Perangkat penjepit

STARK Nullpunktspannsystem Set

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 1,500 mm Y travel: 1,000 mm Z travel: 1,000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4,000 / stepless rpm Tool holder horiz./vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1,000 Nm Swiveling spindle head left and right: 90° Feed rate: 1 - 6,000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping table surface L x W: 1,600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. LxWxH: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. LxWxH: approx. 38.5 m² Hedpfx Asu Nc Riokgsfn Applications: Milling, drilling, tapping, boring with direct encoded linear measurement systems The guides of all 3 axes are flat guideways Milling head position controlled +/-90° ICS (internal coolant supply) and external cooling Milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar working pressure with coolant unit, high-pressure pump 60 bar (internal cooling), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external cooling), as well as spray gun Compact band filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: Hfjdpfx Aksr A Hcbjgon • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Hjdpfx Akowpud Ajgsfn Specifications Metric | Imperial Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, produsen pengendali: MAZATROL, model controller: MATRIX, Mesin bubut horizontal Mazak QTN 250 M X 1000 3-sumbu ini diproduksi pada tahun 2010. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan Mazak QTN 250 M X 1000 yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keuntungan teknis mesin • Kapasitas maksimum: 640 • Kecepatan rapid traverse sumbu X: 36.000 / sumbu Z: 36.000 / sumbu C: 555 • Diameter benda kerja maksimal: 380 • Panjang benda kerja maksimal: 600 • Kapasitas bar: 76 • Dimensi self-centering (spindel utama): 250 • Stroke: 1000 / cone: CM 4 • Tangki pendingin: 300 l Hfsdpfx Akeyalpcegon

Kondisi: bekas, Tahun pembuatan: 1968, Roll diameter 500 mm Throat depth 1050 / 485 mm Workpiece height 300 mm Saw blade length 3920 - 4050 mm Cutting speed 15 - 940 m/min Hodpfx Ajiqp Erjkgsfn Table height 1040 mm Table surface 750 x 800 mm Table tilt 15 degrees Total power requirement 4.0 kW Machine weight approx. 1750 kg Space requirements approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre setting via lockable indexing every 15° - Adjustable saw blade for optimal entry angle - Hydraulic vice on both sides - Electronic blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating linear guides - Additional table 450 x 450 mm - Machine lamp

Kondisi: baru, translation-001 Hedpfxegxi D Ts Akgjfn

Kondisi: siap digunakan (bekas), Width: 1000 mm Length: 1500 mm Hfjdpfx Akjgq Nawjgon Plate height: 195 mm Foot height (adjustable feet): 600 mm Total height / working height: approx. 800 mm Weight:

Kondisi: bekas, Tahun pembuatan: 2008, x-Weg 400 mm y-Weg 300 mm z-Weg 400 mm Spindelaufnahme ISO 40 Spindeldrehzahlen 40 - 2.000 U/min Tischgröße 750 x 320 mm Vorschübe stufenlos 10 - 380 mm/min Eilgang 1.200 mm/min Antriebsleistung 2,2 kW Pinolenhub 80 mm Betriebsspannung 400 V Gesamtleistungsbedarf 4,7 kW Maschinengewicht ca. 1,1 t Raumbedarf ca. 1,15 x 1,40 x 1,85 m Hodpfoxa Hf Rsx Akgjfn - Fabrik-Nr.: 148373 - 3-Achsen-Digitalanzeige - horiz. Fräseinrichtung - Fräskopf schwenkbar ±45° - Kühlmitteleinrichtung

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm Hfedpfx Aju Et Nbskgsn - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: baik (bekas), NHH lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Hfsdpfx Akeqgdkiegen Dimensions: 150x85x155 cm (LxWxH)