasinya tidak dapat dijamin sepenuhnya. Mesin perkakas ini sejenis dengan pusat bubut dan milling, machining center, dan mesin frais, termasuk merek seperti Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, dan Mazak. Bubut CNC, pusat pembubutan CNC, mesin turning CNC, machining center, mesin milling CNC, pusat pemesinan CNC, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), 10-2 Bar, Tahun produksi 2002 Pgedpfjykyqisx Aagor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jam operasional: 8 h, gaya penjepit: 100 kN, diameter sekrup: 18 mm, lebar total: 526 mm, tinggi total: 1.692 mm, berat keseluruhan: 450 kg, panjang produk (maks.): 1.485 mm, Hydraulic injection molding machine from 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It is equipped with an 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking for a high-quality injection molding machine, consider the BOY XS 161 that we are offering for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multitouch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm³ • Tie bar spacing: 160 mm (205 mm diagonal) • Max. daylight opening: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A Pgodsyw I Azjpfx Aagjr • Min. machine height: 1380 mm • Max. machine height: 1692 mm • Footprint: 0.78 m² • Safety enclosure: Fully enclosed clamping area with transparent polycarbonate sliding door and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connections on the non-operator side • Status indicators: 3-stage LED signal tower (Red/Yellow/Green) Optional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty transport/leveling wooden pallet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: Heidenhain, model controller: TNC 530 HSC, berat keseluruhan: 10.000 kg, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 3.000 h, pasokan pendingin: 40 batang, hidung spindel: HSK 63, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, konveyor serpihan, Pusat Pemesinan Universal 5 Sumbu DMG Deckel Maho DMU 60 EVO Tahun Pembuatan: 2014 Pengendali: Heidenhain TNC 530 HSCi Jam Operasi: 16.000 jam Jam Spindel: sekitar 3.000 jam - Spindel diperbarui pada tahun 2025 Data Teknis: Kecepatan Spindel: 10 - 18.000 rpm Daya Penggerak: Torsi Spindel: Pemasangan Alat: HSK 63 Jumlah Slot Majalah: 60 Tekanan Pendingin melalui Spindel - IKZ: 40 bar Rentang Pergerakan: Sumbu X: 600mm Psdpfjzut Injx Aagjgr Sumbu Y: 500mm Sumbu Z: 500mm Sumbu A: -10 / +110° Sumbu B: 0,001° Aksesori: - Sistem Pendingin Knoll 40 bar dengan filter pita kertas - Pendingin Oli Spindel - Konveyor Serpihan - Probe 3D - Blum Laser

Kondisi: bekas, Tahun pembuatan: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm Control unit: Num 1020 GC Pgodpfx Aaou Ngyzjger Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding processes - In plunge-cut mode the maximum plunge length is 160 mm. - Workpiece discharge is automatic via rail (the function and operation of which is not known to WMW AG) - Main grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, entry angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system Condition: Reference run not possible The machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request

Kondisi: baik (bekas), Tahun pembuatan: 2004, Peripheral devices Brand: Tool - Temp Pgsdpfeh Hbpwjx Aagsr Type: TT - 157E Available: 14 units

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis Travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2-axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2-axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and Sub Spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: infinitely variable / infinitely variable Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Draw tube bore: 66 mm / 52 mm C Axes: Smallest input increment: 0.001° Smallest command increment: 0.001° Max. indexing speed: 600 rpm Feed rate: 1–4800 mm/min C-axis clamping: disc brake C-axis positioning time: 1.5 s Upper/Lower Turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Tool size square: 25 mm Tool size round shank: 32 mm Driven tools: Drive system: individual drive Spindle speed: 6000 rpm / 3600 rpm Speed range: infinitely variable Number of tool stations: 12 × 2 Podpfxsy Ipp Ro Aagegr Collet size: ER32 Tool holder capacity straight: 2 mm – 20 mm Tool holder capacity cross: 2 mm – 20 mm Drive Power and Torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Floor space required: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as per photo documentation includes, among others: Nakamura lathe, tool holders (driven and static), collets, complete machine documentation, gantry loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is provided for the correctness, completeness, or timeliness of the information provided.