Plat penjepit 3000 x 2000 (3 buah)

Stolle

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Knsdpfx Aju Ixznsahof Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Centre distance: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1250 / 32-1600 / 36-1800 – 18 steps rpm Feed rate: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed rate 0.015 – 2.8 mm (limit switch coupling not functional, manual shut-off required) Top slide with 4-way tool post Steel plate Ø 705 mm with offset threaded holes *

Kondisi: sangat baik (bekas), CTS Model: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40 °C to +180 °C Humidity Range: 10% to 98% relative humidity +10 °C to +90 °C in temperature mode +5 °C to +89.5 °C dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated Current: 13 A Buyer Information for Your Safety! The following steps are performed on the climate chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, replacement with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data!) Knjdpsu Hlb Ejfx Aahef If you have any further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), tinggi total: 350 mm, berat keseluruhan: 5.000 kg, lebar total: 1.500 mm, tinggi meja: 350 mm, panjang total: 4.200 mm, Meja penjepit bekas 4200 x 1500 x 350 mm Berat kira-kira 5000 kg Knodpfxsuzaafj Aahsf

Kondisi: bekas, Toolholder, tool post, turning tool, lathe tool holder, tool holder, axial tool holder, driven tool, bar puller, thread cutting head - Manufacturer: Sandvik, 17 turning tools with tool rack - Shank size: Ø 40 mm Knodsgl Dutepfx Aahof - Various types: see photos, additional pictures available upon request - Sale: only sold as a complete set - Overall dimensions: 400/660/H500 mm - Weight: 25.6 kg

Kondisi: baik (bekas), Tahun pembuatan: 2006, panjang total: 4.000 mm, lebar total: 2.500 mm, tinggi pelat: 300 mm, PAMA manufacturer Type: Floorplates Year of manufacture: 2006 2 units available: matching cast iron floorplates/bedplates Kedpfx Aewpvcysahjnf Integrated levelling chambers Can be used in combination with PAMA SPEEDRAM 1000 MachID 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric | US Standard Length: 4000 mm Width: 2500 mm Height: 300 mm Number of T-slots: 10 T-slot spacing (pitch): 250 mm T-slot size: 26 mm Weight per plate: approx. 7800 kg Number of matching pieces: 2 Dimensions (approximate) Length: 4000 mm Width: 2500 mm Height: 300 mm Weight: 7800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute any representation or contractual terms. We recommend that you verify all critical details.

Kondisi: baik (bekas), Tahun pembuatan: 2000, panjang total: 4.000 mm, lebar total: 2.500 mm, tinggi pelat: 320 mm, Length: 4000 mm Knedpjwwr Unjfx Aahef Width: 2500 mm Height: 320 mm

Kondisi: baik (bekas), panjang total: 3.500 mm, lebar total: 2.000 mm, tinggi pelat: 350 mm, Manufacturer: ASQUITH Model: ST-35 Specifications Metric | US Standard Length: 3500 mm Width: 2000 mm Height: 350 mm Number of T-slots: 8 T-slot spacing / Pitch: 285 mm T-slot size: 36 mm Kodpfxewp D S Ne Aahenf Number of matching pieces: 1 Dimensions (Estimated) Length: 3500 mm Width: 2000 mm Height: 250 mm Weight: 5250 kg Please note: The information provided on this page has been given to the best of our knowledge and, where possible, sourced from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. As such, these details do not constitute any representation or contractual terms. We recommend verifying all critical details independently.

Kondisi: baik (bekas), panjang total: 4.010 mm, lebar total: 2.100 mm, tinggi pelat: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Specifications Metric US Standard Length: 4010 mm Width: 2000 mm Height: 220 mm Knjdpfxowp Dhde Aahef Number of T-slots: 13 T-slot spacing / pitch: 400 mm T-slot size: 35 mm Weight per plate approx.: 5,300 kg Dimensions (Estimated) Length: 4010 mm Width: 2100 mm Height: 220 mm Weight: 5300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, has been obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. As such, it does not constitute representation or contractual terms. We recommend that you verify all essential details independently.

Kondisi: baik (bekas), Manufacturer: STOLLE Year of manufacture: 1995 Specifications Metric US Standard Length: 2520 mm Width: 2000 mm Height: 230 mm Number of T-slots: 8 T-slot spacing: 252 mm T-slot size: 22 mm Approximate weight per plate: 2.7 t Number of matching pieces: 1 Dimensions (estimated) Knsdpfx Aajwpuxyjhof Length: 2520 mm Width: 2000 mm Height: 230 mm Weight: 2700 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, where possible, sourced from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, these details do not constitute representations or contractual terms. We recommend verifying all important details.