Gergaji panel berdiri

Striebig Automat II Plus 6220 AV

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position Isdpfxobxz S Hs Aahetr The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board Itedpfx Aasvvkfdjhjr - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, de-01 Iodpsxaphzefx Aahotr

Kondisi: baru, Otomatis pemotong dan pembelah kayu TITAN 43/20 CD+E dengan kontrol joystick memotong batang dengan diameter maks. ø 43 cm menggunakan pedang harvester dan membelahnya dengan gaya belah 20 ton. Ini adalah mesin kombinasi (sambungan listrik dan PTO). Demonstrasi dan inspeksi dapat dilakukan berdasarkan janji temu – mesin saat ini tersedia di gudang, siap pakai segera. Penjualan gudang – Harga khusus – Penjualan sewaktu-waktu dapat terjadi. Iodpfx Aajtrmg Hohotr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 2.400 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 810 mm, CNC HEIDENHAIN iTNC 530 Ijdpsq Rcu Eofx Aahotr X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 rpm, 40 kVA, traverse paths Weight 7,800 kg Table with vacuum plate with BORNEMANN 960 extraction system

Kondisi: baru, Tahun pembuatan: 2025, Circular saw with table, right-side table extension, and both straight and mitre fence. This machine incorporates many features typically found in higher-priced equipment of this type. An excellent price-to-performance ratio has been achieved without compromising quality or versatility. Machine Description This innovative circular saw combines power, precision, versatility, and a compact build. It has been designed for small woodworking shops, furniture manufacturers, and craftsmen. This machine integrates numerous solutions usually reserved for more expensive equipment in its class. The outstanding price-to-performance ratio is delivered with no compromise to quality or universality. Includes: 250 x 30 x 2 mm carbide-tipped saw blade MAX. BLADE/BORE DIAMETER: 254x30 mm BLADE SPEED: 4000 rpm BLADE TILT RANGE: 90 – 45° Itedpfjvxhkiox Aahsr MAX. CUTTING DEPTH AT 45º: 65 mm MAX. CUTTING DEPTH AT 90º: 80 mm RIP CAPACITY WITH TABLE EXTENSION: 750 mm MAX. CUTTING LENGTH: 1000 mm EXTRACTION PORT: 100/25 mm TABLE DIMENSIONS: 635 x 420 mm TABLE DIMENSIONS WITH EXTENSION: 635 x 1500 mm MOTOR POWER: 2.2 kW (S1) 230V / 3.1 kW (S6) WEIGHT: 110 kg DIMENSIONS: 1450 x 1000 x 1100 mm Manufacturer: Cormak

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), Max. cutting depth: 80 mm, Cutting area: 5300 x 2200 mm, Length: 6665 mm, Width: 3015 mm, Height: 1810 mm, Weight: 840 kg, with documentation. Itodpspcgy Hofx Aaher

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Isdpfx Aaskfp D Tehstr Technical data and dimensions: Subject to change/errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, diameter sambungan ekstraksi: 120 mm, lubang pisau gergaji: 30 mm, kedalaman pemotongan: 110 mm, diameter utama gergaji: 400 mm, diameter nosel ekstraksi: 120 mm, hentian panjang: 3.200 mm, lebar kerja: 1.100 mm, Perlengkapan: rem mesin, Format 4 x motion in excellent condition, always operated by a single person Ijdpfx Aov Aywpjahstr

Kondisi: baik (bekas), Tahun pembuatan: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max. 785 mm -Cutting height: max. 475 mm -Saw blade: length 5600 mm -Work table: tiltable -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg Iodpfjh N Thwox Aahstr