Wenzel LH108 dengan CMM Manager dan TP20

Wenzel LH 108

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table Ljdpjt Hw Nyjfx Al Njad • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Untuk dijual: Generator uap: VEA mod. UNIVEX 25G H13 + sistem pengolahan air dan reverse osmosis BWT -Daya: 1325 kW -Kapasitas: 2500 kg/jam -Tekanan maksimum: 13 bar -Suhu operasi: 195°C -Burner: WEISHAUPT (tahun produksi 2016) -Tahun produksi: 1999 Lsdpfxjucvi Ns Al Nead -Dokumentasi lengkap -Sistem pengolahan air modern dan lengkap: BWT tag: Boiler uap, Generator uap, Boiler industri, Pengolahan air, Burner minyak, Instalasi uap, Industri energi, Sistem tanpa pengawasan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.000 mm, rentang pengukuran sumbu Y: 3.000 mm, rentang pengukuran sumbu Z: 800 mm, Rentang Pengukuran Sumbu X 1.000 mm Sumbu Y 2.000 mm Sumbu Z 800 mm Panduan Granit Sumbu yang Dilumasi dengan Udara Akurasi Pengukuran Penyimpangan pengukuran panjang sekitar 1,3 µm ditambah L 400 tergantung pada model dan kondisi kalibrasi Sistem Probe Probe Renishaw tersedia Pemicu Sentuh dan Pemindaian PH10 TP20 SP25 SP80 tergantung pada konfigurasi Lsdpfx Aley Ewgxe Njad Berat Benda Kerja Beban meja yang diizinkan hingga sekitar 2.000 kg tergantung pada model Pengendali Pengendali CNC dengan perangkat kendali manual Perangkat Lunak Metrosoft CM Versi 3.112 WENZEL Quartis R16 Pasokan Listrik 230 V 50-60 Hz Konsumsi daya sekitar 1 kVA Pasokan Pneumatik Udara bertekanan 6 hingga 10 bar difilter dan kering

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 199102, WENZEL LH 108 CNC Coordinate Measuring Machine Manufacturer: WENZEL Model: LH 108 Design: CNC 3D Coordinate Measuring Machine (Bridge-type construction) For sale is a precise and high-performance coordinate measuring machine, WENZEL LH 108. This machine is ideally suited for quality assurance, production metrology, as well as demanding measuring tasks in tool and mold making. The LH 108 impresses with its stable granite construction, air-bearing axes, and high measuring accuracy. Thanks to CNC control, both single and series measurements can be carried out efficiently. Technical Data Measuring range: approx. X 1000 / Y 1600 / Z 800 mm Laedpfx Aey Tnyfjl Njd Max. workpiece weight: up to approx. 2000 kg High measuring accuracy in the micron range Equipment Air bearings on all axes Granite guides for maximum stability Modern CNC controller with joystick operation Various probing systems (depending on configuration) Temperature compensation (model-dependent) Application Areas Quality assurance and incoming goods inspection Series and single part measurement Free-form surfaces and complex components Reverse engineering Miscellaneous Machine in used condition. Inspection possible by appointment.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, tahun perombakan terakhir: 2004, it-hu-01 Laodpfjg Ryqksx Al Nsd

Tahun pembuatan: 1986, Kondisi: belum diuji (bekas), 6-kops roterende vacuüm-afsluitmachine, gereviseerd in 2017. Wordt verkocht in huidige staat of getest en afgesteld volgens klantwens. Ledpfxof Rk Agj Al Njad

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, daya: 45 kW (61,18 hp), tegangan masuk: 400 V, Pārdošanā Spanner biomasas koģenerācijas stacija ar 9 vienībām. Modelis – BHKW45-8,0-V1.1 Ražošanas gadi – 2015-2017 Nominālā jauda – 6x45 kW, 3x50 kW Spriegums – 400 V Ledpfovcbtrjx Al Njad Frekvence – 50 Hz Strāvas veids – 3 fāzes Dzinējs – 8.0 L Cena norādīta par vienu vienību. 1 vienībā ietilpst: biomasas gazģenerators, ģenerators, kas pārveido gāzi elektrībā ar dzinēju, atsevišķas vadības skapji gazģeneratoram un ģeneratoram. Cena apspriežama. Lūdzu, skatiet pievienotos dokumentus. Vēlama saziņa rakstiski – e-pastā vai Whatsapp.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm Laodeuu Ntgspfx Al Nsd - Liczba miejsc na narzędzia w magazynie: 8 - Stół roboczy: stół rastrowy aluminiowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Nr seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 - praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramowa: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 r. - jedna umieszczona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h. Interfejs do odczytu formatów CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, Fungsionalitas: berfungsi sepenuhnya, • Used for machining lock handle slots, hinge and espagnolette recesses, as well as channels of desired lengths on aluminum and plastic profiles. • Copying apparatus suitable for the required operation. Lodercm D Dopfx Al Nead • Capability to machine various channels independently from the copying apparatus with the help of a stopper. OPTIONS • Lower cabinet system • Pneumatic system

Kondisi: seperti baru (mesin pameran), Demo unit with under 20 operating hours // EXCELLENT CONDITION System: Optiv M 6.6.4 multisensor coordinate measuring machine with Dual Z technology Probes and Sensors: - 10x CNC motorized zoom with digital color camera and 12-segment LED ring light - HPsS-X1H scanning sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1x M3) - M3 stylus kit for HP-S-X1C sensor - HR-X probe rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - 25 mm glass reference standard - 20 mm ring gauge Computer and Software: - PC-DMIS CAD++ measurement and analysis software - BEST machine control unit - Dell 27" monitor - Work table Optional Accessories: - Chromatic white light sensor (CWS) Ledpfx Alsncfd Re Nsad - CWS probe head 3 mm - Solara.MP12 - QS STAT 12 - O-QIS 12 Delivery, commissioning, and additional services upon request Upon request, the measuring device can be retrofitted from OptiCheck3D V 5.0