Mesin cemoohan

SUNNEN MBC1804

Kondisi: sangat baik (bekas), Honing diameter: 1.5 – 165 mm Stroke: 80 – 160 mm Spindle speeds: 200 – 2,500 rpm Stroke speed – under load: 80 – 310 strokes/min Total power requirement: 0.9 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measurement control Includes workpiece holders, small measurement table, digital gauge, tool accessories, Iasdowva Rnopfx Afier

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Ijdpfx Afox I Rtkjisar Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, excellent, like new, no signs of wear, includes new maintenance and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range of top slide: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Headstock spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal: 0.02 – 0.63 mm/rev Face: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight without packaging and accessories: approx. 1150 kg Length / Width / Height, net: 1720x890x1700 mm Headstock / Rear panel / Sliding safety cover: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Kondisi: bekas, Mesin honing SUNNEN MBC1804 Iajdpfx Aoxbtyqefier

Kondisi: bekas, cylinder bore diameter 165 mm stroke 120 mm center height 100 mm total power requirement 1.5 kW machine weight approx. 1 t SUNNEN (USA) horizontal automatic honing machine type: MBC 1804 G year of manufacture: 1K1-90075 Honing diameter range – Ø with measuring control 1.5 – 51 mm with automatic stroke 1.5 – 95 mm with manual stroke 1.5 – 165 mm Max. workpiece length approx. 400 mm Max. workpiece length with measuring control 254 mm 12 spindle speeds 200 – 2,500 rpm 5 stroke rates 80 – 310 strokes/min Stroke length with automatic stroke 6 – 120 mm Honing spindle drive/stroke motor 0.75 / 0.37 kW - 380 V - 50 Hz total drive approx. 1.5 kW - 380 V - 50 Hz Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shut-off when target diameter is reached. • Electromechanical measuring control opposite the tool spindle for mounting a measuring probe corresponding to the target diameter, which triggers the automatic shut-off. • Infinitely variable expansion pressure adjustment • Foot switch for manual operation • Built-in honing oil supply • Operating manuals. Unfortunately, no tool holders or other accessories included. Iedpfx Afow U U Iqjiear Condition: Very good condition! Suitable for all honing tasks! A video of the machine will be available shortly—please click here. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice.

Kondisi: bekas, Table clamping surface 170 x 170 mm Clamping surface of the base plate 170 x 170 mm Throat depth 185 mm Quill stroke 65 mm Iedpovh Nbbjfx Afiear Spindle speeds 500 / 896 / 1473 / 2428 rpm Column diameter 65 mm Total power requirement 0.37 kW

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), de-hu-it-lt-2024-06-13-1 Iaedpfswbuyzex Afisr

Kondisi: bekas, Tahun pembuatan: 2013, Swing diameter . mm Turning length 2000 mm Control system: Siemens 840 D sl Main spindle: Max. speed 3800 rpm Main spindle: Max. torque 1200 Nm Quill diameter 140 mm Centre taper MK6 Quill force 5 – 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis – mm/min Rapid traverse X-axis 25 m/min Total power consumption 125 kW Machine weight approx. 20 t The machine is still under power and can be inspected at the seller's premises. It is in good condition, and the machining accuracy for turning operations is very good. The milling drive is not functional. A repair quote from Niles for the milling drive is available on request. Iajdpfx Asvu E R Sofier Including hydraulic steady rest.

Kondisi: sangat baik (bekas), Tacchi HD/1450 X 4M Lubang Spindel Besar (515mm) Tahun 2002 Kontrol CNC Siemens Diameter ayunan di atas alas: 1450 mm Diameter ayunan di atas eretan: 1000 mm Spindel berlubang 515 mm Iaodpfsxg Ivdex Afior Chuck depan dan belakang kepala utama Rentang kecepatan: 1,5 – 450 rpm Berat di antara senter: 15.000 kg Baruffaldi 4 arah auto toolpost 2 x steady rest 3 titik

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of Manufacture: 2021 Iasdsx Ivy Nspfx Afijr Condition: Used, very good, as new; includes new service and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swiveling range: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool shank cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / Rear panel / Sliding safety guard: Light Grey RAL 7035 Machine base / Bed: Basalt Grey RAL 7012 Digital display housing: Blue NCSS 4550-R80B

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 Iaedst Hw N Hjpfx Afisr _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.