FORKLIFT LISTRIK

Still RX 60-50

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.700 mm, panjang garpu: 1.600 mm, panjang total: 4.500 mm, - Operator seat device Hnedpjzluw Ejfx Aa Dop - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baru, Tahun pembuatan: 2026, The KDP220TOP sandblaster is a top-quality product designed to provide users with long-lasting and reliable operation. It enables fast and efficient cleaning of various types of surfaces and components. Equipped with an overhead lid supported by telescopic cylinders, it significantly improves ergonomic handling and makes loading heavy items easier. The 220-liter capacity allows for efficient cleaning of larger surfaces in a short amount of time. Advantages of our sandblaster model: - Ready for immediate use - Ergonomic sandblasting gun with 4 replaceable ceramic nozzles - Large, stable front doors with a perimeter rubber seal to ensure safe and dust-free operation - Telescopic cylinders for increased working comfort - High-quality integrated rubber gloves Hnodpfx Aovzqf Usa Djp - Ventilation port - Efficient work area lighting - 4 replaceable protective window/visor films - Sandblasting hose located at the bottom of the collection tank - Suitable for use with various abrasive materials - Drain port for quick media changes - Easy to operate, reliable, and safe to use Technical Specifications KDP220TOP Technical Parameters: AIR CONSUMPTION: 400–700 L/min MAX. PRESSURE: 8 BAR AIR CONNECTION: 1/4" quick coupling ABRASIVE TANK CAPACITY: approx. 18 kg EXTRACTION CONNECTION (vent): 63 mm VIEWING AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CHAMBER DIMENSIONS (LxWxH min-max): 840 x 550 x 370–550 mm EXTERNAL CHAMBER DIMENSIONS (LxWxH min-max): 890 x 560 x 1118–1380 mm WEIGHT: 49 kg DC23 Technical Parameters: MODEL: DC23 VOLTAGE: 220V POWER: 1200W SUCTION: >12kPa INLET DIAMETER: 45 mm CAPACITY: approx. 16L Standard Equipment: - Work area lighting – 12V fluorescent lamp powered by 230V with switch - 2 integrated high-quality rubber work gloves - 2 suction/extraction ports (63 mm and 90 mm diameters) for connecting an extraction device - Sandblasting gun with 4 replaceable ceramic nozzles (sizes: 4, 5, 6, 7 mm) - 4 replacement protective window/visor films - Overhead doors with rubber perimeter seals for dust-free operation - Stable work grid - User manual (Polish) - DC23 dust extraction unit - Approx. 2m connection hose - Filter bag

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 11.000 h, tinggi angkat: 3.950 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, panjang garpu: 2.210 mm, lebar garpu: 1.050 mm, tinggi total: 2.780 mm, panjang total: 2.890 mm, lebar total: 1.390 mm, warna: oranye, Berat: 7.121 kg Kapasitas Angkat: 5.000 kg - Tahun Pembuatan: 2012 - Dokumentasi tersedia: Ya - Tanda CE tersedia: Ya - Sertifikat CE tersedia: Tidak - Nomor Seri: 516329C00448 - Jam Operasi: 11.000 - Daya Angkat: 5000 kg - Tinggi Angkat: 3944 mm Hnodpozlklrofx Aa Dop - Tinggi Lewat: 2780 mm - Panjang Garpu: 2210 mm - Lebar Garpu Maksimum: 1050 mm - Lebar Garpu Minimum: 410 mm - Jumlah Roda: 4 roda - Peralatan Tambahan: Penyesuaian Garpu, Pergeseran Samping - Opsi: Pemanas, Lampu Kerja, Kabin Lengkap, Plat Nomor - Tiang: Duplex - Penggerak: Elektrik - Informasi Baterai: - Merek/Tipe: 6 PZM 930 - Tahun Pembuatan Baterai: 2015 - Kapasitas: 930Ah - Tegangan Baterai: 80V - Panjang Wadah [mm]: 1025 - Lebar Wadah [mm]: 995 - Tinggi Wadah [mm]: 780 - Dimensi Transportasi: 2896mm x 1399mm x 2780mm (p x l x t) - Berat Transportasi [kg]: 7121 kg - Paket Transportasi [unit]: 1 Informasi Keuangan Pajak Pertambahan Nilai (PPN): Harga yang tertera belum termasuk PPN. PPN/Pajak atas Selisih: PPN dapat dikurangkan untuk pengusaha. Pengiriman dan penawaran tukar-tambah tersedia kapan saja untuk semua produk dari sektor industri. Tess van den Boom

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 10.333 h, tinggi angkat: 3.700 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, panjang garpu: 2.390 mm, lebar garpu: 1.300 mm, tinggi total: 2.570 mm, panjang total: 2.890 mm, lebar total: 1.390 mm, warna: oranye, Berat: 7.025 kg Kapasitas angkat: 5.000 kg - Tahun pembuatan: 2019 - Dokumentasi tersedia: Ya - Jenis dokumentasi: Buku panduan pengguna - Tanda CE: Ya - Sertifikat CE: Tidak - Nomor seri: 516329V00563 Hjdpfx Ajyw Aauea Djnp - Jam kerja: 10333 - Daya angkat: 5000kg - Tinggi angkat: 3700mm - Tinggi maksimum saat melewati: 2580mm - Tinggi angkat bebas: 0mm - Panjang garpu: 2390mm - Lebar garpu maksimum: 1300mm - Lebar garpu minimum: 410mm - Jumlah roda: 4 roda - Peralatan tambahan: Pergeseran samping, pengaturan garpu - Opsi: Ban yang tidak meninggalkan bekas, kabin lengkap, lampu kerja, pemanas - Tiang: Duplex - Penggerak: Elektrik - Informasi baterai: - Merek/tipe: 6 PZS 930 - Tahun pembuatan baterai: 2019 - Kapasitas: 930Ah - Tegangan baterai: 80V - Dimensi pengiriman: 2896mm x 1399mm x 2570mm (p x l x t) - Berat pengiriman [kg]: 7025kg - Paket pengiriman [unit]: 1 Informasi keuangan PPN: Harga yang tertera belum termasuk PPN PPN/Pajak perbedaan: PPN dapat dikurangkan untuk pengusaha Pengiriman dan penawaran tukar-tambah tersedia kapan saja untuk semua produk dari sektor industri Tess van den Boom

Kondisi: bekas, jenis bahan bakar: diesel, Manufacturer: CATERPILLAR Model: V 250 Capacity: 12,000 kg Lift height: 3,710 mm Hjdpec Urcisfx Aa Djnp Boom height: 1,400 mm Width: 2,550 mm Overall length (with forks): 6,400 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 7.855 h, kapasitas angkut: 5.000 kg, tinggi angkat: 3.450 mm, pengangkatan bebas: 150 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: lain, tinggi konstruksi: 2.550 mm, kapasitas baterai: 930 Ah, kapasitas baterai yang tersisa: 84 persen, tegangan baterai: 80 V, Tersertifikasi DGUV hingga: 07/2027, panjang garpu: 1.200 mm, Perlengkapan: Pemeriksaan keselamatan UVV, Penandaan CE, geser samping, kabin, pencahayaan, riwayat servis lengkap, Forklift elektrik STILL RX 60-50 dengan spesifikasi sebagai berikut: * Kapasitas angkat: 5.000 Kg * Tinggi angkat: 3.450 mm * Tinggi keseluruhan: 2.550 mm * Tahun pembuatan: 2018 * Jam operasional: 7.855 Forklift elektrik STILL 5,0 ton, baterai sangat baik, ban bagus (ban belakang baru), tiang teleskopik dengan visibilitas yang baik, penggeser samping, alat penyetel garpu, sistem pencahayaan yang sesuai dengan standar StVZO, panjang garpu 1.200 mm, pengisi daya. Harga dari pabrik, termasuk 1.000 jam layanan sesuai dengan rekomendasi pabrikan STILL dan pemeriksaan FEM (UVV) yang masih berlaku pada saat penjualan. Inspeksi, demonstrasi, dan uji coba dapat dilakukan dengan perjanjian melalui telepon. Hjdszivfxspfx Aa Donp Penjualan hanya ditujukan untuk pelaku bisnis, dengan hak untuk perubahan harga dan kesalahan cetak. Kami dapat mengirimkan forklift baru Anda dengan biaya yang terjangkau menggunakan truk pengangkut khusus kami (biaya transportasi berdasarkan permintaan). Informasi dan penawaran lebih lanjut dapat Anda temukan di situs web kami yang telah didesain ulang!

Kondisi: bekas, Tahun pembuatan: 2019, kapasitas angkut: 5.000 kg, tinggi angkat: 6.670 mm, panjang total: 5.250 mm, - Seat operation (operator seat) - Load capacity: 5.0 t - Load center distance: 535 mm - Axle load front with load: 11,547 kg Hjdszhxzgspfx Aa Djnp - Axle load rear with load: 1,154 kg - Axle load front without load: 3,845 kg - Axle load rear without load: 3,866 kg - Tyres: SE (Super Elastic) - Number of wheels front (x = driven): 2x - Number of wheels rear (x = driven): 2 - Front track width: 1,104 mm - Rear track width: 920 mm - Mast/carriage tilt forward: 3° - Mast/carriage tilt backward: 6° - Coupling height: 546/421 mm - Aisle width for pallet 1000 x 1200 crosswise: 4,284 mm - Aisle width for pallet 800 x 1200 lengthwise: [value missing] - Turning radius: 2,549 mm - Smallest pivot point: 638 mm - Travel speed with load: 18 km/h - Travel speed without load: 19 km/h - Lift speed with load: 0.31 m/s - Lift speed without load: 0.44 m/s - Lowering speed with load: 0.55 m/s - Lowering speed without load: 0.46 m/s - Drawbar pull with load: 3,600 N - Drawbar pull without load: 4,400 N - Maximum drawbar pull with load: 15,670 N - Maximum drawbar pull without load: 16,090 N - Acceleration with load: 5.4 s - Acceleration without load: 4.7 s - Service brake: electric/mechanical - Drive motor output KB 60 min: 15 kW - Battery voltage: 80 V - Energy consumption 60 VDI cycles/hour: 12.1 kWh/h - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Sound level at driver's ear: dB (A) [value missing]

Kondisi: bekas, Tahun pembuatan: 1995, x-axis travel 1200 mm y-axis travel 600 mm Hedpfx Aaovw Duhs Denp z-axis travel 600 mm Table size 1300 x 600 mm Max. workpiece weight 2000 kg Spindle taper ISO 50 Spindle speeds, stepless 30 - 3500 rpm Feed rates, stepless 1 - 6000 mm/min Rapid traverse 10 m/min Milling spindle drive power 18 kW Spindle torque 500 Nm Distance spindle/clamping surface max. 267 - 867 mm Distance table/vertical head 58 - 658 mm Voltage 380 V / 50 Hz Control voltage 230 V Total power requirement 22 kW Machine weight approx. 6.5 t Dimensions 3.6 x 4.2 x 2.3 m CNC control DR. HEIDENHAIN TNC 360 Hydraulic tool clamping device Electronic handwheel Manually swivelling vertical head Coolant system,

Kondisi: bekas, nomor mesin/kendaraan: 516329J00165, Tahun pembuatan: 2018, dienst_001 Hnedpfey U R Rvox Aa Djp

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 4.221 h, kapasitas angkut: 5.000 kg, tinggi angkat: 3.480 mm, jenis bahan bakar: listrik, tipe tiang: simpleks, tinggi konstruksi: 2.650 mm, jenis penggerak: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Hjdpfovr Nqkox Aa Denp Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Battery voltage: 80V Battery year: 2020 Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: X-axis travel: 2500 mm Y-axis travel: 1000 mm Z-axis travel: 750 mm Hedpfxovptmwj Aa Dsnp Table size: 3220 x 1000 mm Max. workpiece weight: approx. 3000 kg Spindle taper: ISO 50 Spindle speed range: 20 – 5,000 rpm Feed rate: 1 – 30,000 mm/min Rapid traverse: 30 m/min Total power requirement: 40 kW Floor space required (approx.): 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with CNC control HEIDENHAIN TNC 426 30-station automatic tool changer RENISHAW touch probe Coolant system with internal coolant supply (IKZ) and chip conveyor Various tool holders

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 18.024 h, Jenis bahan bakar: Listrik Warna: Abu-abu Berat kosong: 7.121 kg Dimensi (P x L x T): 305 x 140 x 280 cm Kapasitas angkat: 5.000 kg Tinggi angkat: 420 cm Dimensi garpu: 1.150 x 2.240 mm - Tahun produksi: 2015 - Dokumentasi tersedia: Ya - Tanda CE ada: Ya - Sertifikat CE tersedia: Tidak - Nomor seri: 516329F00201 - Jam operasional: 18.024 - Daya angkat: 5.000 kg - Tinggi angkat: 4.200 mm - Tinggi bebas: 2.800 mm - Free lift: 0 mm - Panjang garpu: 1.150 mm - Lebar maksimum garpu: 2.240 mm - Lebar minimum garpu: 560 mm - Jumlah roda: 6 roda - Attachment: Sideshift, pengaturan garpu - Opsi: Lampu kerja - Mast: Duplex - Penggerak: Listrik - Informasi baterai: - Merek/Tipe: Still - Tegangan baterai: 80V - Dimensi transportasi: 3.050 mm x 1.400 mm x 2.800 mm (p x l x t) - Berat transportasi [kg]: 7.121 kg Hjdpfx Aaowfpk Ao Denp - Paket transportasi [unit]: 1 Informasi Keuangan PPN: Harga yang tertera belum termasuk PPN PPN/Pajak margin: PPN dapat dikreditkan untuk pengusaha Pengiriman dan tukar tambah tersedia kapan saja untuk semua alat industri Tess van den Boom

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 9.975 h, kapasitas angkut: 5.000 kg, tinggi angkat: 5.440 mm, pengangkatan bebas: 1.650 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.560 mm, lebar kerangka garpu: 1.300 mm, panjang garpu: 2.400 mm, berat kosong: 8.194 kg, panjang total: 2.900 mm, jenis penggerak: Elektro, lebar konstruksi: 1.400 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/45-15 non-marking Rear tires type: Superelastic Rear tires size: 200/75-9 non-marking Battery voltage: 80V Battery capacity: 840Ah Battery year of manufacture: 2009 Hnodpfxjxn U Ics Aa Dep Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, lift trucks & side loaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Lease-purchase and financing under favorable terms are always available. We are also happy to purchase your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this RX60-50. P.S.: Our master forklift workshop specializes in repair, servicing, refurbishment, and custom builds for forklifts from 8 tons upward. We can also offer your vehicle on a consignment basis at our facility. Side shifter, Full free lift,

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, Travel paths: Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transverse (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Hsdpsykbxzefx Aa Donp Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100 % duty cycle 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z axes: 25000 mm/min Weight (approx.): 15000 kg Equipment: - Internal coolant supply according to DIN 69871 form AD, including minimum quantity lubrication with 15 selectable dosages via M-functions, programmable: 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis, integrated into machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories: - Front-mounted movable control panel including Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head/2 planes at 2.5° increments (H200) (option) - Distance from spindle nose to table edge 250 mm - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into the machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots. - Coolant system with 150 l tank, delivery pressure 5 bar, delivery rate 50 l/min, outlet via spray ring around machine spindle - Splash guard enclosure, fully closed on 4 sides with front sliding doors and additional side sliding door on the left column with viewing windows on all 4 sides - Heidenhain servo motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system Heidenhain on all axes - Telescopic covers for X-axis guides - Ball screws in X, Y, and Z axes - Automatic cycle lubrication for all axes and drive elements - Electrical equipment by Siemens - Hydraulic system by Vickers

Kondisi: baik (bekas), nomor mesin/kendaraan: 14352, Tahun pembuatan: 2022, jam operasional: 5.409 h, kapasitas angkut: 5.000 kg, tinggi angkat: 4.780 mm, pengangkatan bebas: 1.500 mm, pusat beban: 600 mm, tinggi konstruksi: 2.500 mm, panjang garpu: 2.400 mm, ukuran ban depan: 355/50-15 sit weiss, ukuran ban belakang: 23x9-10 weiss, berat keseluruhan: 8.258 kg, jenis mesin: Listrik, produsen: Still Hjdpfxoyv S I Ss Aa Donp