Mesin superfinishing

SUPFINA 622/1

Tahun pembuatan: 2008, Kondisi: baik (bekas), Machine type: Finishing machine Fsdpfx Aelrt Sasdqjpn Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial Number: 760001 Year of manufacture: 2008 Available immediately Ex works, to be dismantled by buyer Dismantling and loading can be offered as an option.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4304, diameter meja putar: 600 mm, tinggi penggerindaan: 450 mm, berat keseluruhan: 14.500 kg, The machine is equipped with 3 spindles: surface grinding, external grinding, and bore grinding. Turret head with B-axis featuring 1° indexing. Belt filter system included. Fpsdpsvt A Rtsfx Adqsn

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base Fodpfx Adjuz If Nsqopn - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: diremajakan ulang (bekas), Centerless cylindrical grinding machine MONZESI ROSSI MONZA 1500 currently undergoing refurbishment and complete electrical/electronic retrofit Equipped with Siemens electronics featuring a touchscreen interface, brushless motors on the Z-axis (workpiece diameter adjustment) and regulating wheel (variable speed control), stepper motor for incremental grinding wheel dressing, and automatic size compensation following grinding wheel dressing. Fpedsmmqirspfx Adqon Grinding wheel dimensions: 350 mm x 610 mm diameter The machine is available for inspection at our warehouse in Gussago (BS), Italy. Plunge grinding process In the plunge grinding process, workpieces with stepped or contoured outer surfaces, such as injection needles, valves, crossheads, as well as gearbox and electric motor shafts, are machined. Available technologies include straight or angular plunge grinding, single or multi-piece plunge grinding, plunge grinding in multiple operations (simultaneous or sequential), and oscillating plunge grinding. Through-feed grinding is used for the machining of unprofiled workpieces, such as cylindrical and tapered rollers, rings, bars, and hydraulic spools. This grinding method is highly productive and is primarily used for series- and mass-production of precision components.

Kondisi: bekas, Tahun pembuatan: 2003, Travel X 800 mm Travel Y 600 mm Travel Z 805 mm Control unit: Sinumerik 840D Machine weight approx. 13 t 1 horizontal machining center Manufacturer: HECKERT Model: CWK 500D Year of manufacture: 2003 Serial no.: 16087 Fpedouddgfjpfx Adqsn Control, make: Siemens, type: Sinumerik 840D Travels X/Y/Z: 800 x 600 x 805 mm 2-station pallet changer Pallet size: 500 x 500 mm NC rotary table: 360 x 0.001° 60-position tool changer Tool holder: HSK 63 Max. spindle speed: 15,000 rpm Coolant through spindle (IKZ): 50 bar Operating hours: 32,450 Spindle hours: 6,080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Preparation for infrared measuring probe

Kondisi: bekas, en1 Fodpeu Ngybsfx Adqjpn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, lebar total: 4.000 mm, berat keseluruhan: 5.000 kg, diameter benda kerja (maks.): 140 mm, panjang produk (maks.): 2.000 mm, jumlah sumbu: 2, Mesin penggiling luar tanpa senter Schaudt Mikrosa SASL 125 ini diproduksi pada tahun 1989. Sebagai mesin penggiling luar tanpa senter, mesin ini memiliki pengoperasian yang dikendalikan oleh CNC dan bantalan poros hidrodinamik. Kedua roda pengasah dapat disesuaikan melalui poros yang dikendalikan. Mesin ini diperbarui dan dirawat secara berkala oleh UHLMAN Werkzeugmaschinen-Service pada tahun 2021/22. Manfaatkan kesempatan untuk mendapatkan mesin penggiling tanpa senter Schaudt Mikrosa SASL 125 ini. Hubungi kami untuk informasi lebih lanjut. Dilengkapi dan diperbarui pada tahun 2021/22 Area kerja: Fpodpjx Enapsfx Adqjn • Diameter benda kerja maksimum • yang dapat digiling • dengan roda pengasah Ø 500 mm: 140 mm • Diameter benda kerja maksimum • yang dapat digiling • dengan roda pengasah Ø 630 mm: 80 mm • Diameter benda kerja minimum yang dapat digiling: 3,5 mm • Panjang benda kerja maksimum saat penggilingan kontinu: 200 mm • Panjang benda kerja maksimum saat penggilingan dengan penekanan: 245 mm • Kedalaman profil maksimum yang dapat digiling pada benda kerja: 25 mm Roda pengasah: • Diameter luar maksimum: 500 atau 630 mm • Diameter luar minimum: 380 mm • Lebar roda pengasah maksimum: 250 mm • Lubang roda pengasah: 305 mm • Roda panduan: • Diameter luar maksimum roda panduan: 315 mm • Lebar maksimum roda panduan: 250 mm • Diameter lubang: 127 mm Kebutuhan daya: • Konsumsi daya sekitar 33 kW Peralatan tambahan • Opsional: Peralatan tambahan tersedia Keunggulan mesin Keunggulan teknis mesin • Bantalan poros hidrodinamik • Perawatan berkala selama produksi massal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 6.361 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: 840D ShopMill, panjang benda kerja (maks.): 900 mm, lebar benda kerja (maks.): 560 mm, tinggi benda kerja (maks.): 630 mm, berat benda kerja (maks.): 600 kg, tinggi total: 3.000 mm, panjang total: 4.000 mm, lebar total: 5.000 mm, lebar meja: 900 mm, panjang meja: 560 mm, beban meja: 600 kg, berat keseluruhan: 5.000 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 6.361 h, hidung spindel: SK40 (DIN69871), jumlah spindel: 1, jumlah slot dalam magazin alat: 30, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mesin DMG MORI ecoMill 600V buatan Jepang ini kami ambil dalam kondisi operasional langsung dari produksi dan masih dalam keadaan bersih. CMX 600V (ecoMill 600V) dilengkapi dengan konstruksi rangka-C (konfigurasi klasik) dan meja yang dapat bergerak (sumbu-X), dirancang untuk pekerjaan milling umum/serbaguna. Fedpfx Adjy Dg Euoqepn Opsi & aksesori tambahan: - Siemens 840D SlimLine termasuk simulasi 3D. - PROGRESSLine (menampilkan sisa waktu produksi dan jumlah produk untuk satu proses pemesinan penuh). - Konveyor serbuk serpihan - Pistol pembilas - Persiapan untuk pendinginan internal. - Dokumentasi asli

Kondisi: bekas, Grinding wheel dimensions (OD x ID x width): Ø 650 x Ø 304.8 x 500 mm Min./max. grinding diameter: 3 / 200 mm Regulating wheel width: 500 mm Number of regulating wheel speeds: Infinitely variable Fpodpfx Adjix N Enoqen Min./max. regulating wheel speed (rpm): 10 / 255 rpm Dressing (auto/manual): Longitudinal auto, manual infeed for both wheels Dressing speed: 255 rpm Number of CNC axes: 1 Regulating wheel dimensions (OD x ID x width): Ø 350 x Ø 203.2 x 500 mm Grinding wheel width: 500 mm Max. plunge grinding length: 500 mm Grinding wheel motor power: 55 kW Hydraulic motor power: 3 kW Total power: 60 kW Voltage: 220/380V Length: 2,300 mm Width: 2,800 mm Height: 2,100 mm Weight: 15,000 kg

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), A Hurco CNC 3-axis milling machine is available. Travel distance X/Y/Z: 760mm/510mm/610mm, table size X/Y: 1020mm/510mm, max. table load: 1360kg, spindle speed: 10,000 rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control system: Hurco Ultimax, spindle hours: approx. 10,500h. Documentation available. On-site inspection possible. Fpjdpew Dfg Dsfx Adqon