Mesin cetak injeksi

Sumitomo (SHI) Demag EL-EXIS S 300/720-1450

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 390 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 827 kg, Carrier chiller air water Model: 30RBS-140B0181-ME, tahun 2016, R410A 135 kW (116.100 frigoria), hanya dingin, konsumsi maksimum: 61 kW. Dimensi: 2258x2050x1330 mm, heat exchanger tipe pelat, berat: 827 kg. Mesin telah diuji sepenuhnya di gudang kami dengan gas, dapat diperiksa. Referensi: 1137 Dedpfxeyfwuzo Akaecn

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4 kN, diameter sekrup: 70 mm, Offer Details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control type: CC200 Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 4,000 kN Platen size (H x V): 1,400 x 1,080 mm Min. mold installation height: 350 mm Opening stroke: 1,300 mm Ejector stroke: 250 mm Dcodpsu Awaljfx Akaen Ejector force (forward): 83 kN Injection Unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electrohydraulic Equipment: Pump motor rated power: 45 kW Dimensions and Weights: Space requirement (approx.): 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Vibration dampers - 2 x 24-fold water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Kondisi: bekas, Tahun pembuatan: 2007, Mesin Wire EDM Sodick AQ537L tahun 2007 dengan jam kerja rendah Dilengkapi penghitung total jam operasi, yaitu jam mesin menyala. Meteran menunjukkan sekitar 4.500 jam, dari mana sekitar 70% digunakan untuk proses pemotongan wire EDM yang sebenarnya, yaitu sekitar 3.100 – 3.500 jam kerja efektif. Dedpfxjy Rxtko Akaocn Mesin Wire EDM Sodick AQ 327L tahun 2006 Mesin Wire EDM Sodick AG 60L tahun 2020

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Dcsdpfx Asy Hmfyjkaon Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.

Kondisi: bekas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned: 2017 Equipped with CNC path control SIEMENS 840D SL (Solution Line) with 5 simultaneously controlled axes Traverse paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/– 135° (270°) B-axis 360° infinite Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7,500 N Feed force Z-axis 10,000 N Positioning tolerance (X/Y/Z) 0.008 mm Swivel speed A-axis 180° rotation in 4 sec. Interference circle diameter in the swiveling bridge max. 1400 mm Transport load in the swiveling bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle output 37 kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent pockets occupied Ø 140 mm Tool diameter with adjacent pockets empty Ø 250 mm Tool length max. 400 mm Tool weight max. 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Pneumatic connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37 kW/40% duty cycle) with liquid cooling and recooling device - 2-axis rotary tilting table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary axis’s table - Double pallet changer, without pallets (new pallets must be procured) - Media transfer with 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) Dedst Ac Efjpfx Akaocn - Tool changer with 30 tool positions, as disc turret - Machine designed for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper-belt chip conveyor, ejection height 1,150 mm - Licon ECO-Mode (energy-efficient operation of aggregates) - Direct position measuring system in all axes - Logged operating hours with control voltage on = approx. 7,500 h Space requirement for operation L x W x H 9,000 x 5,000 x 3,800 mm Space requirement for transport L x W x H 6,100 x 4,400 x 3,600 mm Basic machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), X/Y/Z travel: 2500mm/900mm/800mm, spindle speed: 18,000 rpm, spindle power: 35 kW, max. table load: 3,000 kg, tool stations: 30. Machine dimensions X/Y/Z: approx. 6,500mm/3,000mm/3,000mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D, operating hours: 55,730h, spindle hours: 18,696h. Z-axis brake defective, machine enclosure shutter defective, monitor cable defective. Includes Knoll VRF 250/1250 coolant system. Documentation available. Inspection on site possible. Dsdpfxovamqdo Akaecn

Kondisi: baik (bekas), Tahun pembuatan: 2004, Atas permintaan, dengan biaya tambahan, pemuatan dan transportasi (seluruh Eropa) dapat diatur. Semua harga termasuk PPN. Peninjauan dapat dilakukan dengan perjanjian janji temu. Hubungi kami, tim kami dengan senang hati akan membantu Anda. Tukar tambah atau pertukaran dimungkinkan! Telepon: Ponsel: juga melalui WhatsApp Web: Pembelian / Penjualan mesin PEMBELIAN / PENJUALAN MESIN PRODUKSI & PENGOLAHAN LOGAM DAN LAINNYA. Apakah Anda membutuhkan mesin pengolah logam berkualitas namun terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Dcodpfx Aksxirqqsajn Untuk informasi lebih lanjut atau cara menghubungi, kunjungi situs web kami.

Kondisi: bekas, Tahun pembuatan: 2002, Wire EDM machines Travel X-axis: 750 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Dedpfx Aksw Ei Stoaocn Max. workpiece size X: 1050 mm Max. workpiece size Y: 750 mm Max. workpiece size Z: 400 mm Max. workpiece weight: 1,500 kg U / V axis: 770 x 520 mm Generator: 60 amp Linear drive

Kondisi: baik (bekas), Tahun pembuatan: 1994, Foldable latch Dsdpjc Nw N Nefx Akajcn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 6,500 kN Djdpoub S R Hefx Akaecn Maximum mold opening force: 346 kN Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67