Mesin pengukur

STIEFELMAYER

Kondisi: bekas, STIEFELMAYER measuring machine with manually guided measuring arm Measuring and marking-out plate, heavy-duty steel/cast iron, heavily ribbed High-precision measuring plate with high-quality surface Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Nsdpfxopwpxcj Abwolc Working height: approx. 800 mm - With manually moveable measuring arm, measuring range X = 1490 mm, Y = 1000 mm, Z = 1250 mm - With 3-axis digital readout Grundig MZ 1030 - Machined side surface at 90° angle to table surface, 2000 x 350 mm - 5 height-adjustable leveling feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg Good condition

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany Nlsdjh Ek Dajpfx Abwec - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: baik (bekas), Marble plate STIEFELMAYER Length: 3000 mm Nedpfxszg Hf De Abwslc Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 Weight: approx. 4 t Previously used as a coordinate measuring plate. Two identical marble plates available.

Tahun pembuatan: 1986, Kondisi: bekas, Manual measuring and marking machine S T I E F E L M A Y E R Type System C - 160 Travel (axes): - X-axis travel: 2,400 mm - Y-axis travel: 1,600 mm - Z-axis travel: 1,800 mm Power requirement: kW Machine weight approx.: 3,300 kg Space requirement approx.: m Year of manufacture: 1986/1999 Measuring stand No.: 2429 08 85 Working area: - X-axis (horizontal): approx. 2,400 mm - Y-axis (cross): approx. 1,600 mm - Z-axis (vertical): approx. 1,800 mm Table size: 3,000 x 2,000 x 360 mm Table height above floor: 700 mm Table thickness: approx. 360 mm Machine height assembled: 2,800 mm Weight: approx. 3,300 kg Special equipment / accessories: • Measuring table split into 2 halves: 1,500 x 2,000 mm each • Side-mounted measuring slide system C with cross section 160 x 160 mm and 80 x 80 mm for Y measuring arm • Lateral ruler stops approx. 2,200 mm long • Installed measuring counter type MZ 2000 with digital display, network connection, and RS-232 interface, including all functions for model making • 10 height-adjustable leveling feet Nodpfxst Hwxnj Abwelc • Extensive accessories for marking and measuring • Including RENISHAW probe Condition: Good to very good – available from stock, under power Delivery: Ex stock – as inspected Payment: Net payment – upon receipt of invoice We look forward to receiving your order. Additionally, we have other measuring machines and plates in various sizes in stock. Please feel free to inquire.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.304 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Nljdpoxx Tigefx Abwsc Hydraulically adjustable support legs Splash protection (inner and side fenders) Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for intake roller and scraper floor (twin drive) Fuel tank 2 x 450 liters Intake roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged lubrication bars Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is off 24-V electrical control system Separate control box at rear of machine Hydraulically folding fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including one-piece rear flap Rear conveyor: Belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, includes antimagnetic centre section Underside conveyor: Belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at feed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL 2011 deep orange Additional Equipment: Hydrostatic travel drive Scraper floor chain lubrication NEODYMIUM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: engine compartment and rear conveyor Spraying system Delivery date to be agreed Available from 06/2026

Tahun pembuatan: 1987, Kondisi: bekas, x-travel 2800 mm y-travel 800 mm z-travel 1300 mm Machine weight approx. 3 t STIEFELMAYER Manually Operated 3D Measuring and Marking Machine Type: System C-100 Year of manufacture: 1987 Measuring stand No. 314 710 87 Working area: X-axis (horizontal) approx. 2,800 mm Y-axis (crosswise) approx. 800 mm Z-axis (vertical) approx. 1,300 mm Table size: 3,500 x 1,000 x 360 mm Working height above floor: 750 mm Mounted rotary table, rotatable: 800 mm Cross sections of measuring carriage: 100 x 100 mm or 60 x 60 mm Table height above floor: 700 mm Table thickness approx.: 360 mm Overall height of the measuring machine: approx. 2,800 mm Weight approx.: 3,000 kg Special features / Accessories: • Side-mounted measuring carriage system C with cross-section 100 x 100 mm or 60 x 60 mm for Y-axis measuring arm • Mounted rotary table with vernier scale 0 – 360°, easily removable • Mounted MZ 2000 measuring counter as digital display with network connection and RS232 interface • 2 longitudinal rulers as workpiece stops, approx. 2,400 mm long • 6 height-adjustable leveling feet • Swiveling storage tray, extensive marking accessories • RENISHAW measuring probe Nlodpfxot Hw I Nj Abwsc Condition: Good – available immediately, connected to power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Additionally, we have other measuring machines and plates in various sizes in stock. Please contact us for further information.

Kondisi: sangat baik (bekas), External micrometer 275 - 300 mm Nlsdpfekn Enxex Abwec Manufacturer: Stiefelmayer Accessories: calibration rod, length 250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 093, berat keseluruhan: 30.000 kg, lebar transportasi: 2.500 mm,

Kondisi: bekas, Tahun pembuatan: 1978, nomor mesin/kendaraan: 27309654, x-travel: 1600 mm y-travel: 1000 mm z-travel: 1300 mm Base plate dimensions: 1,500 x 800 x 120 mm Working range Y-axis: 175–1210 mm Working range Z-axis: 0–810 mm Digital display: Grundig 3-axis digital readout Digital display dimensions: 235 x 80 x 130 mm Total power requirement: 0.04 kW Machine weight approx.: 2 t Space requirement approx.: 2.0 x 1.5 x 1.63 m Nljdpfx Ajcxxwrjbwoc - 3D coordinate measuring machine - Precision hand-scraped cast iron plates with 4 leveling feet, 2000 x 1500 mm - Includes approx. 20 different scribing and measuring probes - Equipped with Stiefelmayer guidance system "A"

Kondisi: bekas, Tahun pembuatan: 1983, nomor mesin/kendaraan: 16340283, Table length: 2000 mm Table width: 1000 mm Machine weight approx.: 2.9 t - Novalyth hard stone plate with integrated T-slot - Grundig MZ 1030 measuring computer - 5 height-adjustable feet Nljdpecxxziofx Abwoc

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Used T-slot clamping angle plate Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm Nodpsgwxmxefx Abwslc with - 7 horizontal T-slots used, in good condition

Kondisi: siap digunakan (bekas), de-001 Nljdpfx Ajud Il Sjbwec

Kondisi: baik (bekas), Tahun pembuatan: 2019, 3D Mesin Pengukur Koordinat STIEFELMAYER Futura CNC, No. 20190101F, Tahun Pembuatan 2019, Rentang Pengukuran 1.600 x 1.000 x 1.000 mm, dengan fungsi pemindaian, berbagai probe pengukuran, PC kontrol, 2 monitor output, perangkat multifungsi EPSON, meja kerja kantor, pemeriksaan berikutnya 01/2027. Njdpeyhql Ssfx Abwolc

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2013, Manufacturer: HSM Model: HL 4010 Li Nledpfour Ravsx Abwoc Year of manufacture: 2013 The equipment is incomplete and is being sold as parts. Defects: - Hydraulic pump missing - Control unit missing - Power supply missing

Kondisi: baik (bekas), Plate dimensions: 1500 x 4000 mm Nljdpjdzln Uofx Abwsc Plate height: 370 mm Top plate thickness: 50 mm Working height (assembled): 870 mm Weight: 6.8 t