Pengering uv

Superfici MV40 1300m/m Wide Roller Coater

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Wide Belt Sander DMC USK 1350 M3 - Made in Italy - Cross-belt unit (so-called 'sergeant') - Year of manufacture: 2011 - Electric and pneumatic ionizer TECHNICAL PARAMETERS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: - Cross-belt (so-called "sergeant") - Motor power: 12 kW 2nd unit: - Rubber drum - Hardness: 95 Shore - Diameter: 240 mm Njdpogr Er Sefx Agyewp - Motor power: 18.5 kW 3rd unit: - Rubber drum - Hardness: 55 Shore - Drum diameter: 300 mm - Motor power: 15 kW 4th unit: - Pneumatic pad - Motor power: 15 kW 5th unit – cleaning brush – 2.2 kW 6th unit – air blower - Belt air blowing - Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Suction port diameters: - 3 x 200 mm, 8 x 80 mm, - 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Machine in very good condition, little usage – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (angled cut) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Cast wheels, width: 130 mm Wheel diameter: 1200 mm Head raise/lower – double TR60x9 (18) ball screws + 11 kW Danfoss inverter + Siemens 3F motor with brake Electric head lift & lower motor: 11 kW Saw blade: PV 45, length: 8685 mm, thickness: 1.2 mm, width: 140 mm/150 mm Blade movement drive with electronic controls for forward and reverse, SEW reducer with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric cut-off Digital thickness setting with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l + 3 kW motor Complete hydraulic system Hydraulic blade guide left/right HIWIN linear system Hydraulic pre-cutter / bark blade 1 Nwedpfjw E Ei Uex Agyep Hydraulic board removal arm 1 Additional hydraulic board removal and alignment arm Side-mounted control panel Multifunction joystick, 2 positions: 1 Multifunction joystick, 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust extraction pipe + 4 pipe stands: 1 Water cooling – automatic hydrophore cooling (Aki Tech high-pressure pump): 1 Prepared for ramp and automatic table + diverter: 1 Diesel lubrication: 1 TRACK Welded frame, length: 14 m Hydraulic clamp with two cylinders: 6 Hydraulic wedge lifter: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Log lifter on holder – mechanical roller: 4 Log lifter on holder – hydraulic roller: 7 Set of lift rollers: 7 hydraulic + 4 mechanical: 1 Hydraulic log turner – new type: 3 Centric log aligner – complete: 4 Hydraulic unit 120 l, tank with one 50 l pump, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile bracket for ventilation – 4 double trolleys Belt output conveyor 4 m with 1 m feed + 3 kW electric motor, front end with hydraulic lift

Tahun pembuatan: 1999, Kondisi: bekas, en-GB: The DSG 200 vertical sawmill is an ideal solution for woodworking plants specialising in the production of furniture and wooden flooring. It is efficient and performs exceptionally well in operation. A used Wintersteiger mini sawmill is an excellent investment – one of its main advantages is its compact size compared to standard machines of this type, while still providing outstanding performance in material processing. It is designed for cutting components and adjusting them to the required dimensions. The machine is user-friendly and operators can quickly learn to use it proficiently. The key benefit of our sawmill is its comprehensive equipment, most notably the saw blade spray system controlled from the main panel, which enables precise cutting of wet material. The independent adjustment of the upper roller height allows for faster changeover of the cutting height. Pneumatic feed pusher assists material advancement. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel Nwedpfx Agetvm Hdeyep - Feed rate: up to 2 m/min - Sawmill frame stroke: 210 mm - Number of strokes: 400/min - Infinitely adjustable cutting height on our frame: 45–250 mm - Maximum possible cutting height: 400 mm! - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Kerf of used saws: 0.9–1.1 mm (depending on cutting height) - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg - Pneumatic feed pusher Included with the machine: - Complete large saw frame - Small saw frame - Frame pins - Frame tensioning wedges - Saw spacers - Wet cutting saw blades - Dry cutting saw blades - Set of upper drive rollers - 4 lower drive rollers - Full set of slideways - Frame yokes - Pocket cutting guides - Loading magazines - Technical documentation (DTR) - Electrical diagram

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, SMELT professional coating line with LED / All machines are used and still in good working condition. Njdpfx Aepyg Itsgyowp

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KME 2/750L, Clamping carriage for saw frame Nwsdpfx Agjv Umb Eoyep Inspection possible by appointment.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Good, used condition Few operating hours (1,675 h) Motor: 11 kW Throughput: up to max. 220 kg/h Briquette size: 150x60 mm Press dimensions: Nsdpfewcc D Rex Agyswp approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: approx. 500x1250x2120 mm (LxWxH) Weight: approx. 3,000 kg

Tahun pembuatan: 1985, Kondisi: baik (bekas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. IDROPRIMER SPREADER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE SPREADER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE SPREADER Nwedpfsk Scufjx Agyjp 6. UV LAMPS 7. DMC SANDING MACHINE 8. CONVEYOR 9. SORBINI RETOUCH STAIN SPREADER 10. IR LAMPS 11. FINISHING ROLLER 12. UV LAMPS 13. OUTFEED CONVEYOR

Kondisi: baru, de-en-001 Nwodsiiv Dcopfx Agyjp

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 220992, STROMAB TR 500 MATRIX CROSSCUT SAW WITH ELECTRONIC PUSHER – CE STANDARDS – USED - Infeed roller table with 6000mm MATRIX electronic pusher - Outfeed table: 1500mm - Motor: 10 HP - Blade diameter: 500mm - Blade speed: 3500 rpm Nwsdst U I A Hspfx Agyop - Maximum cutting capacity: 360 mm (W) x 55 mm (H) – 200 mm (W) x 135 mm (H) - Minimum cutting section: 20 mm (W) x 10 mm (H) - ELCO CNC control - 415 Volt - Serial no. 220992 - Year: 2002

Tahun pembuatan: 2009, jam operasional: 214 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, DSG Sonic Thin-cut Frame Saw – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical Data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of saw frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For basic machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height variation: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Other technical data: Cutting width with central fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss during cutting (kerf thickness): from 0.9 mm Saw blade lifespan (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): For the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator’s workplace: - Idle run: 85 dB(A) Nwodpfx Agow Dp Ufjyop - Cutting: 88 dB(A) 🌬️ Extraction system and air: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply terminal cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²