Penumpuk pejalan kaki

Still EXV10 Batterie 2023!!!

Tahun pembuatan: 2026, Kondisi: baru, Electric Flow Pasteurizer – up to 400 l/h * Water bath kettle * Electric heating: 13.5 / 18 / 27 / 31.5 kW – 400 V Kedpfot Uzitex Al Aonb * 150 l stainless steel tank with thermal insulation * Stainless steel tube heat exchanger * Automatic low-temperature safety cut-off (compressed air required) * Stainless steel juice pump * Chassis with mount for temperature cut-off switch and pump ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer operation

Kondisi: bekas, Tahun pembuatan: 1991, Consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reducing station - Control cabinet with operator panel Machine (addition): Juice heating plant for pasteurisation Capacity: 100 hl/h Perm. operating overpressure PHE: 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Ksdpfx Aljvcqy Us Aenb Length: 5.6 m Width: 2 m Height: 2.4 m Operation/control: Control cabinet with operation buttons Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; plate heat exchanger; shell-and-tube heat exchanger; 2 x product pumps; measuring, sensor and control technology; various valves and other fittings.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Painting/Spraying Booth !! This is a brand-new machine directly from the manufacturer – we are the producers. The photos show previous installations for customers!! Professional painting/spraying booth Reinox 300×235, ideal for medium-sized parts and serial production. Designed for use in explosive environments (EX certification), it offers high extraction performance, efficient three-stage filtration, and reliability for continuous operation. Technical specifications: - Fan certified for ATEX zone 22 Kedpfx Asia Tauel Ajnb - Extraction surface: 3000 × 1900 mm - Overall dimensions: 3100 × 2350 × 1910 mm (dimensions without fan and control panel!) - Fan power: 3 kW (ATEX version) - Suction capacity of fan: 16,000 m³/h (max. 1,100 Pa) - Lighting: 2 × 36 W, ATEX certified - Power supply: 400 V, 3-phase Frequency inverter: For stepless control of fan output via potentiometer on the control panel. Filtration: Three-stage system Certification & Documentation: CE, EX / ATEX, complete technical documentation Warranty: as per standard (12 months) !!! Machines can be ordered in various custom configurations and dimensions !!! Please do not hesitate to contact us.

Kondisi: baru, Tahun pembuatan: 2025, fr Knodpfx Aohwrk Tol Asb

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 6.000 kW (8.157,72 hp), berat keseluruhan: 2.000 kg, panjang meja: 2.500 mm, lebar meja: 1.300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, This laser cutting machine is capable of processing sheet metal up to 12 mm thick. The Wattsan 1235 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working area of 1300x2500 mm. The precision Wattsan 1325 S is equipped with load-bearing rollers to facilitate material feeding. The S-Series laser metal cutter reaches a maximum traverse speed of 120 meters per minute. The laser output can be up to 6 kW. The frame is made of steel. For more details, please contact our managers! Kedpfx Aljiicwzo Asnb Wattsan Features Working area: 1300x2500 mm Laser power: up to 6000 W Weight: 1640 kg Virmer not only offers premium machines, but also service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. Furthermore, Wattsan device owners receive lifetime online support. Based in the Netherlands, Virmer operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding systems, marking machines, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and is constantly evolving with the help of its customers. Thanks to their feedback, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and powerful, so you can take your business to the next level. CONTACT US VIA EMAIL OR PHONE! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK If you are looking for a suitable laser or CNC milling machine, we are at your service. You will find a wide selection of laser machines and accessories with us: CO2 laser machine; metal laser cutting machine; metal laser cutter; fiber laser for metal; fiber laser engraving machine for metal; CNC metal milling machine; wood milling machine; CNC milling machine; laser engraving machine; laser engraver; laser cutting machine for plywood; metal laser cutter; CNC milling machine; laser marking machine; lenses; chillers; cooling systems for machines; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machines.

Tahun pembuatan: 2012, Kondisi: baik (bekas), Medium-pressure conveying system for wood chips Capacity: approx. 4 tons per hour Original conveying line: 180 m, 150 mm (partially available) Knedpfx Aeb Uyizjl Asb Airflow rate: approx. 2,350 m³/h Motor power: Three-phase motor according to IEC, 55 kW Protection class: IP54 1 housing made of high-quality cast iron, equipped with two axially parallel and centrally arranged, dynamically balanced rotary pistons, featuring hardened and ground, helical precision timing gears, each mounted in rolling bearings. Power transmission via V-belts, including two pulleys, high-performance narrow V-belts, and a protective cover. 1 drive unit with motor tension rails, shaft connection using easy-to-install Taper-Lock bushings, fully mounted on a common base frame. 1 combined intake filter and silencer (absorption-type silencer) 1 resonance-absorption pressure silencer, designed as base frame 1 base frame 1 pressure relief valve 1 check valve 1 flexible coupling with clamps 1 manometer 1 set of vibration isolators with mounting bolts 1 electronic pressure monitoring consisting of pressure transmitter, display unit, and electric output signal 1 soundproof hood made of galvanized sheet steel, with oil drip tray and top coat in RAL 5001, modular design with interior lining and forced ventilation, with fan wheel driven by blower shaft. Soundproof hood suitable for outdoor installation.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Likuidasi pabrik produksi masker. Instalasi tahun 2021, tidak beroperasi sejak Maret 2022. Peralatan sudah dibongkar dan siap kirim. - Meja silang tersedia - Sistem pengembalian tinta terintegrasi - Gerakan samping terintegrasi namun dapat dinonaktifkan Seri HERMETIC dapat digunakan baik sebagai stasiun kerja manual maupun dalam sistem otomatisasi. Untuk penggunaan manual, mesin ini unggul dengan banyaknya opsi pengaturan dan daya tekan tinggi, sedangkan dalam integrasi otomatisasi, keunggulannya adalah kontrol cam yang memastikan proses pencetakan berjalan stabil dan tenang. Fitur utamanya adalah sistem penggeraknya: Gerakan naik-turun bantalan cetak serta gerakan maju-mundur klise cetak diatur menggunakan cam disc. Kjdpfexqgk Uox Al Ajnb

Kondisi: baru, Tahun pembuatan: 2025, Faserlaser-Blechschneidemaschine mit Vollschutz Maximale Schneidfläche bis zu 12000mm x 2500mm, geeignet für vielfältige Schneidanwendungen. Die spezielle Faserlaserdüse und der Schneidprozess ermöglichen schnelleres Sauerstoffschneiden von Kohlenstoffstahl, gasoptimiertes Niederdruck-Nitrogenschneiden von Edelstahl sowie hochwertige Luftschnitt-Ergebnisse bei Kohlenstoffstahl. Schneidleistung und Effizienz werden durch gleichmäßigen Gasfluss mit minimalen Turbulenzen verbessert. Faserlaserschneidköpfe erfassen hervorstehende Hindernisse, um die Schadensrate effektiv zu reduzieren und Wartungskosten zu sparen. Der Schneidprozess funktioniert auch am Rand dünner Bleche und verhindert Rattermarken. Mit der One-Click-Bearbeitung kann ein Laser Cutter mehrere Bleche in Serienverarbeitung mit nur einer Einrichtung verarbeiten. Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1000W – 40000W Schneidbereich: 3048 x 1524 mm – 12500 x 2600 mm Schneidgeschwindigkeit: 0–110 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Kedpfx Ajh S H Rrol Ajnb CNC: Ja Kühlung: Wasserkühlung

Kondisi: baru, Tahun pembuatan: 2025, tinggi total: 4.000 mm, panjang total: 7.000 mm, lebar total: 3.000 mm, masa garansi: 24 bulan, suhu: 80 °C, kebutuhan udara: 36.000 m³/jam, tegangan masuk: 380 V, kapasitas pemanasan: 345 kW (469,07 hp), daya: 40 kW (54,38 hp), bahan bakar: gas petroleum cair (LPG), konsumsi energi: 40 kWh, bahan isolasi: Mineralwolle, ketebalan isolasi: 50 mm, daya nominal: 345 kW (469,07 hp), Perlengkapan: pencahayaan, MAIN STANDARD Our paint booths are designed to meet all essential requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes within the booth are managed by a PLC system, ensuring consistent maintenance of the desired values. OPERATING PRINCIPLES OF THE BOOTH The processes in the booth are controlled via a control panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through intake filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters prior to being released. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this phase, fresh air from outside circulates inside the booth. DRYING PROCESS In this phase, 80% of the air passing through the booth is heated to 60°C and distributed into the booth. Since 20% of the solvents are released during drying, these are expelled with the exhaust air. Industrial paints are typically dried at 60°C, though the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying process, the heating coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices within the booth. The panel is constructed from durable galvanized sheet metal and steel profiles, and is fully enclosed for protection against dust and moisture. Kjdpfx Aowzmcbsl Aonb Electrical Devices and Control Panel: • The control panel features essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating devices use 380 V 50 Hz, while control units operate at 220 V. • The booth’s operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time values for paint flash-off, intermediate drying, and final drying can be easily set to the required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Kondisi: baru, Tahun pembuatan: 2025, de Ksdpfjikivmox Al Aenb