SUMITOMO SHI DEMAG El-Exis S250/630-1600
SUMITOMO SHI DEMAG El-Exis S250/630-1600

Name: SUMITOMO SHI DEMAG El-Exis S250/630-1600
Brand: SUMITOMO SHI DEMAG
Availability: InStock

Tahun pembuatan

2012

Kondisi

Bekas

Lokasi

Jerman

SUMITOMO SHI DEMAG El-Exis S250/630-1600 SUMITOMO SHI DEMAG El-Exis S250/630-1600

SUMITOMO SHI DEMAG El-Exis S250/630-1600

Tampilkan peta

Data mesin

Nama mesin:: SUMITOMO SHI DEMAG El-Exis S250/630-1600

Pabrikan:: SUMITOMO SHI DEMAG

Model:: El-Exis S250/630-1600

Tahun pembuatan:: 2012

Kondisi:: siap digunakan (bekas)

Harga & Lokasi

Lokasi:: , Jerman

Hubungi

Rincian teknis

Gaya penjepit:: 2.500 kN

Diameter sekrup:: 50 mm

Berat injeksi:: 482 g

Tinggi total:: 2.400 mm

Berat keseluruhan:: 14.900 kg

Rincian penawaran

ID iklan:: A20704845

Nomor referensi:: DE-INJ-SUM-2012-00001

Pembaruan:: terakhir pada 19.01.2026

Deskripsi

This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 we have available for sale. Please contact us for further information.

• Clamping unit size: 250
• Locking force: 2,750 kN
• Platen size (H x V): 930 x 930 mm
• Tie bar spacing (H x V): 630 x 630 mm
• Ejector retraction force: 40 kN
• Injection unit (size 1600)
• Screw geometry: Standard
• L/D ratio: 25
• Injection rate (PS, without accumulator): 530 cm³/s
• Dosing stroke: 270 mm
• Maximum nozzle stroke: 110 mm
• Material hopper capacity: 110 l
• Electric metering drive: 13.1 kW
• Cylinder heating: 14.8 kW
• Dry cycle time (EUROMAP 6): 1.2 s
• Dry cycle stroke (EUROMAP 6): 441 mm
• Dimensions
Lrsdpfxex D Nwqj Aglsg
• Max. drive overhang with nozzle contact: 184 mm
• Max. drive overhang with nozzle retraction: 1,279 mm
• Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm

Dimensions
Machine depth: 6,600 mm

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2017

1.379 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 631 7... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin cetak injeksi KRAUSS-MAFFAI KM 150-700 C1

Bockhorn

11.139 km

Mesin cetak injeksi
KRAUSS-MAFFAIKM 150-700 C1

Hubungi

Iklan kecil

Mesin penggiling poros bubungan JUNKER JUCAM 6XS /12

Nürnberg

11.011 km

Mesin penggiling poros bubungan
JUNKERJUCAM 6XS /12

Hubungi

Kondisi: bekas, Tahun pembuatan: 2014, Workpiece length 100 mm Swing diameter 80 mm Number of spindles 2 Control FANUC 31i-B5 Workpiece weight 2.00 kg Ljdpfxsvx Uvfj Aglsrg Center height 170 mm Grinding wheel diameter 100 mm Grinding wheel bore 32 mm Max. grinding wheel width 20 mm Max. circumferential speed 125 m/sec Steady rest passage 45 - 60 mm Total power requirement 75.00 kW Machine weight approx. 25.00 t Space requirements approx. 5.00 x 3.50 x H3.50 m Camshaft grinding machine for cam blanks. Equipped with FANUC 31i-B5 control for non-circular grinding; loading gantry; CO2 extinguishing system; for CBN grinding wheel; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock variant 12 (two grinding spindles movable independently)

Lihat detail

Iklan kecil

Arburg 420 C 1000-350 Arburg 420 C 1000-350

Slovakia

10.395 km

Arburg 420 C 1000-350
Arburg420 C 1000-350

Hubungi

Iklan kecil

Walkeringham

11.700 km

Keripik kentang
EillertC25 H

Hubungi

Iklan kecil

Mesin cetak injeksi ARBURG 470S1100-400/290

Jerman

11.023 km

Mesin cetak injeksi
ARBURG470S1100-400/290

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 14.500 h, Fungsionalitas: berfungsi sepenuhnya, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar distance: 420 x 420 mm Mould height min. / max.: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Shot weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Shot weight: 97 g/PS Control system: SELGOCIA Equipment: Lrjdpfxju E E Suj Agleg - 3 x core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year of manufacture: 2010 - Conveyor belt - Safety fence

Lihat detail

Iklan kecil

Mesin pembuat tas Lemo Intermat 850 STN-CP Knoter

Jerman

11.023 km

Mesin pembuat tas
LemoIntermat 850 STN-CP Knoter

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, This is a side-weld wicket bag making machine, Lemo Intermat 850 STN-CP Knoter. Production type: Wicket bags for bread, chicken, diapers, toilet paper, hygiene products, and other types of wicket bags. Number of lanes: single lane / lane-wicket. Processable materials: LDPE, HDPE, PP, and recycled compounds. Sealing width (bag length): 120-450 mm, draw-off length (bag width): 200-850 mm, gripper arm length: 600 mm. Maximum linear speed: 65 m/min. Output capacity: 140 knotted bags/min, maximum number of bags per stack: 250. Drive system: PLC-controlled, operator interface (control terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (bottom gusset only), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross-sealer, handle punch, photoelectric sensor for printed film, automatic one-step conveyor belt (indexing conveyor), handle punching unit, G-gusset unit, V-folding station, web guide control 1800 mm, antistatic bars, automatic labeling system. The machine is in good condition. Lredew U T T Espfx Aglsg

Lihat detail

Iklan kecil

Mesin cetak injeksi Netstal Synergy 1000-230

Weißenburg in Bayern

11.026 km

Mesin cetak injeksi
NetstalSynergy 1000-230

Hubungi

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, For sale is an injection molding machine from Netstal, model Synergy 1000-230. Following a transport accident, the control cabinet is completely damaged, so the machine is offered as a source of spare parts or for repair. The machine would otherwise be fully operational and is in good condition. Technical data: Operating pressure: 210 bar, Injection force: 182 kN, Clamping force: 1,000 kN, Opening stroke: 0-400 mm, Mold height: 450-750 mm, Total weight: 7,200 kg, Operating hours: approx. 53,000 Available from March 2024. Ledsrfbnmepfx Aglerg Initial fillings with hydraulic oil can be ordered from us. Upon request and for an additional charge, we can arrange loading and transport across Europe. All prices are plus VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Lihat detail

Iklan kecil

Sistem Demag 500/900-3300 (2006) Demag System 500/900-3300

Trenčianske Stankovce

10.519 km

Sistem Demag 500/900-3300 (2006)
DemagSystem 500/900-3300

Hubungi

Iklan kecil

Mesin cetak injeksi KraussMaffei KM 350 - 2700 C2

Wrocław

10.574 km

Mesin cetak injeksi
KraussMaffeiKM 350 - 2700 C2

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2006, Krauss Maffei Injection Moulding Machine KM 350 - 2700 C2 Year of manufacture: 2006 Control system: MC 4 Technical specifications Clamping unit: Clamping force: 3,500 kN Maximum mould opening force: 220 kN Moving platen travel force (Opening): 105 kN Moving platen travel force (Closing): 95 kN Mould platen size (h x v): 1,060 mm x 1,095 mm Tie bar spacing (h x v): 710 mm x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1,300 mm Hydraulic ejector – stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Lrjdpfxjmki Iue Agljg Injection unit Screw diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1,829 bar Shot volume: 1,433 ccm Shot weight, PS: 1,304 g Injection rate: 513 ccm/s Screw speed: 218 rpm Max. plasticising rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor output: 75 kW Installed heating capacity: 36 kW Adjustable heating zones (barrel): 7 Tank capacity: 720 litres Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total machine weight: 15,300 kg Maximum mould weight: 4,780 kg

Lihat detail

Iklan kecil

Mesin cetak injeksi Arburg 320 S 500-150

Burgoberbach

11.050 km

Mesin cetak injeksi
Arburg320 S 500-150

€6.000

harga tetap ditambah PPN

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, gaya penjepit: 500 kN, tekanan injeksi: 2,2 batang, For sale is an injection moulding machine made by Arburg, model 320 S 500-150. The machine is fully operational. Technical specifications: - Clamping force: 500 kN - Distance between tie bars: 320 mm x 320 mm - Mould thickness: 225–350 mm - Platen dimensions: 445 mm x 445 mm - Maximum platen opening: 550 mm - Screw diameter: 30 mm - Injection pressure: 2,200 bar - Weight: 2,250 kg On request and for an additional fee, dismantling, loading, and transport can be arranged Europe-wide. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Ledpfeqmn Egex Aglsrg For further information or contact options, please visit our website.

Lihat detail

Beriklan di sini