PUSAT PERMESINAN VERTIKAL

SUNMILL VANTAGE JHV - 1500

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travel paths: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping surface: 1,200 x 510 mm Dujdpfxjrfw Nhe Aftjp Tool changer: 20 magazine slots Chip conveyor included.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Duodpfxswrp Emo Aftsp Equipment shown in the last 6 images.

Kondisi: baru, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy-Duty Mulching! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and fallow land maintenance. Featuring a dual belt drive, 36 carbide-tipped hammers, and hydraulic equipment, it is ideal for tractors from 110 HP – reliable, powerful, and built for tough applications. Technical Specifications – Brugger FMP225: Working width: 225 cm Drive: Dual belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 HP Weight: approx. 1,800 kg Mounting: Three-point linkage, CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 units, carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for rear flap, 1x for hold-down device) Features: Hydraulic rear flap and hold-down device Includes: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = 10,900 EUR Brugger FMP200 200cm – 32 hammers, 1,700kg = 11,900 EUR Brugger FMP225 225cm – 36 hammers, 1,800kg = 12,900 EUR Dusdpswhyzwsfx Aftep ----- Contact us for a tailor-made offer!

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: X-axis travel: 2500 mm Dusdpfx Afjvptmwstop Y-axis travel: 1000 mm Z-axis travel: 750 mm Table size: 3220 x 1000 mm Max. workpiece weight: approx. 3000 kg Spindle taper: ISO 50 Spindle speed range: 20 – 5,000 rpm Feed rate: 1 – 30,000 mm/min Rapid traverse: 30 m/min Total power requirement: 40 kW Floor space required (approx.): 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with CNC control HEIDENHAIN TNC 426 30-station automatic tool changer RENISHAW touch probe Coolant system with internal coolant supply (IKZ) and chip conveyor Various tool holders

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 800 mm, kedalaman penyisipan: 800 mm, tinggi penyisipan: 150 mm, panjang pemotongan (maks.): 800 mm, berat keseluruhan: 500 kg, jenis arus masuk: tiga fasa, lebar total: 160 mm, panjang total: 200 mm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Il tagliacarte MOHR 80 è progettato per un funzionamento a turno singolo. Il taglio preciso e delicato a movimento oscillante viene eseguito idraulicamente. Il tempo di permanenza della lama nel punto morto inferiore può così essere adattato al materiale. La superficie ultra-liscia del tavolo in acciaio inox, dotata di getti d’aria, consente una movimentazione agevole del materiale. La pressione del pressino può essere regolata in modo continuo e preciso per ciascun materiale tramite una manopola graduata, all’interno di un ampio intervallo di impostazione. I LED ad alta luminosità segnano chiaramente la linea di taglio, ben visibile all’operatore. Il controllo della macchina si effettua tramite un display touch-screen ergonomico da 18,5’’. Sequenze di taglio ricorrenti possono essere memorizzate (capacità di memoria: 1.998 programmi) e adattate in qualsiasi momento. Integrato nel flusso di lavoro digitale, i dati di taglio vengono trasferiti direttamente dalla prestampa a Compucut®, tramite file ppf o jdf; Compucut® genera automaticamente il programma di taglio, che può essere avviato tramite lettore di codici a barre per ridurre quasi a zero i tempi di set-up. La visualizzazione del processo mostra graficamente la movimentazione del materiale, minimizzando il rischio di errori. Per ottimizzare la qualità di taglio, il tempo di pre-pressatura può essere adattato in base al materiale. Lettore di codici a barre per la creazione automatica del programma di taglio e caricamento del programma associato tramite Compucut® Visualizzazione del processo per la rappresentazione grafica della gestione del materiale e riduzione del rischio di errori Telaio macchina con stabilità ottimizzata per assorbire efficacemente le forze di taglio e ottenere la massima precisione Minime esigenze di manutenzione grazie all’impiego di materiali innovativi Dsdpsxwnxgofx Afteup Larghezza di taglio 800 mm | 31,49 in Profondità di alimentazione 800 mm | 31,49 in Altezza massima di alimentazione 100 mm | 3,93 in Pressione minima pressino 180 daN | 397 lbs Pressione massima pressino 2.700 daN | 5.953 lbs Velocità di ritorno del carrello (0 - ...) 130 mm/sec 5,12 in/sec Taglio minimo automatico senza piastra falsa 15 mm 0,60 in Taglio minimo automatico con piastra falsa 50 mm 1,96 in Dimensioni (L × P × H) 1.430 × 1.970 × 1.500 mm 56,29 × 77,55 × 59,05 in

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, mesin pengemas Dsdpfewpx Uxox Afteup

Kondisi: baru, Tahun pembuatan: 2024, panjang poros di bawah kepala: 80 mm, panjang ulir: 55 mm, kecepatan perjalanan (maks.): 480 mm/menit, EW MENN GW63 Flat Die Thread Rolling Machine Fully overhauled to as-new condition. Fitted with new guides, new vibrator, and new vibrating discharge chute. New electrical system with inverter and PLC. Thread size: M8 x 80/55 mm. Dusdst Uucaspfx Aftep Production rate: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Die length: 115 / 130 mm. Available for inspection and testing at HBR srl - Calolziocorte (LC), Italy.

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, saluran warna: 5, berat kertas (min.): 40 g/m², berat kertas (maks.): 370 g/m², lebar kertas (min.): 400 mm, lebar kertas (maks.): 800 mm, tinggi kertas (min.): 260 mm, tinggi kertas (maks.): 600 mm, tegangan masuk: 380 V, en001 Dedpfx Aowtzp Tsftoup

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.060 kg, tinggi total: 1.800 mm, lebar total: 1.830 mm, panjang total: 2.000 mm, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 800 mm, panjang umpan sumbu Z: 50 mm, kecepatan spindel (maks.): 3.200 rpm, berat benda kerja (maks.): 25 kg, daya: 2,2 kW (2,99 hp), kebutuhan udara: 750 m³/jam, tekanan kerja: 6 batang, jumlah spindel: 12, berat kosong: 975 kg, masa garansi: 12 bulan, Programmable boring machine with easy-smart-touch software, 3 controlled axes X, Y, Z, with the option to machine grooves and perform simple milling operations (accessory). Suitable for top-side and through-feed panel processing. Panel movement via triple suction cup system. Machine built in compliance with CE standards. STANDARD EQUIPMENT DRILLING UNIT: Head with independent spindles - 7 vertical spindles - 1 double horizontal spindle TH1 (X axis) for front/rear drilling MANUAL PANEL ALIGNMENT DEVICE PANEL END READER for perfect jointing Dusdpfsu U Hgijx Aftjp Remote assistance software Extraction flange ANTI-SCRATCH BRUSH TABLE to prevent dust and chip accumulation Selectable operating mode: operator side or continuous cycle HARDWARE & SOFTWARE 12” touch screen with NO TEXT patented MAGGI system USB and Ethernet ports for file import, online support, and software updates System based on Linux kernel CNC memory for up to 1,000 programs Packaging: Wrapped on pallet (2200x2050x160 mm - 123 kg)

Kondisi: baru, Tahun pembuatan: 2025, C3T model: Working area: 3048mm x 1524mm Laser output power: 6000W / 3000W / 2000W / 1500W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double High-Speed Exchange Tables The fast exchange of two tables significantly increases efficiency. The chain-driven system offers greater rigidity and higher accuracy, saving feeding time. 2. Tenon-and-Mortise Welded Bed Frame Utilizes traditional Chinese tenon-and-mortise structure to enhance load-bearing capacity. Welded joints and the structural support ensure long-term operational stability. The welded frame improves vibration absorption, reducing deviations caused by impacts and enabling more precise cutting. 3. Dual Automatic Self-Centering Electric Chucks The dual electric chucks with automatic self-centering function are easy to operate and low-maintenance. The brand-new motor provides precise control. Independently developed modular chuck components can be quickly replaced. 4. Auto-Focus Laser Cutting Head By setting separate focal lengths for piercing and cutting, cutting precision is improved. Suitable for various focal lengths, with the focal position automatically adjusted according to the thickness of different sheets. 5. Extended Aluminum Beam Aerospace-grade material with increased rigidity greatly reduces beam deformation during high-speed operation, improving high-speed directional sensitivity and processing efficiency. Dsdpfsg D Nz Rjx Aftsup