All-electric injection molding machine – only approx. 9,000 operating hours

Sumitomo (SHI) Demag IntElect2 100/470-250

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 9.500 h, gaya penjepit: 1.000 kN, berat keseluruhan: 5.290 kg, Mesin cetak injeksi 5 sumbu, tipe SUMITOMO SHI DEMAG IntElect2 100/470-250 ini diproduksi pada tahun 2021. Mesin ini memiliki gaya penguncian sebesar 1000 kN dan jarak antara pelat sebesar 470 mm. Mesin ini dilengkapi dengan unit injeksi berukuran 250 dan diameter sekrup sebesar 30 mm. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, pertimbangkan mesin cetak injeksi elektrik SUMITOMO SHI DEMAG IntElect2 100/470-250 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. - Jarak antara pelat pengunci: 470 mm - Tinggi cetakan minimum: 180 mm - Tinggi cetakan maksimum: 550 mm - Diameter pemusatan (pelat tetap): 125 mm - Diameter pemusatan (pelat bergerak): 125 mm - Langkah ejektor: 150 mm - Gaya ejektor: 32 kN - Kecepatan ejektor: 333 mm/s - Ukuran unit injeksi: 250 - Diameter sekrup: 30 mm - Rasio L/D: 20 - Kecepatan injeksi: 350 mm/s - Pengontrol: SDIAS - Sambungan/tegangan listrik: 400 V / 50 Hz - Arus listrik: 70 A - Arus hubung singkat (Icw): 2,0 kA - Tekanan hidrolik maksimum (Pmax): 210 bar - Berat total: 5290 kg - Model sistem robot: SDR 5S H&P - Daya angkut robot: 3 kg - Jangkauan gerakan X robot (gerakan melintang): 1000 mm (sisi yang tidak menghadap operator) - Langkah Y robot (langkah pelepasan): 400 mm - Langkah Z robot (langkah vertikal): 1000 mm - Peralatan tambahan/periferal: - Hopper material/ban berjalan: KOCH TECHNIK Dcsdpezp Ew Defx Aavop - Pengatur suhu: HB-THERM Thermo-5

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341883, TECHNICAL SPECIFICATIONS Capacities: Dcodpjzb U Epjfx Aavep Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstock: Standardized spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Spindle clamping force: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Travel on X-axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feed Rates: Working feed (X/Z axes, stepless): 0–5000 mm/min Rapid traverse (X/Z axes): 8/10 m/min Feed force (X/Z axes): 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 AC motor, peak power (intermittent duty): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardized toolholder fixing: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant System: Tank capacity: 120 liters Pump rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i CNC control 1 A2-6 spindle headstock 1 12-station VDI 30 turret for 6 driven tools 1 pneumatically controlled tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 3-jaw chuck 1 Brucker CM5 live center 1 ESX-25 radial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25 without EX nut 1 EWS ESX-25 without EX nut 4 left radial toolholders, short, Form B2, ref 4100.0100 1 ESX-25 collet holder, Form E3 with EX25 nut and Ø 5 mm collet 1 same, without EX25 nut 3 tapping collets Ø 4.5–6 and 8 mm 1 indexable insert drill holder, Ø 40 mm bore, Form E1, ref 4100.00124 1 same, Ø 32 mm bore, ref 4100.00107 1 same, Ø 20 mm bore, ref 4100.00105 1 boring bar holder Ø 8 mm, Form E2, ref 4100.00108 1 same, Ø 10 mm, ref 4100.0109 1 same, Ø 12 mm, ref 4100.0110 2 same, Ø 16 mm, ref 4100.0111 1 same, Ø 20 mm, ref 4100.0112 1 same, Ø 25 mm, ref 4100.0113 1 same, Ø 32 mm, ref 4100.0115 1 same, Ø 32 mm, GARANT, long 5 steel protection plugs, Form Z2, ref 4100.00130 1 left axial toolholder, Force C4, ref 4100.00103 1 pneumatically controlled tailstock support, CM 5, ref 180-65.200 1 stand only for microscope, ref 180-60.005 1 coolant device OPTIONAL ACCESSORY 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref 180-70.200 chf. 2,500.-- + VAT Subject to errors or omissions, the technical information is provided without obligation.

Kondisi: diremaj di bengkel (bekas), bsta-110h-vorschub-bbv-202-120 Dcsdeizi Hmopfx Aavsp

Kondisi: bekas, Centerless grinding machine ESTARTA 310 Dsdpfxeq Ehqfo Aavocp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Palmary GU20x40NC universelle Rundschleifmaschine Baujahr: 2010 TECHNISCHE DATEN: Leistungsdaten Umlaufdurchmesser über Tisch: Ø210 mm Spitzenweite: 400 mm Max. Außenschleifdurchmesser: Ø200 mm Max. Spitzenlast: 60 kg Schleifscheibe Außen- x Breite x Innen-Ø: Ø355 x 38 x Ø127 mm Lineargeschwindigkeit: 33 m/s Schleifscheiben-Achse – X-Achse Handverstellung: 135 mm Automatischer Schnellvorschub: 25 m/min Max. Hub: 185 mm Min. Einstellwert: 0,001 mm 1 Umdrehung Handrad (Skala): 2 (0,005) mm Tisch – Z-Achse Vorschubgeschwindigkeit: 1,5 m/min Max. Hub: 480 mm Autom. Umkehrhub, min.: 8 mm Vorschub pro Handradumdrehung (2-stufig): 20 mm (2 mm) Schwenkwinkel: -3°, +12° Dcodpfx Aeytftbjavjp Werkstückspindelkopf Schwenkwinkel: -30° bis +90° Mitnahme MK: MK 3 Spindeldrehzahl (stufenlos): 10–300 U/min Max. Spindellast (inkl. Werkzeugaufnahme): 15 kg (max. Länge: 100 mm) Reitstock Mitnahme MK: MK 3 Hub: 20 mm Feineinstellbereich: ±0,03 mm Motor Schleifscheibenspindel: 2,2 kW (4PS) Stromversorgung Gesamtleistung: 7 kVA Behälter Schleifspindelschmierölbehälter: 7 l Hydrauliköltank: 46 l Kühlmitteltank: 110 l Maschinengewicht: 2.000 kg Zubehör/Optionen: - Schleifscheiben - Flansche - Innenschleifspindel - Marposs Active-Messsystem - 2-Achsen-Digitalanzeige, SINO - Handwerkzeug - Dokumentation Unter Strom in unserem Lager.

Kondisi: sangat baik (bekas), Merek: ESTARTA Model: 312 Tipe: Mesin Gerinda Tanpa Pusat Dcsdpfx Aex Iu E Djavop Dimensi batu gerinda: 508 x 304,8 x 160 mm Ø min/maks benda kerja: 1,5 / 75 mm Lebar batu pengatur: 160 mm Dimensi batu pengatur: 304,8 x 190,5 x 160 mm Panjang maksimum gerinda metode plongeé: 160 mm Lebar batu gerinda: 160 mm Daya motor kepala batu gerinda: 11 kW Dimensi mesin: 2015 x 1280 x 1440 mm Berat: 3500 kg

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Die height (stroke down, adjustment up): 370 mm Table clamping area approx.: 1600 x 1100 mm Ram clamping area approx.: 1600 x 1100 mm Pass-through opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Table height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions (LxWxH): 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standards in 2015. In 2021, a SIEMENS S7-TIA control system was installed on the press; the coil feeding line still has a SIEMENS S5 control system. Additional equipment Lifting rails in the press table Automation Coil line KEMMERICH consisting of: Decoiler: capacity: 5 t Straightening machine: Roller diameter: 70 mm Material thickness: 1 - 4.5 mm Strip width: 300 mm Roller feed: Roller diameter: 160 mm Feed length: 0.1 - 9,999.9 mm Strip width: 30 - 350 mm Material thickness: 0.2 - 10 mm Material cross-section: 1,500 mm² Dcsdpouqd Tmsfx Aavop Feeding accuracy: +/- 0.05 mm Loading station

Kondisi: bekas, A used, well-maintained guillotine shear from Vöest Alpine Cutting length: 2010 mm Dcedpfx Aopgmpdoavjp Cutting capacity in steel up to 370 N/mm² tensile strength: 5 mm Strokes per minute: 50 spm Hold-down pressure: 30 bar Number of hold-downs: 8 pcs. Manually adjustable backgauge: 950 mm Throat depth: 150 mm Dimensions (LxWxH): 280 x 190 x 140 cm Weight: 2,500 kg

Tahun pembuatan: 2023, Kondisi: baru, Ultraschallreiniger mit SPS, speziell entwickelt für medizinische Anforderungen. Dcodefg Eqwjpfx Aavjp Kapazität: 50 Liter Automatische Befüllung: vorhanden Automatische Dosierung: vorhanden Deckel: pneumatischer Kolben Programmierbar: Ja, mit SPS Füllstandskontrolle: vorhanden Ultraschallreiniger, Ultraschall-Entfettungsanlage, Ultraschall-Waschanlage, kompakte Ultraschall-Waschmaschine, medizinischer Ultraschallreiniger, Automotive

Jam operasional: 12.000 h, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Line for punching with a Raster press, comprising: Dsdsryu Tajpfx Aavocp 1) Dimeco Alipresse decoiler, type 2330DF, equipped with an SV tracking and speed adjustment system. 2) Dimeco Alipresse powered straightener, type 1645, fitted with an SV tracking and speed adjustment system. 3) Raster eccentric press, type HR 60 SL-4 S, with a soundproof enclosure. Specifications available in the photos. 4) Documentation.